The real secret of fast delivery is a simple one: keeping the right powers ready. When the most requested three-phase asynchronous electric motor ratings are prepared in advance, there is no production queue once the order lands; the product is dispatched without waiting. As a manufacturer, supplier and seller of electric motors, DRG Motor keeps these common ratings on hand and, from its İzmir base, delivers quickly across Türkiye, that city included.

Grey DRG three-phase asynchronous electric motor ready for fast delivery

You can review the electric motor that best fits your need by power and speed in the online electric motor shop, and see the ready models together in the three-phase asynchronous electric motors category.

Which powers are usually kept ready?

How fast an electric motor can leave depends directly on how often that rating is asked for. The small-to-medium band appears almost everywhere, from panel builders to machine makers, from pump and fan duties to conveyor lines. That is why the 1500 rpm class between 4 kW and 11 kW, in an aluminium housing, is the step most often kept ready. The table below sums up the ratings prepared for quick dispatch; each code links to its product page.

ModelPowerSpeedCurrent (400 V)
DRG-112M-4-AL4 kW (5.5 HP)1500 rpm7.95 A
DRG-132S-4-AL5.5 kW (7.5 HP)1500 rpm10.7 A
DRG-112M-4K-AL5.5 kW (7.5 HP)1500 rpm10.7 A
DRG-132M-4-AL7.5 kW (10 HP)1500 rpm14.3 A
DRG-160M-4-AL11 kW (15 HP)1500 rpm20.4 A
DRG-132M-4K-AL11 kW (15 HP)1500 rpm20.4 A

This range is no accident. 4, 5.5, 7.5 and 11 kW are among the most widely used ratings in industry, so keeping them ready makes the most sense here. Smaller ratings reach down to 0.25 kW in aluminium, and heavier jobs run up to 355 kW in cast iron. The range is wide, but the heart of fast dispatch is this much-requested middle band.

Click to see current electric motor prices and order nowSEE PRICES →

Why can these motors ship without waiting?

The underlying reason is standardisation. Three-phase asynchronous electric motors are built to IEC frame sizes; codes such as 112M, 132S, 132M and 160M fix the bolt pattern, shaft diameter and foot dimensions to a known standard. When a machine is designed to these sizes, a motor of the same power and speed drops straight into place. That standard structure, fitting one model to many applications, is exactly what makes keeping it ready sensible.

The second reason is shared voltage. Models in this band run on 400/690 V (Δ/Y); with wide grid compatibility, a single model serves very different plants. The third is the housing choice: aluminium eases handling and mounting with its light weight, while cast iron is preferred in tough conditions. Both housings are prepared in the same rating steps, so whichever you need can set off without waiting.

Same power, different speed: why poles matter

A frequent question is: "Why are there different models at the same kW?" The answer lies in speed. An electric motor's speed is set by the number of poles; 2 poles give about 3000 rpm, 4 poles 1500 rpm, 6 poles 1000 rpm. The same power is offered at different speeds because each application wants a different speed and torque. Below is 4 kW shown at three different speeds.

Speed / PolesModelPowerHousing
3000 rpm · 2-poleDRG-112M-2-AL4 kWaluminium
1500 rpm · 4-poleDRG-112M-4-AL4 kWaluminium
1000 rpm · 6-poleDRG-132M1-6-AL4 kWaluminium

In practice 1500 rpm turns most often, so the chance of it being ready is highest there. For high-speed duties such as pumps and fans, 3000 rpm comes forward; for low-speed drives such as mixers or heavy transmission, 1000 rpm does. Stating the speed alongside the power at order time lets us find the most suitable ready model fast.

What to clarify to speed up dispatch?

The pace of fast delivery is also set by correct information. Once you confirm the power (kW), speed (rpm), housing (aluminium/cast iron) and shaft diameter of the motor you have or need, the match among ready models is made at once. If you are replacing an old motor, the quickest route is to photograph the nameplate; its values point to the right model in seconds. If you hesitate on power and speed, the electric motor calculator points the way.

If a non-standard figure is on your mind, say 10 kW, heading for the nearest standard step makes it easier; that is 11 kW. As long as you stay on a standard step, both the match and the chance of dispatch without waiting improve.

Click to see current prices of electric motors ready for quick dispatchSEE PRICES

Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp

Frequently asked questions

Which powers are delivered faster?

The most requested 1500 rpm class between 4 and 11 kW is the band most likely to be ready. Smaller and larger ratings are in the range too; share the right power and speed and we will find the most suitable ready model quickly.

Which arrives sooner, aluminium or cast iron?

Both housings are prepared at the same rating steps. The choice follows weight, mounting and operating environment; whichever fits is dispatched without waiting.

I am outside İzmir, how long does it take?

DRG Motor is based in İzmir and delivers quickly by cargo across Türkiye, that city included. The exact time becomes clear with your location and cargo details; for a ready model the process is short.

What if my need is not a standard power?

We steer you to the nearest standard step. For 10 kW, for example, 11 kW suits. Staying on a standard power eases both the match and fast dispatch.

Electric Motors Related to This Topic — Models and Current Prices

Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.

ALL MODELS AND DETAILS IN THE ONLINE SHOP →