
Star-Delta vs Soft Starter: Motor Starting Methods
Connecting a large electric motor directly to the grid and running it seems like the simplest method at first glance; but this often leads to serious problems. At start-up, the mo... More Details

Connecting a large electric motor directly to the grid and running it seems like the simplest method at first glance; but this often leads to serious problems. At start-up, the mo... More Details

When a maintenance manager gives their boss a budget based on the motor price alone, the total cost at the end of the job is almost always higher. A motor does not turn on its own:... More Details

Compressors are the machines that produce compressed air in industry; they are the lifeblood of production lines and many pneumatic systems. The electric motor that drives these ma... More Details

The moment an electric motor is first energized is one of the most demanding moments it experiences throughout its working life. A stationary asynchronous motor draws a current far... More Details

When an electric motor is fed from the mains, the high current it draws at the moment of starting often goes unnoticed, because the city grid behaves like an almost unlimited sourc... More Details

Connecting an electric motor directly to the mains and switching it on is not always the wise choice. In medium and high power three-phase motors especially, the current drawn at t... More Details

A quotation request from a quarry operator was one line long: "110 motor for the crusher, price?" When we called back it turned out the machine was a primary jaw crusher, the exist... More Details

Whether a motor is connected in star or delta is decided by the voltage on its nameplate, not by its power. A motor rated 230/400 V is connected in star on a 380–400 V supply, whil... More Details

A 15 HP requirement is met in practice by an 11 kW motor, and our shop offers four frame/speed options at this rating: the 3000 rpm DRG-160M1-2, the 1500 rpm DRG-160M-4, the 1000 r... More Details

The starting decision for a 30 HP 1500 rpm motor rests on two numbers: when the DRG-180L-4 is connected directly to the supply, it draws 7.8 times its rated current at start, about... More Details

A tyre shredder motor is a 4- or 6-pole three-phase motor that works with a gearbox on a twin-shaft shredder and produces high torque at low shaft speed; when choosing it, the star... More Details

A wood chipper or wood-chip mill motor is chosen from two groups depending on the machine: on a disc or drum chipper that turns logs into chips, a 4-pole motor that drives the heav... More Details

A hammer mill motor is a 2-pole (3000 rpm class) three-phase motor that turns the heavy hammer rotor either direct-coupled or by belt, and what decides the selection is not only th... More Details

In an industrial centrifugal dryer, what sizes the motor is the kinetic energy stored by the rotating basket and how quickly you want to put that energy in and take it out again, b... More Details

The motor of a plastic agglomerator (densifier) is chosen so it can bring the bladed drum up to speed when empty and keep current below the nameplate value while filling; the real ... More Details

The main motor of an eccentric press does not push the ram directly; it turns the flywheel through belts and stores energy in it. When the clutch engages, this energy passes throug... More Details

In a scrap shear the electric motor does not produce the cutting force itself; it drives the hydraulic pump, and the cylinder and pressure produce the force. What decides the motor... More Details

On a water-based glue (PVAc dispersion, white glue) mixing machine, the motor is decided less by rated power than by the moment of starting. Thick glue gels as it stands in the ves... More Details

A star-delta power circuit is the main current path between the supply and the motor: a Q1 protective device, a K1 main contactor, a K2 star contactor, a K3 delta contactor and an ... More Details

A star-delta control circuit is the low-current circuit that decides in which order the K1 main, K2 star and K3 delta contactors of the power circuit close. When the start button i... More Details