A 3 kW three-phase asynchronous electric motor is a 4 HP drive unit that runs on the 400 V grid most people still call 380 V. DRG offers this power at 3000, 1500 and 1000 rpm; rated current on the 400 V side ranges from about 5.71 to 6.84 A, and the 230/400 V (Δ/Y) winding on the plate means it connects in star.

Grey 3 kW 380 Volt DRG three-phase asynchronous electric motor with shaft and terminal box visible

DRG Motor is a manufacturer, supplier and seller of electric motors. It is based in İzmir and ships quickly across all of Türkiye, that province included. Once you fix the speed and frame, pick the right 3 kW model in the online electric motor shop and see every power together in the three-phase asynchronous electric motors category.

How many HP is 3 kW, and where does it fit?

Since 1 HP is about 0.746 kW, 3 kW lands squarely on 4 HP and is usually ordered as "4 horsepower". Its home is clear: small booster and surface pumps, lathe and milling machines in the workshop, feed crushers and small hammer mills, conveyor and auger drives, medium fans and compressors. When 2.2 kW is not enough but 4 kW is too much, 3 kW is the step in between.

The real question on the ground is speed, not power. A customer asking for "4 HP" often has a machine that wants 1500 rpm, while booster duty points to 2900 rpm and mills and mixers to 1000 rpm. Matching the power is easy; ordering the wrong speed is the costly mistake.

One power, three speeds: 2, 4 and 6 poles

The speed of an asynchronous electric motor is set by the pole count. On a 50 Hz grid the synchronous speed follows 120·f/poles: 2 poles ≈ 3000, 4 poles ≈ 1500, 6 poles ≈ 1000 rpm. The plate value is slightly lower; the difference is slip and is normal for an asynchronous motor. All three are made in 3 kW, so you buy the same power at the speed your machine needs.

PolesSpeedCurrent (400 V)Typical use
2 poles3000 rpm5.71 ABooster pump, surface pump, fan
4 poles1500 rpm6.02 AWorkshop machine, conveyor
6 poles1000 rpm6.84 AFeed crusher, mixer

380 V or 400 V? The 230/400 V on the plate

Both terms mean the same grid. Out of habit people say 380 V; the current standard value is 400 V, and the plate today reads 230/400 V. The first number is delta (Δ), the second is star (Y). Because 3 kW and lower carry this plate, the motor connects in star on your 400 V three-phase line.

Click to see current electric motor prices and order nowSEE PRICES →

3 kW current (400 V) and cabling

Current is the first figure you check to size the cable and set the thermal overload. At 3 kW on the 400 V side the rated current is about 5.71 A at 2 poles, 6.02 A at 4 poles and 6.84 A at 6 poles. The lower-speed (6-pole) model delivers the same power at a lower power factor, so it draws a little more; that is why the 1000 rpm 3 kW shows more amps than the 3000 rpm one.

Set the exact thermal value and cable size from the motor plate and the panel document; for a rough check the motor current chart and motor cable size calculator help. Remember that the inrush at start can be several times the rated current.

Star connection and safety

A 3 kW motor plated 230/400 V runs on a 400 V line with the terminal links set to star (Y). Direct-on-line starting is common at this power; star-delta starting comes up mainly at higher ratings. Before changing anything, switch off the supply, verify it is dead and have a qualified electrician do the work. A wrong link means the motor either will not turn or the winding is overstressed.

Frame and shaft: 90L, 100L, 132S

At 3 kW you meet three IEC frames in the DRG range. The 2- and 4-pole standard models come in a 100L frame with a 28x60 mm shaft; the 6-pole model uses the larger 132S frame with a 38x80 mm shaft, because delivering the same power at low speed needs a bigger body. On the cast-iron side there is also a compact 90L 2-pole option with a 24x50 mm shaft that fits tighter spaces.

The number in the code (90, 100, 132) is the frame size, the shaft centre height above the feet in millimetres. That dimension is critical for coupling and pulley alignment; the electric motor calculator helps on the drive side.

Aluminium or cast iron?

Both give the same power and speed; the difference is the frame material and where it is used. Aluminium is light, easy to carry and mount, and is preferred in clean workshops and machine tools. Cast iron is heavier and more impact-resistant, earning its place on mills, pumps and farm machinery where vibration, dust and rough handling are the rule. At 3 kW both frames offer 2, 4 and 6 poles.

3 kW DRG models and values

Below are the 3 kW DRG models with speed, frame and 400 V current. Each code links straight to its product page; to firm up the choice see the electric motor calculator and the online electric motor shop.

ModelSpeed / PolesFrame / ShaftCurrent (400 V)
DRG-100L-2-AL3000 rpm / 2100L aluminium / 28x605.71 A
DRG-100L2-4-AL1500 rpm / 4100L aluminium / 28x606.02 A
DRG-132S-6-AL1000 rpm / 6132S aluminium / 38x806.84 A
DRG-90L-2K-GG3000 rpm / 290L cast iron / 24x505.71 A
DRG-100L2-4-GG1500 rpm / 4100L cast iron / 28x606.02 A

Frequently asked questions

How many HP is 3 kW?

Exactly 4 HP. Since 1 HP ≈ 0.746 kW, 3 kW ≈ 4.02 horsepower, so it is ordered as 4 HP.

Which speed should I choose for 3 kW?

Go by the speed the machine needs. Boosters and fans usually want 3000 rpm, workshop machines and conveyors 1500 rpm, feed crushers and mixers 1000 rpm. If unsure, check the machine plate or the speed of the old motor you removed.

Why does the current at 400 V change with speed?

The lower-speed (6-pole) model delivers the same power at a lower power factor, so it draws a little more current. That is why the 1000 rpm 3 kW draws more than the 3000 rpm one.

Should I write 380 V or 400 V?

Both refer to the same grid. The older term is 380 V; the current standard value is 400 V. The plate shows 230/400 V and the motor connects in star on a 400 V line.

See the current price of the 3 kW three-phase electric motor that fits your speed and frame in the shop.SEE PRICES

Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp

Electric Motors Related to This Topic — Models and Current Prices

Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.

ALL MODELS AND DETAILS IN THE ONLINE SHOP →