"10 kW electric motor" is a common search, yet the IEC rated-power steps do not include a three-phase asynchronous motor at exactly 10 kW. The closest standard power is 11 kW, and the real answer to a 10 kW need is almost always an 11 kW three-phase asynchronous motor.
DRG Motor is a manufacturer, supplier and seller of electric motors. You can review every 11 kW three-phase model by speed and housing in the online motor shop, and see the same motors together in the three-phase asynchronous electric motors category.
Why isn't 10 kW a standard power?
Rated powers follow internationally agreed steps. In the medium-power range these run roughly 5.5 – 7.5 – 11 – 15 – 18.5 kW. Notice that the only intermediate step between 7.5 kW and 15 kW is 11 kW; there is no separate 10 kW rung. That is why a user looking for a "10 kW motor" always meets 11 kW in real products.
The 1 kW gap works in your favour: 11 kW comfortably covers a 10 kW load expectation and leaves a small margin for short peaks. So the answer to "isn't 10 kW enough?" is simply to choose 11 kW as the standard product.
11 kW: where the aluminium housing ends
11 kW matters in this range because it is the upper limit of the aluminium-housing three-phase line. At DRG the aluminium housing is offered from 0.25 kW up to 11 kW; powers above 11 kW come only in a cast iron housing. So at 10–11 kW you are on the last power step where both aluminium and cast iron are available at the same time.
The 11 kW models sit in the 160 IEC frame, while a compact four-pole option comes in the 132 frame. The same 11 kW is therefore available in different speeds and mounting dimensions.
11 kW three-phase asynchronous DRG models (aluminium)
Aluminium 11 kW motors are offered in three speed classes (2, 4 and 6 poles). The table below shows each model's pole/speed class, rated torque and rated current at 400 V; the codes link straight to the product page. The voltage on all of them is 400/690 V (Δ/Y).
| Model | Poles / Speed class | Torque | Rated current (400 V) |
|---|---|---|---|
| DRG-160M1-2 (aluminium) | 2-pole / 3000 rpm | 35.7 Nm | 19.6 A |
| DRG-160M-4 (aluminium) | 4-pole / 1500 rpm | 71.7 Nm | 20.4 A |
| DRG-132M-4K (compact, aluminium) | 4-pole / 1500 rpm | 71.7 Nm | 20.4 A |
| DRG-160L-6 (aluminium) | 6-pole / 1000 rpm | 108.3 Nm | 22.0 A |
The torque values can be checked with T = 9550 · P / n: at constant power (kW) torque rises as speed falls. That is why the 6-pole 1000 rpm model delivers noticeably more torque than the 2-pole 3000 rpm model of the same 11 kW. You can verify your speed and current with the electric motor calculator and the motor current chart.
Click to see current electric motor prices and order nowSEE PRICES →
Cast iron 11 kW option
The same 11 kW is also available in a cast iron housing; the electrical figures (power, speed, torque, current) are identical to the aluminium version, the difference is mechanical. Cast iron is heavier and more robust and is preferred where vibration and mechanical stress are high. The cast iron 11 kW models: DRG-160M1-2 (2-pole / 3000 rpm), DRG-160M-4 (4-pole / 1500 rpm) and DRG-160L-6 (6-pole / 1000 rpm). The choice is about the housing that best fits the need; both deliver the same 11 kW performance.
2, 4 or 6 poles: which speed suits your job?
The same 11 kW is offered at different speeds because an application usually needs a certain speed and torque rather than raw power:
- 2-pole (about 3000 rpm): high speed, low torque. Suited to high-flow pumps and fans.
- 4-pole (about 1500 rpm): the most common medium speed. A balanced choice for conveyors, compressors and general drives.
- 6-pole (about 1000 rpm): low speed, high torque. Preferred where heavy starting or low speed is required.
If you are replacing an existing motor, read the speed on its nameplate and keep the same pole count.
160 frame, shaft size and mounting
Most 11 kW models are in the 160 IEC frame with a 42×110 mm shaft; the compact four-pole option is in the 132 frame with a 38×80 mm shaft. When replacing an old motor, compare not only the power but also the shaft diameter, foot/flange dimensions and mounting type (B3 foot, B5/B14 flange); because couplings, pulleys and gearbox inputs are chosen by shaft diameter, this dimension is critical. For detail see the motor shaft diameter by kW table and the B5 motor flange dimensions table.
400/690 V wiring and commissioning
The 11 kW models are wound for 400/690 V (Δ/Y). On a 400 V three-phase supply the motor is connected in delta (Δ); on 690 V it is connected in star (Y). The nameplate states which connection matches which voltage. On a 400 V supply, star-delta starting is often used for this power class to limit the starting current. You can size the cable with the motor cable size calculator.
Before any electrical work, switch off the supply, confirm it is de-energised, and let only qualified electrical personnel make the connection. Set protection values such as the thermal current from the rated current on the nameplate and the panel documentation, not from memory.
Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp
Once you have picked the right 11 kW model, you can compare all speed and housing options and current prices through the shop.
See the models and current prices of 11 kW and neighbouring three-phase asynchronous motors in the shopSEE PRICES
Frequently asked questions
Are a 10 kW motor and an 11 kW motor the same thing?
In practice, yes. Since 10 kW is not made as a standard product, the answer to a 10 kW need is an 11 kW three-phase asynchronous motor; this 1 kW difference causes no load problem and even leaves a small margin.
How many horsepower (HP) is an 11 kW motor?
As 1 HP is about 0.746 kW, 11 kW corresponds to roughly 15 HP. Product pages state the power in both kW and HP.
What is the rated current of an 11 kW motor?
At 400 V it is about 19–22 A depending on the model; always check the motor nameplate for the exact value. The table above gives the current of each 11 kW DRG model.
Should an 11 kW motor be aluminium or cast iron?
11 kW is the last power step where an aluminium housing is available; choose aluminium if light weight matters and cast iron where vibration and mechanical stress are high. Both give the same electrical figures.
Electric Motors Related to This Topic — Models and Current Prices
Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.
11 kW Three-Phase Motor 3000 rpm – DRG-160M1-2 Aluminium
- 11 kW · 3000 rpm (2 poles)
- Aluminium frame · IEC 160M
- Shaft: 42 × 110 mm
11 kW Three-Phase Motor 1500 rpm – DRG-160M-4 Aluminium
- 11 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 160M
- Shaft: 42 × 110 mm
11 kW Compact Three-Phase Motor 1500 rpm – DRG-132M-4K Aluminium
- 11 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 132M
- Shaft: 38 × 80 mm
11 kW Three-Phase Motor 1000 rpm – DRG-160L-6 Aluminium
- 11 kW · 1000 rpm (6 poles)
- Aluminium frame · IEC 160L
- Shaft: 42 × 110 mm
11 kW Three-Phase Motor 3000 rpm – DRG-160M1-2 Cast Iron
- 11 kW · 3000 rpm (2 poles)
- Cast iron frame · IEC 160M
- Shaft: 42 × 110 mm
11 kW Three-Phase Motor 1500 rpm – DRG-160M-4 Cast Iron
- 11 kW · 1500 rpm (4 poles)
- Cast iron frame · IEC 160M
- Shaft: 42 × 110 mm
















