A 2.2 kW three-phase electric motor is roughly a 3 HP machine and runs on Türkiye's 380/400 V three-phase grid. The same power is offered at three speeds, from 2 up to 6 poles; the rated current at 400 V sits roughly between 4.35 and 5.09 A, and the 230/400 V (Δ/Y) winding is connected in star on a 400 V line.

Grey 2.2 kW 380 Volt DRG three-phase asynchronous electric motor with shaft and terminal box visible

DRG Motor is a manufacturer, supplier and seller of electric motors. It is based in İzmir and ships quickly across all of Türkiye, that province included. Once you have settled on the speed and the frame material, pick the right 2.2 kW model in the online electric motor shop, or see the whole range together in the three-phase asynchronous electric motors category.

Where a 2.2 kW motor earns its keep

This is one of the most requested ratings in workshops and on farms. Mid-size booster pumps, small feed and hammer mills, lathes and milling machines, compressors, conveyors and auger drives all turn around 2.2 kW. On the ground the real question is rarely the power but the speed: the customer who asks for "3 horsepower" often has a machine that wants 1500 rpm, while some booster and centrifugal jobs want 2900 rpm and mills or mixers prefer 1000 rpm.

Three speeds, one power: 2/4/6 poles

In an asynchronous electric motor the pole count sets the speed. At 50 Hz the synchronous speed comes from 120·f/poles: 2 poles ≈ 3000, 4 poles ≈ 1500, 6 poles ≈ 1000 rpm. The figure on the plate is slightly lower; that gap is slip and it is normal. The same 2.2 kW moves to a larger frame as the speed drops:

PolesSpeedFrame (IEC)Shaft (dia×len)
2 poles3000 rpm90L24x50 mm
4 poles1500 rpm100L28x60 mm
6 poles1000 rpm112M28x60 mm

The practical upshot: a 1000 rpm 2.2 kW is noticeably larger and heavier than a 3000 rpm one, because delivering the same power at a lower speed means producing more torque. Plan your space and coupling around the frame size; the foot holes and shaft dimension change between a 90L and a 112M.

Click to see current electric motor prices and order nowSEE PRICES →

How many amps at 380/400 V?

You size the cable and set the overload relay range from this value. The rated current rises slightly as speed drops, because the lower-speed model has a slightly lower power factor. The figures below come from DRG's actual 2.2 kW aluminium records (the cast-iron versions draw the same current):

ModelSpeedCurrent (400 V)Approx. torque
DRG-90L-2-AL3000 rpm4.35 A≈ 7 Nm
DRG-100L1-4-AL1500 rpm4.52 A≈ 14 Nm
DRG-112M-6-AL1000 rpm5.09 A≈ 21 Nm

Torque is estimated with T = 9550·P/n; it shows how the turning force at the shaft grows as the speed falls. For the right cable and protection you can use the motor current chart and the cable size calculator.

230/400 V connection and star-delta

DRG's 2.2 kW electric motors are wound for 230/400 V (Δ/Y). The two numbers describe two wiring modes: 230 V delta (Δ), 400 V star (Y). On Türkiye's 400 V three-phase grid this motor runs with its terminal links set to star. Since 2.2 kW is a small rating, direct-on-line starting is enough in most panels; star-delta starting matters more at higher ratings and for loads that start under load. Before changing any connection, switch off the supply, verify it is dead and have a qualified electrician do the work; set the link layout according to the motor nameplate and the panel documentation.

Aluminium or cast iron?

Both frames exist in the 2.2 kW range, and the technical values (speed, current, shaft, frame size) are identical; the difference is weight and environment. The aluminium frame is light and suits machines that are moved, dismantled often or sit in a lighter workshop. The cast-iron frame is heavier and tougher against knocks, preferred on vibrating, dusty, demanding industrial lines. You can match either one by power and speed:

For 3000 rpm see cast-iron DRG-90L-2, for 1500 rpm cast-iron DRG-100L1-4, and for 1000 rpm cast-iron DRG-112M-6; the aluminium counterparts open from the table above.

What to confirm when ordering

Even when 2.2 kW is the right power, the wrong speed or mounting type will not fit your machine. Lock down three points when you order: the speed (2/4/6 poles), foot or flange (B3 / B5 / B14 / B35) and frame material (aluminium / cast iron). If you are replacing an existing electric motor, the safest route is to photograph its nameplate and send it: power, speed, voltage and frame size are already printed there. Choose the model in the online shop and ask us wherever you are unsure.

Frequently asked questions

How many horsepower is 2.2 kW?

About 3 HP. Since 1 HP ≈ 0.746 kW, 2.2 kW ≈ 2.95 HP, so it is commonly called 3 horsepower.

Which speed should I choose for 2.2 kW?

Match the speed the machine needs. Booster pumps and some centrifugals want 3000 rpm, most general drives and machine tools want 1500 rpm, mills and mixers want 1000 rpm. If unsure, go by the machine's plate or the speed of the existing motor.

Why does the current at 400 V change with speed?

The lower-speed (6-pole) model delivers the same power at a lower power factor, so it draws a little more current. That is why the 1000 rpm 2.2 kW draws more than the 3000 rpm one.

Should I write 380 V or 400 V?

Both refer to the same grid. The older term is 380 V; the current standard value is 400 V. The plate shows 230/400 V and the motor connects in star on a 400 V line.

See the current price of the 2.2 kW three-phase electric motor that fits your need in the shop.SEE PRICES

Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp

Electric Motors Related to This Topic — Models and Current Prices

Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.

ALL MODELS AND DETAILS IN THE ONLINE SHOP →