A 380 volt three-phase electric motor is an asynchronous machine connected to a three-phase AC supply, with three windings set 120 degrees apart. What industry calls "380 volt" is, in today's notation, the 400 volt line-to-line voltage; you will see both figures on nameplates in the field. Unlike small single-phase appliances fed from a socket, this motor is supplied through three live conductors from the panel and draws its rotating field straight from the grid.
There are really two questions here: what 380 V means, and which machines this voltage suits. We cover both with real figures below, and point you to the right DRG electric motor models and the three-phase asynchronous electric motors category.
What does 380 V three-phase actually mean?
A three-phase grid carries two voltages at once. Measure between any two phases and you read about 400 V (the older "380 V"); measure between a phase and neutral and you get 230 V. So single-phase 230 V and three-phase 400 V are two readings of the same supply. A three-phase motor's windings are designed around that phase-to-phase voltage.
DRG nameplates usually show the voltage as 400/690 V (Δ/Y). The first value is for delta (Δ), the second for star (Y). On a 400 V supply the motor runs in delta; on a 690 V line the same motor is wired in star. This dual rating is also what makes star-delta starting possible, as we explain below.
Why does industry use 380 V instead of 230 V?
The short answer is efficiency and economy, but let us make it concrete. The current needed to carry a given power falls as voltage rises. In a three-phase system, power equals root three times voltage times current times power factor. At 400 V you do the same job with less current, which means thinner cable, smaller fuses and less heat.
The second reason is the rotating field. Three phases create a magnetic field that turns on its own inside the motor. Single-phase motors need an auxiliary winding, a capacitor or similar extras to start turning; three-phase machines do not. That makes them sturdier, lower in maintenance and comfortable at high power. Above roughly 4 kW, single-phase stops being a practical option.
380 V three-phase versus 230 V single-phase
The most common field question is "my socket is 220, will this motor run?" Short answer: a three-phase motor cannot be fed from a single-phase socket. The core differences:
| Feature | 230 V single-phase | 400 V three-phase |
|---|---|---|
| Supply | 1 phase + neutral | 3 phases |
| Rotating field | Needs extras | Inherent |
| Practical power range | Low power | Small to large |
| Current at same power | Higher | Lower |
The DRG range is entirely three-phase. If you have a single-phase need, bringing three phases to the panel and moving to a three-phase motor is usually the sounder route; you can see which power draws which current in the motor current chart.
Click to see current electric motor prices and order nowSEE PRICES →
Where is a 380 V three-phase motor used?
In short: wherever the work gets serious. A few typical examples:
- Pumps: irrigation, circulation and pressure-boosting lines. Centrifugal pumps usually favour 1500 or 3000 rpm.
- Fans and extractors: ventilation, dust collection, drying. Here 1000 or 1500 rpm is common.
- Compressors: air compressors need high starting torque; a cast iron frame helps.
- Conveyors and belts: handling lines, filling plants, packaging machines.
- Machine tools and mills: saws, millers, crushers and mixers under steady load.
What these machines share is the need for smooth, strong torque. That is exactly where the 380 V three-phase motor belongs.
DRG 380 V (400 V) three-phase models
The table below is a slice of DRG's 1500 rpm four-pole aluminium models. All are wound for 400/690 V (Δ/Y), so they run in delta on a 400 V supply. Currents are for 400 V.
| Model | Power | Speed | Line current (400 V) |
|---|---|---|---|
| DRG-112M-4-AL | 4 kW (5.5 HP) | 1500 rpm | 7.95 A |
| DRG-132S-4-AL | 5.5 kW (7.5 HP) | 1500 rpm | 10.7 A |
| DRG-112M-4K-AL | 5.5 kW (7.5 HP) | 1500 rpm | 10.7 A |
| DRG-132M-4-AL | 7.5 kW (10 HP) | 1500 rpm | 14.3 A |
| DRG-160M-4-AL | 11 kW (15 HP) | 1500 rpm | 20.4 A |
| DRG-132M-4K-AL | 11 kW (15 HP) | 1500 rpm | 20.4 A |
For higher or lower power, 1000/3000 rpm options and cast iron equivalents, filter the online motor shop by power and speed. Aluminium is light for portable jobs, while cast iron suits heavy, vibrating duty.
Why star-delta starting matters
At the instant of switch-on, a three-phase motor draws a starting current several times its rated value. At low power this is no issue; but as power grows, that inrush strains the supply and can trip the fuse. Star-delta first connects the motor in star to start on a lower current, then switches to delta once it picks up speed. The 400/690 V dual rating of DRG motors is exactly suited to this method on a 400 V supply.
Wiring, panel work and starting settings must be done by qualified electrical personnel. Before starting, isolate the supply and verify it is dead. To fix power and speed in advance, use the electric motor calculator.
Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp
Frequently asked questions
Are 380 V and 400 V the same motor?
Yes. In Turkey people habitually say 380 V, while the current standard line-to-line grid voltage is 400 V. Motors marked 380 or 400 run on the same supply.
Can I run a three-phase motor from a home socket?
No. A single-phase socket does not provide three phases. A three-phase motor needs three phases brought to the panel; plan this with a qualified electrician.
Which power should I choose?
The power and speed demanded by your driven machine decide it. If you already have a motor, the most practical route is to send us the nameplate values and settle the right DRG model together.
Which regions does DRG reach?
DRG Motor is based in İzmir and ships quickly across all of Türkiye. Clarifying power, speed and frame type before ordering speeds up delivery.
To choose the 380 V three-phase electric motor that best fits your need, review current models and pricing in the online shop. DRG Motor, as a manufacturer, supplier and seller of electric motors, serves all of Türkiye from its İzmir base.
Click to see the current price of the 380 V three-phase electric motor that suits youSEE PRICES
Electric Motors Related to This Topic — Models and Current Prices
Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.
4 kW Three-Phase Motor 1500 rpm – DRG-112M-4 Aluminium
- 4 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 112M
- Shaft: 28 × 60 mm
5.5 kW Three-Phase Motor 1500 rpm – DRG-132S-4 Aluminium
- 5.5 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 132S
- Shaft: 38 × 80 mm
5.5 kW Compact Three-Phase Motor 1500 rpm – DRG-112M-4K Aluminium
- 5.5 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 112M
- Shaft: 28 × 60 mm
7.5 kW Three-Phase Motor 1500 rpm – DRG-132M-4 Aluminium
- 7.5 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 132M
- Shaft: 38 × 80 mm
11 kW Three-Phase Motor 1500 rpm – DRG-160M-4 Aluminium
- 11 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 160M
- Shaft: 42 × 110 mm
11 kW Compact Three-Phase Motor 1500 rpm – DRG-132M-4K Aluminium
- 11 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 132M
- Shaft: 38 × 80 mm
















