
Pump Motors
DRG Pump Motors DRG pump motors are designed for water supply, pressurisation, fire safety and industrial processes, built to low vibration, minimum noise and high energy efficien... More Details

DRG Pump Motors DRG pump motors are designed for water supply, pressurisation, fire safety and industrial processes, built to low vibration, minimum noise and high energy efficien... More Details

The feed belt of a packaging machine, a workshop fan, a small dosing pump or a mixer… Motors between 0.25 and 4 kW are the most numerous items in a factory, yet the least considere... More Details

In centrifugal pump systems, most of the efficiency and durability depends on choosing the right motor to drive the pump. A wrong kW rating, mismatched speed, or an unsuitable prot... More Details

Most of the decisions made before a pump system reaches the field are, in reality, budget decisions. While the installation team debates which power rating to choose, the purchasin... More Details

A greenhouse operator called us to replace the burned-out motor of a centrifugal pump that delivers water from a well to a storage tank. All they knew was the motor power: 11 kW. W... More Details

Short answer: in the 10 HP (7.5 kW), 3000 rpm class DRG's model is the DRG-132S2-2. This 2-pole motor in a 132S frame runs at 2930 rpm at full load, draws 13.7 A at 400 V and produ... More Details

Two-pole three-phase motors of 1.5 kW and above are sold on the market as "2900 rpm", and in DRG data their plate speeds live up to the name: 2895 at 1.5–3 kW, 2905 at 4 kW, 2930 a... More Details

The pump motor of an industrial parts washing machine is usually a 2-pole (3000 rpm class), IP55 three-phase motor, and its power follows from the pump's flow and pressure using P ... More Details

In sludge dewatering, motor selection splits into three separate questions depending on the machine: the main motor of a decanter centrifuge has to bring a heavy bowl up to high sp... More Details

A centrifugal pump motor is a standard three-phase induction motor that turns the pump impeller; the impeller gives the water velocity and the volute casing converts that velocity ... More Details

When choosing the mixer motor of a bentonite preparation unit, the value to look at is not the tank volume but the density of the slurry the unit pumps. Freshly mixed bentonite sta... More Details

Most coolant pumps on machine tools are immersion pumps: motor and pump share one body, the impeller sits on an extension of the motor shaft, and the body hangs into the tank to a ... More Details