The 160 kW three-phase asynchronous electric motor sits near the very top of the cast-iron frame range; getting a motor of this size moving quickly usually means a whole production line does not have to wait. DRG Motor builds this rating in 3000, 1500 and 1000 rpm options with a cast-iron housing and ships it for prompt delivery from İzmir to all of Türkiye.

160 kW grey cast-iron DRG three-phase asynchronous electric motor, prompt delivery and fast supply

DRG Motor is a manufacturer, supplier and seller of electric motors. You can choose the 160 kW electric motor by speed and mounting type in the online electric motor shop, and see the whole class in the three-phase asynchronous electric motors category.

Where does 160 kW come into play?

This rating belongs to the peak-load class of heavy industry. In the field you meet a 160 kW electric motor most often in front of primary crushers (large jaw and impact crushers), high-flow pump stations, cement and mining mills, long and steep belt-conveyor drives, and big process fans. The shared trait is clear: the load is heavy at start-up, inertia is large, and the machine turns at full load for hours.

With such a load, power alone is not the whole story. 160 kW is built at three speeds; which one fits depends on the speed and torque character your driven machine asks for. High-speed compressors and pressure pumps lean toward 2 poles, general heavy drives and conveyors toward 4 poles, and low-speed high-torque mills and primary crushers toward 6 poles.

Three speeds, one rating: product table

The table below lists the three DRG models at 160 kW; each model code links straight to its product page. Current values are for 400 V, and the voltage connection on all three is 400/690 V (Δ/Y).

ModelSpeedCurrent (400 V)Shaft dia. × length
DRG-315L1-2 (2-pole)3000 rpm265.0 A65×140 mm
DRG-315L1-4 (4-pole)1500 rpm271.0 A85×170 mm
DRG-355M1-6 (6-pole)1000 rpm281.0 A100×170 mm

On the panel side, cable size, protection and contactor selection should be reviewed against the motor's 400 V current. Compare the current-to-power match with the motor current chart, and enter your case into the electric motor calculator.

Click to see current electric motor prices and order nowSEE PRICES →

This rating will not start without soft-starting

At 160 kW the first thing to settle is how the motor will start. Direct-on-line starting is rarely preferred in panels at this class; the current at the moment of start rises to several times the running current and stresses both the supply and the connected machine. Such an electric motor is usually commissioned with a soft starter or a variable-frequency drive (inverter).

Which one fits depends on the application: a drive where variable speed and a controlled ramp are needed, a soft starter where only a gentle start is enough. If this choice is settled before ordering, the panel, cabling and protection can be prepared accordingly. Connection and panel work must be done by qualified electrical personnel; no measurement should begin until the power is cut and the de-energised state is verified.

Weight and unloading: crane and forklift readiness

The 160 kW class comes in 315 and 355 frames, so this is not a small electric motor. The 6-pole model, in the 355 frame, is the largest. To unload a motor of this weight from the vehicle, move it into place and seat it on the base, a crane or forklift is essential on site. When we say "prompt delivery" we mean not only that the motor ships, but that it finds you ready on arrival.

The soundest approach is to arrange the crane, base, coupling and anchoring before the motor is dispatched, so the unit goes into place the day it arrives. It would be wrong to promise an exaggerated delivery time: it depends on the chosen speed, the mounting type and the shipping distance. The right path is to confirm the model first, then plan the dispatch and unloading day together.

What to settle up front when ordering?

From a supplier's view, the most common mix-up at this rating is getting the power right while skipping speed, mounting or shaft size. On a 160 kW electric motor, settling these up front prevents a wrong shipment and a second wait:

  • Speed: 3000, 1500 or 1000 rpm — the speed your machine needs.
  • Mounting type: foot (B3), flange (B5) or foot-and-flange together.
  • Shaft diameter: 65×140 mm on 2-pole, 85×170 mm on 4-pole, 100×170 mm on 6-pole; the coupling and pulley seat on this.
  • Starting: soft starter or drive — the panel is prepared accordingly.

The most practical route: if you are replacing an old unit, photograph the existing motor's nameplate and send it. In the trade, the power-speed-frame line on the nameplate almost decides the right model on its own. If you are building a new line, go by the power and speed given by the machine builder. Discussing whether the coupling, pulley and base fit the shaft diameter at the ordering stage avoids surprises on installation day.

Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp

Frequently asked questions

Which frame does a 160 kW electric motor come in?

It depends on speed: the 2- and 4-pole models come in the 315 frame, while the 1000 rpm 6-pole model comes in the 355 frame. All three are cast-iron (grey iron) housings; the aluminium range stays well below this rating.

Can it be started direct-on-line?

At this rating direct-on-line starting is not advised in most panels; the start current is high. A soft starter or a variable-frequency drive is usually used. We can assess together which one suits your application.

Which provinces do you deliver to?

DRG Motor is based in İzmir and delivers quickly across all of Türkiye, that province included. The shipment leaves İzmir; the exact day is confirmed by the chosen model and distance. For unloading at this weight, we recommend arranging a crane/forklift in advance.

Which speed should I pick?

The speed your driven machine needs decides it. Low-speed, high-torque work such as mills and primary crushers leans to 1000 rpm, conveyors and fans to 1500 rpm, and high-speed compressors and pressure pumps to 3000 rpm. If unsure, let us look at it together with the machine nameplate or builder data.

Click to see the current price of the 160 kW electric motor and get a quote with a delivery planSEE PRICES

Electric Motors Related to This Topic — Models and Current Prices

Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.

ALL MODELS AND DETAILS IN THE ONLINE SHOP →