A 5.5 kW three-phase asynchronous electric motor is a roughly 7.5 HP machine running on a 380–400 V supply. Its rated current at 400 V ranges from about 10 A to 12 A depending on speed, and it is wired in star (Y) or delta (Δ) according to the voltage. This article explains the current, speed options and connection logic of the 5.5 kW electric motor using DRG’s real model data.
DRG Motor is a manufacturer, supplier and seller of electric motors. It is based in İzmir and ships quickly across all of Türkiye, that province included. You can browse the 5.5 kW range by speed and frame in the online electric motor shop and see the same products together in the three-phase asynchronous electric motors category.
Where is a 5.5 kW electric motor used?
This power band does a lot of work. Compressors, grain and feed mills, large exhaust and radial fans, medium pumps, conveyors and mixers often call for a 5.5 kW electric motor. It is the practical middle class between a small workshop and a heavy plant. The first question is always the same: what running speed do you need? Because the same 5.5 kW turns at a completely different speed depending on how it is wound.
Speed options: 2, 4 and 6 poles
On a 50 Hz supply the synchronous speed comes from 120·f/poles: roughly 3000 at 2 poles, 1500 at 4 poles, 1000 d/d at 6 poles; the asynchronous electric motor runs slightly below these because of slip. You can get the same 5.5 kW at three speeds, each with its own 400 V current:
| Model | Speed | Poles | Current (400 V) |
|---|---|---|---|
| DRG-132S1-2-AL | 3000 rpm | 2 | 10.1 A |
| DRG-132S-4-AL | 1500 rpm | 4 | 10.7 A |
| DRG-132M2-6-AL | 1000 rpm | 6 | 12.0 A |
The difference looks small but matters: as speed drops, the current for the same power rises a little, because a low-speed winding produces more torque. The 1000 rpm model draws a higher 400 V current than the 3000 rpm one.
Click to see current electric motor prices and order nowSEE PRICES →
Current and connection at 380 V
What we call “380 Volt” in Türkiye is, by today’s standard, a 400 V line-to-line supply; the plate usually reads 400 V. On 5.5 kW DRG electric motors the voltage is shown as 400/690 V (Δ/Y). The first value is delta, the second star.
The practical outcome: on your 400 V supply this electric motor runs in delta (Δ). On 690 V systems it is wired in star (Y). 5.5 kW is where star-delta starting starts to make sense; panels that start in star and switch to delta to limit inrush are common in this class. Read the model plate for the exact current; for a quick check the motor current chart and the cable size calculator help. Before wiring, cut the power, verify it is de-energised and let a qualified electrician do the work.
Torque: same power, different character
Power stays fixed but torque changes with speed. Using T = 9550·P/n, the rated torque is roughly 18 Nm at 2 poles (≈2900 rpm), about 36 Nm at 4 poles (≈1455 rpm) and around 54 Nm at 6 poles (≈960 rpm). So 2 poles suit high-speed fans and compressors, 4 poles a balanced drive, 6 poles slow high-torque work. The most suitable speed depends on what your machine asks for.
Frame, shaft and housing material
5.5 kW DRG models come in IEC frame sizes. Standard 2- and 4-pole models are 132S, the 6-pole is 132M; there is also a compact option that fits the same power into a smaller 112M frame. The number in the frame code gives the shaft centre height above the base (mm), which you use to align coupling and pulley.
| Model | IEC Frame | Shaft (D×E) | Housing |
|---|---|---|---|
| DRG-132S-4-AL | 132S | 38x80 mm | Aluminium |
| DRG-112M-4K-AL | 112M | 28x60 mm | Aluminium |
| DRG-132M2-6-AL | 132M | 38x80 mm | Aluminium |
| DRG-132S-4-GG | 132S | 38x80 mm | Cast iron |
The housing is a choice too: aluminium is light and easy to handle and mount; cast iron is heavier and more vibration-resistant, preferred in tough industrial settings. You can get 5.5 kW in both. DRG electric motors are IP55 with class F insulation as standard.
Choosing the right 5.5 kW electric motor
It comes down to three questions: what speed, which housing material, which mounting size. Your machine sets the speed, your environment the material, your existing setup the shaft and frame. The models below link straight to the product page; for a wider comparison see the electric motor calculator and the shop.
| Model | Speed | Current (400 V) | Housing |
|---|---|---|---|
| DRG-132S1-2-AL | 3000 rpm | 10.1 A | Aluminium |
| DRG-132S-4-AL | 1500 rpm | 10.7 A | Aluminium |
| DRG-132M2-6-AL | 1000 rpm | 12.0 A | Aluminium |
| DRG-132S1-2-GG | 3000 rpm | 10.1 A | Cast iron |
| DRG-132S-4-GG | 1500 rpm | 10.7 A | Cast iron |
Frequently asked questions
How many amps does a 5.5 kW electric motor draw at 380 V?
On a 400 V supply the rated current depends on speed: about 10.1 A at 3000 rpm, 10.7 A at 1500 rpm and 12.0 A at 1000 rpm. Inrush is several times higher; size the overload and cable from the plate value.
How many HP is 5.5 kW?
About 7.5 HP (1 HP ≈ 0.746 kW). In catalogues and machine matching, 5.5 kW and 7.5 HP describe the same class.
Should I wire it in star or delta?
A 5.5 kW electric motor marked 400/690 V runs in delta (Δ) on a 400 V supply, and in star (Y) on a 690 V system. A star-delta starter may also be used to ease starting.
Aluminium or cast iron?
Choose aluminium for light weight and easy mounting, cast iron for heavy industry and high vibration. Both are available at 5.5 kW; if unsure, tell us your application.
To see the current price of a 5.5 kW electric motor by speed and housing, visit the shop.SEE PRICES
Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp
Electric Motors Related to This Topic — Models and Current Prices
Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.
5.5 kW Three-Phase Motor 3000 rpm – DRG-132S1-2 Aluminium
- 5.5 kW · 3000 rpm (2 poles)
- Aluminium frame · IEC 132S
- Shaft: 38 × 80 mm
5.5 kW Three-Phase Motor 1500 rpm – DRG-132S-4 Aluminium
- 5.5 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 132S
- Shaft: 38 × 80 mm
5.5 kW Compact Three-Phase Motor 1500 rpm – DRG-112M-4K Aluminium
- 5.5 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 112M
- Shaft: 28 × 60 mm
5.5 kW Three-Phase Motor 1000 rpm – DRG-132M2-6 Aluminium
- 5.5 kW · 1000 rpm (6 poles)
- Aluminium frame · IEC 132M
- Shaft: 38 × 80 mm
5.5 kW Three-Phase Motor 3000 rpm – DRG-132S1-2 Cast Iron
- 5.5 kW · 3000 rpm (2 poles)
- Cast iron frame · IEC 132S
- Shaft: 38 × 80 mm
5.5 kW Three-Phase Motor 1500 rpm – DRG-132S-4 Cast Iron
- 5.5 kW · 1500 rpm (4 poles)
- Cast iron frame · IEC 132S
- Shaft: 38 × 80 mm
















