
355 kW 3000 Rpm Electric Motor
355 KW 3000 RPM ELECTRIC MOTOR CONTACT: +90 542 666 11 11 The 355 kW electric motor, operating at 3000 revolutions per minute, is built to deliver long-term, uninterrupted, and r... More Details

355 KW 3000 RPM ELECTRIC MOTOR CONTACT: +90 542 666 11 11 The 355 kW electric motor, operating at 3000 revolutions per minute, is built to deliver long-term, uninterrupted, and r... More Details

High-kW electric motors running at 3000 rpm combine high speed with high power through their two-pole design. They are used in large centrifugal pumps, high-pressure fans and blowe... More Details

Low-kW electric motors running at 3000 rpm are designed for high-speed light applications thanks to their two-pole construction. They are common in small pumps, fans, compact machi... More Details

Our Quick Access Phone Numbers: +90 (542) 666 11 11 +90 (533) 777 04 44 Mail : info@drgmotor.com A three-phase induction motor turning at 3000 rpm sits at the top... More Details

In high-kW electric motors, speed is chosen by the speed and torque the application requires. The 1000, 1500 and 3000 rpm options correspond to 6, 4 and 2-pole motors respectively,... More Details

DRG motors rated at 250 kW and 3000 rpm are built for heavy-duty applications that demand both high speed and high power. Thanks to their 2-pole design, these motors deliver a spee... More Details

DRG MOTOR 1.1 kW 3000 RPM NEXT-GENERATION ELECTRIC MOTORS Contact: +90 (542) 666 11 11 The Drg Motor 1.1 kW 3000 RPM Next-Generation Electric Motors deliver high-speed performanc... More Details

DRG MOTOR 3 kW 3000 RPM NEXT-GENERATION ELECTRIC MOTORS Contact: +90 (542) 666 11 11 A 3 kW two-pole machine is accepted or rejected on numbers taken at commissioning, not on a d... More Details

The DRG Motor 11 kW 3000 rpm electric motor is a high-speed three-phase induction motor with a 2-pole construction. On a 400 V / 50 Hz supply, this class has a synchronous speed of... More Details

The centrifugal pump's nameplate reads "2900 rpm", the motor has burnt out and the replacement must run at the same speed. This article is written only for buyers in that situation... More Details

Frequency inverters can slow an electric motor down, and they can also push it above its rated speed. However, making a motor turn faster is not simply a matter of raising the freq... More Details

The single most important factor in determining the efficiency of a compressor line is the choice of the right drive motor. Whether the unit is a piston, screw, or scroll compresso... More Details

When you choose a motor for a machine, the first technical decision often comes before power itself: how fast should the motor turn? The answer is tied directly to the number of po... More Details

A greenhouse operator called us to replace the burned-out motor of a centrifugal pump that delivers water from a well to a storage tank. All they knew was the motor power: 11 kW. W... More Details

Halfway through a shift, a 37 kW rotary screw compressor trips on its overload relay, and on the second attempt there is a burning smell coming from the motor. The maintenance supe... More Details

At the same power, a 2-pole motor runs at about 3000 rpm and a 4-pole motor at about 1500 rpm; because the speed is halved, the shaft torque of the 4-pole motor is roughly twice as... More Details

The same 10 HP (7.5 kW) output comes with three different shaft torques at three different speeds: the 3000 rpm DRG-132S2-2 produces 24.4 Nm, the 1500 rpm DRG-132M-4 49.1 Nm and th... More Details

Short answer: in the 10 HP (7.5 kW), 3000 rpm class DRG's model is the DRG-132S2-2. This 2-pole motor in a 132S frame runs at 2930 rpm at full load, draws 13.7 A at 400 V and produ... More Details

If you need a "20 HP 3000 rpm" motor for a centrifugal pump, the match is the DRG-160M2-2: 15 kW, 2-pole, cast-iron 160M frame, 2945 rpm at full load. The motor draws 27.9 A at 380... More Details

On the market, "2800 rpm" refers to small 2-pole three-phase motors with a synchronous speed of 3000 rpm. In DRG data the actual plate speeds of this class are: 0.25 kW 2730, 0.37 ... More Details