In short: horsepower (HP) and kW are two different units that both measure the power of an electric motor. In everyday talk people say "horsepower", but the nameplate and catalogues give the power in kW. The conversion is simple: 1 HP is about 0.746 kW. When ordering, the safest thing is to say kW; if all you have is horsepower, the table below turns it into kW in a moment.
DRG Motor is a manufacturer, supplier and seller of electric motors. Once the HP-versus-kW confusion is cleared up, you can find the electric motor that fits your need straight by kW power in the online electric motor shop, and see all models together in the three-phase asynchronous electric motors category.
Are HP and kW two names for the same thing?
Yes, both describe power. HP (horsepower) is the traditional unit you still hear on the shop floor, while kW is the international (SI) unit of power. So a "5 HP electric motor" and an "about 4 kW electric motor" actually refer to the same size; they are just said in different languages.
The confusion comes from habit. On site a fitter says "this job needs 10 HP", but the nameplate you receive almost certainly shows kW. Once you can convert between them, the mismatch disappears completely.
How many kW is 1 HP, and how do I convert?
The basic rule is one line: 1 HP ≈ 0.746 kW. The reverse helps too: 1 kW ≈ 1.34 HP. To turn HP into kW, just multiply the HP figure by 0.746.
A worked example: 10 HP × 0.746 = 7.46 kW. In the market this is sold as the nearest standard power, 7.5 kW. By the same logic 5.5 HP is about 4.1 kW and rounds to a standard 4 kW. As you can see, the number from HP rarely lands on a round value, so you look at the nearest standard kW step.
Click to see current electric motor prices and order nowSEE PRICES →
HP-to-kW conversion table
The table below puts common HP values, the approximate kW from the 0.746 factor, the standard kW step on the market and an example DRG electric motor at that power side by side. Click a model code to open its product page.
| HP | Calc (× 0.746) | Standard kW | Example DRG model |
|---|---|---|---|
| 5.5 HP | ≈ 4.10 kW | 4 kW | DRG-112M-4 |
| 7.5 HP | ≈ 5.60 kW | 5.5 kW | DRG-132S-4 |
| 10 HP | ≈ 7.46 kW | 7.5 kW | DRG-132M-4 |
| 15 HP | ≈ 11.19 kW | 11 kW | DRG-160M-4 |
The "standard kW" steps are the established power values at which electric motors appear in catalogues. Even if the figure from HP does not land exactly on a step, the nearest standard kW is the right choice.
When ordering, should I say HP or kW?
The most practical route is to say kW. Nameplates, catalogues and product pages all give power in kW, so saying kW shows the exact step you want with no conversion in between. If all you have is an HP figure (say an old fitter said "5 HP"), first find the kW from the table above or the 0.746 factor, then state that kW.
You can also say both: "10 HP, that is about 7.5 kW" puts everyone at ease. What matters is that you express the power as a clear number and add the speed (or number of poles) next to it, because the same power exists at different speeds.
The nameplate says kW, the fitter says HP — how do I match them?
A very common situation. Your old electric motor's nameplate may read "4 kW", while the repairer calls it a "5 HP motor". There is no contradiction: multiply 4 kW by 1.34 and you get about 5.4 HP, which the fitter rounds to "5 HP" in everyday speech. So the nameplate and the fitter describe the same electric motor.
When replacing, the soundest method is to take the kW value from the old electric motor's nameplate as your reference. HP can drift from mouth to mouth; the kW on the plate is the product's real identity. To be sure, send us a photo of the nameplate and we will settle the kW and the right model together.
Example: what power is a "5 HP motor" really?
In everyday talk a "5 HP" electric motor is 5 × 0.746 = 3.73 kW, which matches the nearest standard step of 4 kW. So if someone says "I need 5 HP", you should look at a 4 kW electric motor in the shop. The same 4 kW exists at different speeds, for example 1500 rpm (4 poles) or 3000 rpm (2 poles). That is why, after converting HP to kW, you also need to talk about the speed.
You can filter every power and speed option by kW in the online electric motor shop and compare them easily.
You have converted HP to kW; now click to pick the right power, see current prices and place your orderSEE PRICES
Frequently asked questions
Exactly how many kW is 1 HP?
In practice 1 HP is taken as 0.746 kW, so 1 kW is about 1.34 HP. For everyday choices these values are more than enough; multiply the HP by 0.746 and look at the nearest standard kW step.
Why doesn't the number from HP land exactly on a kW value?
Because electric motors are made at fixed standard kW steps (for example 4; 5.5; 7.5; 11 kW). Converting HP gives an in-between value; the right move is to choose the nearest standard kW. The "standard kW" column in the table shows exactly that.
Will the seller understand if I say HP?
Usually yes, but the clearest route is to say kW. If you say HP, the other side will convert it to kW and ask you to confirm anyway. To save time, say "so many HP, that is about so many kW", and add the speed (or number of poles) so the choice settles in one go.
Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp
Electric Motors Related to This Topic — Models and Current Prices
Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.
4 kW Three-Phase Motor 1500 rpm – DRG-112M-4 Aluminium
- 4 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 112M
- Shaft: 28 × 60 mm
5.5 kW Three-Phase Motor 1500 rpm – DRG-132S-4 Aluminium
- 5.5 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 132S
- Shaft: 38 × 80 mm
5.5 kW Compact Three-Phase Motor 1500 rpm – DRG-112M-4K Aluminium
- 5.5 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 112M
- Shaft: 28 × 60 mm
7.5 kW Three-Phase Motor 1500 rpm – DRG-132M-4 Aluminium
- 7.5 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 132M
- Shaft: 38 × 80 mm
11 kW Three-Phase Motor 1500 rpm – DRG-160M-4 Aluminium
- 11 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 160M
- Shaft: 42 × 110 mm
11 kW Compact Three-Phase Motor 1500 rpm – DRG-132M-4K Aluminium
- 11 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 132M
- Shaft: 38 × 80 mm
















