A 110 kW electric motor is a large-frame three-phase asynchronous machine with a cast-iron housing, sitting in the upper band of the power range DRG Motor offers as a manufacturer, supplier and seller. If your need is urgent: confirm the power, speed, connection and mounting, then send your request for fast delivery across Türkiye from our İzmir-based base.
DRG Motor is a manufacturer, supplier and seller of electric motors. You can review the 110 kW models with their speed options in the online electric motor shop and see the same series together in the three-phase asynchronous electric motors category. On urgent jobs, the biggest time loss comes from information missing at the start, so read the points below before you order.
Where 110 kW shows up
This power class is no longer a small workshop's job; it belongs to heavy industry. You will find 110 kW on large compressors, high-flow pump sets, crushers and mills, conveyor lines, air fans and plastic injection presses. The common thread: the load is heavy, the start is hard and downtime hits hard. When a line stops, the talk is in minutes, not hours, which is why sourcing a spare electric motor is part of the production plan, not a luxury.
Cast iron is chosen for exactly this reason. It absorbs vibration, spreads heat, and stands up to shock and continuous load better than aluminium. In the 110 kW class the DRG range starts with cast iron; a light housing is not on the table at this power.
Same power, different speed: pick the right one
A common point: saying "I want 110 kW" is not enough on its own, because the same power comes at different speeds. The number of poles sets the speed. You can see a rough torque figure yourself: torque is about T = 9550 × power(kW) / speed(rpm). So the lower the speed, the higher the torque; a crusher wants high torque, a fan wants high speed.
| Model | Speed | Poles | Approx. torque |
|---|---|---|---|
| DRG-315S-2 | 3000 rpm | 2 | ~350 Nm |
| DRG-315S-4 | 1500 rpm | 4 | ~700 Nm |
| DRG-315L1-6 | 1000 rpm | 6 | ~1050 Nm |
All three have a cast-iron housing, 400/690 V, and a nameplate current at 400 V of roughly 185–196 A. The shaft is 65x140 mm on the 2-pole and 85x170 mm on the 4- and 6-pole; note this figure when you pick a coupling or pulley. If you are unsure of the power-speed match, the electric motor calculator gives a first idea and we settle the rest together.
Click to see current electric motor prices and order nowSEE PRICES →
Starting: no longer up for debate at this power
Connecting a 110 kW electric motor straight to the mains draws several times the nameplate current at start-up. That punishes both the supply and the machine; in most plants the panel protection will not allow it anyway. In this class, starting with a soft starter or a frequency inverter is a practical necessity. If you want speed control, an inverter; if a soft start is enough, a soft starter.
Saying this up front speeds things up: the answer to "will you drive it from an inverter or direct?" also affects the voltage and connection (star/delta) choice. Always let qualified electrical staff make the panel-side connection; the terminal box is not opened before the power is cut and the de-energised state confirmed.
İzmir-based delivery and supply process
DRG Motor is based in İzmir and ships quickly across the whole of Türkiye, that city included. With a heavy electric motor like 110 kW, logistics is the unseen but most critical half of the order. A 315 frame reaches hundreds of kilos; it does not come off the truck without a forklift, crane or pallet jack. Having lifting gear and a suitable unloading area ready before the delivery day removes the hours of waiting at the door.
The process runs briefly like this: need details → choosing the right model → request/quote → dispatch → delivery on site. On urgent jobs a "decide today, on the road tomorrow" approach is possible; without giving a numeric day pledge, we plan the shortest dispatch for the state of the goods.
What to settle at the order stage
Most orders that go wrong come from one line left out on the phone. For 110 kW these six points are enough: power (110 kW), speed/poles, voltage and connection (400/690 V, Δ/Y), mounting type (foot B3, flange B5 or B35), shaft diameter and terminal-box orientation. The most practical route is to photograph the nameplate of your current electric motor and send it; the plate handles half of the conversation.
Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp
Heavy logistics: before you take delivery
Being ready when the large frame arrives shortens commissioning. A few simple checks: make sure the truck can reach the unloading point, use the lifting eye bolt, lift the motor by the housing and not the shaft, and glance over the package as you open it for any scratch or knock from transport. If storage is needed, pick a dry, vibration-free place; a heavy machine does not forgive an uneven floor.
Planning the current and cable size up front also helps; for a rough idea from the nameplate current the motor current chart guides you, and for exact values follow your panel and project documents.
To compare the 110 kW electric motor by power and speed and raise a request right awaySEE PRICES
Frequently asked questions
How soon is a 110 kW electric motor delivered?
It depends on the model and the dispatch situation. With our İzmir base we aim for fast delivery across Türkiye; for an exact time send your request and we will work out the shortest plan for the state of the goods together. A numeric day pledge is shared when we confirm the order.
How do I decide between 2, 4 and 6 poles?
By the application's speed and torque need. Fan/pump jobs wanting high speed suit 3000 rpm, balanced jobs 1500 rpm, and hard-starting high-torque jobs 1000 rpm. If unsure, describe the machine and we choose together.
Is a soft starter or inverter a must at this power?
In practice, yes. 110 kW draws a high current on a direct start; a soft starter or frequency inverter protects both the supply and the machine. If you also want speed control, an inverter is preferred.
I want the same as my current electric motor; how does that work?
Photograph the old electric motor's nameplate (power, speed, frame number, voltage, shaft and flange details) and send it. We compare the dimensions and connection and settle on the DRG model that best fits your need.
Electric Motors Related to This Topic — Models and Current Prices
Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.
110 kW Three-Phase Motor 3000 rpm – DRG-315S-2 Cast Iron
- 110 kW · 3000 rpm (2 poles)
- Cast iron frame · IEC 315S
- Shaft: 65 × 140 mm
110 kW Three-Phase Motor 1500 rpm – DRG-315S-4 Cast Iron
- 110 kW · 1500 rpm (4 poles)
- Cast iron frame · IEC 315S
- Shaft: 85 × 170 mm
110 kW Three-Phase Motor 1000 rpm – DRG-315L1-6 Cast Iron
- 110 kW · 1000 rpm (6 poles)
- Cast iron frame · IEC 315L
- Shaft: 85 × 170 mm













