A 7.5 kW three-phase electric motor — about 10 HP — is one of the most requested ratings in the mid-to-upper power class. It runs on a 380 V three-phase supply, is wired 400/690 V (Δ/Y) and, depending on speed, draws roughly 13.7 to 15.4 A on a 400 V line. Below you will find the current, speed, shaft and frame figures of this power, model by model with DRG.

7.5 kW 380 volt three-phase DRG electric motor, grey-bodied asynchronous motor

DRG Motor is a manufacturer, supplier and seller of electric motors. It is based in İzmir and ships quickly across all of Türkiye, that province included. Compare 7.5 kW models by speed and frame in the online electric motor shop, and see the same products together in the three-phase asynchronous electric motors category.

How many HP is 7.5 kW?

Short answer: about 10 HP. The conversion is simple — 1 HP equals 0.746 kW, so 7.5 ÷ 0.746 gives 10.05, which is why the trade calls this motor "10 horsepower". The kW here is the mechanical power the electric motor delivers at the shaft, not the power it draws from the grid. If your machine is marked in HP and the DRG catalogue in kW, do not worry — both describe the same motor.

Is 380 V the same as 400 V?

On site everyone says "380 volts", yet the Turkish low-voltage grid is nominally 400 V today. 380 V is the old rated value; in practice it describes the same three-phase line, and a 7.5 kW electric motor runs on it without trouble. DRG's 7.5 kW models are marked 400/690 V (Δ/Y): delta (Δ) on a 400 V line, star (Y) on a 690 V line.

This dual voltage also allows star-delta starting at ratings like 7.5 kW, often preferred in panels that need to cut the starting current. Before changing any connection, switch off the supply, verify it is de-energised and leave the work to a qualified electrician.

Speed and poles: 3000, 1500, 1000 rpm

The 7.5 kW rating is built in three speeds, and which one you choose depends entirely on the driven machine. On a 50 Hz supply the synchronous speed is 120·f/poles: 2 poles give 3000, 4 poles 1500, 6 poles 1000 rpm. An asynchronous electric motor turns slightly below this; the small gap is called slip.

The 2-pole (3000 rpm) model suits high-speed compressors and some pumps; the 4-pole (1500 rpm) model is the most common choice for conveyors, fans and general drive; the 6-pole (1000 rpm) model is preferred where high torque is needed, such as mixers and crushers. The same power moves to a larger frame at lower speed.

Click to see current electric motor prices and order nowSEE PRICES →

400 V current of a 7.5 kW electric motor

Current is the first figure to check for cable size and thermal relay range. On 7.5 kW DRG models the 400 V rated current is 13.7–15.4 A depending on speed; lower speed means slightly higher current. Set the exact thermal value according to the motor plate and panel documentation. For a quick check, the motor current chart and the motor cable size calculator help.

Model (7.5 kW)SpeedCurrent (400 V)Shaft
DRG-132S2-2-AL3000 rpm (2 poles)13.7 A38x80 mm
DRG-132M-4-AL1500 rpm (4 poles)14.3 A38x80 mm
DRG-160M-6-AL1000 rpm (6 poles)15.4 A42x110 mm

Shaft size and IEC frame

The shaft is the dimension that actually couples the motor to the machine. On the 2- and 4-pole 7.5 kW DRG models the shaft is 38x80 mm (diameter × length), with IEC frame 132M. On the 6-pole model the power moves to a larger frame, so the shaft is 42x110 mm and the frame 160M. The 132 or 160 in the model code is the shaft centre height above the feet in millimetres; align couplings and pulleys to it. If you are building a belt drive, the calculation tools on the site make it easier.

Where is a 7.5 kW electric motor used?

This power covers a wide band — above the small workshop, below heavy industry. The places we meet most: screw and piston compressors, medium centrifugal pumps, extractors and fans, belt conveyors, hydraulic power units, feed and mill machines. Speed is decisive here; the same 7.5 kW fits one machine at 3000 rpm and a completely different one at 1000 rpm.

Aluminium or cast iron?

DRG offers the 7.5 kW models in both aluminium and cast iron. The aluminium frame is light, easy to carry and mount, an advantage where the motor moves often or sits up high. The cast iron frame is heavier and more impact-resistant, preferred in vibrating or harsh environments. Both carry the same electrical values; for example the 1500 rpm model is the same 7.5 kW and 14.3 A in its aluminium and cast iron versions. The choice follows your environment and mounting.

Frequently asked questions

Does a 7.5 kW motor run on 380 V or 400 V?

Both describe the same line. The Turkish grid is nominally 400 V; 380 V is the old rated value. A 400/690 V marked 7.5 kW DRG electric motor runs on it wired in delta (Δ).

Which speed is right for 7.5 kW?

It depends on the machine. 3000 rpm for high-speed compressors, 1500 rpm for general drive, 1000 rpm where high torque is needed. If unsure, tell us the driven machine and we will confirm it together.

What is the current of a 7.5 kW motor?

At 400 V the rated current is roughly 13.7–15.4 A depending on speed. Size the cable and thermal relay to this value and to the motor plate.

Are 7.5 kW and 10 HP different motors?

No, it is the same motor. 7.5 kW is about 10 HP; one states the power in kW, the other in horsepower.

To see the current price of the 7.5 kW electric motor that fits your need, visit the shop.SEE PRICES

Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp

Electric Motors Related to This Topic — Models and Current Prices

Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.

ALL MODELS AND DETAILS IN THE ONLINE SHOP →