A 0.75 kW three-phase electric motor runs on a 380–400 V supply with a 230/400 V (Δ/Y) nameplate; at 400 V its rated current sits between 1.64 and 1.93 A depending on the number of poles, with speed options of 3000, 1500 or 1000 rpm. Below we go through which speed, which frame and which connection to pick.
DRG Motor is a manufacturer, supplier and seller of electric motors. Based in İzmir, it ships quickly across all of Türkiye. You can pick a model of this rating by speed in the online electric motor shop and see the same products together in the three-phase asynchronous electric motors category.
380 V or 400 V? Why the plate shows two values
This is where most people hesitate. Someone asking for a "380 volt" unit and someone asking for "400 V" mean the same grid. In Türkiye the line-to-line voltage of the three-phase supply was long called 380 V; the current nominal value is 400 V. In practice they are the same network. The 230/400 V you read on the plate is about the connection instead: 230 V is the delta (Δ) winding, 400 V is the star (Y) winding. So this 0.75 kW electric motor runs in star (Y) on your 380–400 V supply.
Why is 0.75 kW asked for so often?
0.75 kW (about 1 HP) is one of the most common values in the small-power class. Small conveyors and belts, water and circulation pumps, fans and extractors, grinding benches, mixers, small compressors and dosing units all turn at this rating. In short, wherever a machine needs an auxiliary drive rather than a main one, this band comes up most. That is why it is kept in both aluminium and cast-iron frames, in three different speeds.
Speed options: 2, 4 and 6 poles
The same 0.75 kW can be delivered at different speeds. The number of poles sets the speed; on a 50 Hz grid the synchronous speed follows 120·f/poles. A lower speed means more torque at the same power. Choose by the speed your machine needs, not by the pole count itself.
| Poles | Speed | Rated current (400 V) | Frame (IEC) |
|---|---|---|---|
| 2-pole | 3000 rpm | 1.64 A | 80 |
| 4-pole | 1500 rpm | 1.75 A | 80 |
| 6-pole | 1000 rpm | 1.93 A | 90S |
The real speed on the plate is slightly below these figures (for example around 1440 instead of 1500); that difference is slip and is normal in an asynchronous electric motor.
Click to see current electric motor prices and order nowSEE PRICES →
How much is the rated current? (400 V)
At 400 V the rated current of the 0.75 kW model is in the 1.64–1.93 A band by speed. The low-speed (6-pole) model draws a little more than the high-speed one, due to the difference in power factor and torque. This figure is the first number to check when sizing cable and setting the thermal relay range. Remember that the starting current can reach several times the rated value. For a quick check use the motor current chart and cable size calculator; make the final setting per the motor nameplate and panel documentation.
230/400 V connection: star or delta?
The six terminals in the box can be bridged two ways. To run this 230/400 V electric motor on a 400 V supply you connect it in star (Y); a 230 V three-phase line (rare) would need delta (Δ). Since 0.75 kW is a small rating it is usually started direct-on-line; star-delta starting mostly matters at larger ratings. Before changing the connection, isolate the supply, verify it is de-energised and have the work done by qualified electrical personnel. To reverse the direction, swap any two of the three phases.
Aluminium or cast iron?
At this rating both frames are offered. The aluminium-frame model is light and easy to carry and mount; it suits most pumps, fans and light benches. The cast-iron (GG) frame model is heavier and more impact-resistant, preferred in industrial settings with high vibration and mechanical stress. The electrical values (current, speed, voltage) are identical on both frames; the difference is strength and weight.
0.75 kW DRG models
The table below lists the DRG models at this rating with speed and 400 V current. Each code links straight to its product page; for a wider choice use the electric motor calculator and the online electric motor shop.
| Model | Speed | Current (400 V) | Shaft (D×L) |
|---|---|---|---|
| DRG-801-2 (Aluminium) | 3000 rpm | 1.64 A | 19x40 mm |
| DRG-802-4 (Aluminium) | 1500 rpm | 1.75 A | 19x40 mm |
| DRG-90S-6 (Aluminium) | 1000 rpm | 1.93 A | 24x50 mm |
| DRG-801-2 (Cast iron) | 3000 rpm | 1.64 A | 19x40 mm |
| DRG-802-4 (Cast iron) | 1500 rpm | 1.75 A | 19x40 mm |
| DRG-90S-6 (Cast iron) | 1000 rpm | 1.93 A | 24x50 mm |
Frequently asked questions
Is a 380 volt electric motor the same as 400 V?
Yes. In Türkiye the three-phase grid was rated 380 V in the past and 400 V today; in practice it is the same network. The 230/400 V on the plate describes the connection.
How many HP is 0.75 kW?
About 1 HP (1 HP ≈ 0.746 kW). Plates usually show both values together.
Which speed should I choose?
Look at the speed your machine needs. Pumps and fans often use 2 or 4 poles, while slower high-torque drives use 6 poles. If unsure, share the existing nameplate and we will confirm it together.
Is an aluminium frame weaker than cast iron?
Electrically both give the same values. Cast iron is heavier and more impact-resistant; aluminium is light and easy to mount. The choice depends on the environment and mounting preference.
See the current price of your 0.75 kW three-phase electric motor by speed option in the shop.SEE PRICES
Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp
Electric Motors Related to This Topic — Models and Current Prices
Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.
0.75 kW Three-Phase Motor 3000 rpm – DRG-801-2 Aluminium
- 0.75 kW · 3000 rpm (2 poles)
- Aluminium frame · IEC 80
- Shaft: 19 × 40 mm
0.75 kW Three-Phase Motor 1500 rpm – DRG-802-4 Aluminium
- 0.75 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 80
- Shaft: 19 × 40 mm
0.75 kW Three-Phase Motor 1000 rpm – DRG-90S-6 Aluminium
- 0.75 kW · 1000 rpm (6 poles)
- Aluminium frame · IEC 90S
- Shaft: 24 × 50 mm
0.75 kW Three-Phase Motor 3000 rpm – DRG-801-2 Cast Iron
- 0.75 kW · 3000 rpm (2 poles)
- Cast iron frame · IEC 80
- Shaft: 19 × 40 mm
0.75 kW Three-Phase Motor 1500 rpm – DRG-802-4 Cast Iron
- 0.75 kW · 1500 rpm (4 poles)
- Cast iron frame · IEC 80
- Shaft: 19 × 40 mm
0.75 kW Three-Phase Motor 1000 rpm – DRG-90S-6 Cast Iron
- 0.75 kW · 1000 rpm (6 poles)
- Cast iron frame · IEC 90S
- Shaft: 24 × 50 mm
















