The 132 kW three-phase asynchronous electric motor is one of the top power steps in the DRG Motor range; it is built on a 315 frame, in cast iron. At this class, one thing usually decides the outcome: being able to get the motor ready for delivery the moment you need it. DRG Motor ships 132 kW in 3000, 1500 and 1000 rpm options fast from İzmir across Türkiye.

132 kW grey cast-iron 315-frame DRG three-phase asynchronous electric motor, ready delivery and fast dispatch

DRG Motor is a manufacturer, supplier and seller of electric motors. You can review the 132 kW electric motor by speed in the online electric motor shop, and compare the whole heavy class in the three-phase asynchronous electric motors category.

Why ready delivery matters at this rating

A 315-frame electric motor is no small part; it is serious weight and serious volume. Keeping a spare on the shelf is easy at small ratings, but at 132 kW few plants hold one. That is exactly where ready delivery comes in: when a main drive stops the whole line stops, and when a compressor or large pump fails production waits. The sentence we hear most in the field is clear: "how fast can you ship the same rating?"

DRG Motor’s İzmir base gives a practical answer. As standard speed and frame options are kept ready, dispatch preparation starts the moment the order is confirmed; the shipment leaves İzmir and reaches your plant by carrier. We make no numeric promise here; lead time depends on the chosen model, the delivery address and the situation that day. We share precise details once you send your model and province.

Three speeds, one rating: the 132 kW table

132 kW is not a single machine. It comes in three speeds by pole count, and which one fits depends on the speed your driven machine asks for. The 3000 and 1500 rpm models are on a 315M frame, the 1000 rpm model on a 315L frame. Each model code opens its product page.

ModelSpeedRated current (400 V)Shaft (D×E)
DRG DRG-315M-23000 rpm (2-pole)222.0 A65x140 mm
DRG DRG-315M-41500 rpm (4-pole)224.0 A85x170 mm
DRG DRG-315L2-61000 rpm (6-pole)232.0 A85x170 mm

All three carry the same rated power: 132 kW, about 180 HP. What changes is torque. On the 3000 rpm side speed is high and shaft torque relatively low; on the 1000 rpm side torque grows while speed falls. The practical link is T = 9550 · P / n. So before saying "just give me 132 kW", you need the speed your machine runs at.

Click to see current electric motor prices and order nowSEE PRICES →

Where does a 132 kW electric motor work?

This rating belongs at the very top of heavy industry. In the field you mostly meet a 132 kW electric motor in front of:

  • large screw and centrifugal compressor sets,
  • high-flow main booster and deep-well pump stations,
  • jaw and cone crushers, mills and ball-grinding lines,
  • large forced-draught fans, extraction and cooling-tower groups,
  • heavy extruders, granulators and calender lines,
  • long belt conveyors in mining, cement and port plants.

They share the same character: hard load, large inertia, tough start, and the motor under load all day. So a 132 kW choice is not done with a power figure alone; start character, speed and mounting are settled up front.

Cast-iron housing and the lifting reality

DRG’s aluminium range reaches up to 11 kW. As 132 kW is far above that, the electric motor at this rating comes only in a cast-iron 315 frame. This is not a choice but what the scale demands. Cast iron gives heavy industry what it looks for: high resistance to impact and vibration, a steady seat at the coupling, and a solid foot-and-shaft structure that keeps its dimensions for years.

The weight itself becomes an advantage; bolted to the foundation, the housing damps its own sway. Yet that same weight makes handling a real job. A 315-frame electric motor is usually lifted not by a forklift but by a crane or hoist; the lifting eyes on the housing are made for exactly this. Settling the lifting and unloading means at the delivery point up front is the step that saves the most time on site. Agreeing on crated/palletised shipping and the unloading method in advance avoids surprises.

400 V connection, current and starting

The 132 kW models are wound 400/690 V (Δ/Y); they connect in delta (Δ) on the common 400 V three-phase supply. Their rated current at 400 V sits between 222 and 232 A with speed. Direct-on-line starting strains the supply heavily at this size; a star-delta or soft starter is chosen almost without exception in this class, and a variable-frequency drive is often on the table too.

On cooling, these motors are surface-cooled by their own fan (IC411); the air path must not be blocked in the panel or mounting space. Choose thermal protection, contactor and cable cross-section to the real value on the motor nameplate. Do not work under live power, verify isolation, and leave the connection to authorised electrical staff.

Our cable size calculator and motor current chart give a starting point; you can sketch the power-speed balance with the electric motor calculator.

Fast dispatch from İzmir and project supply

DRG Motor is based in İzmir and delivers by carrier to all of Türkiye, that city included. At 132 kW there are two typical cases. One is urgent: replacing a failed motor fast to save a stopped main drive. The other is planned: supplying one or several large electric motors in advance for a new investment or overhaul. We handle both through the same channel.

Reaching your plant in İstanbul, Kocaeli, Bursa, Ankara, Zonguldak or a mining-cement region with a motor of this rating needs logistics planning because of the housing weight. For project-based supply, share the quantity, speed and delivery schedule in advance and we shape the shipment accordingly, settling the unloading means together. That way the motor meets no unexpected obstacle when it arrives on site.

Four things to settle when ordering

Four facts are enough to land on the right 132 kW model:

  1. Speed: the speed your machine needs (3000, 1500 or 1000 rpm).
  2. Mounting and shaft: foot (B3), flange (B5) or combined; shaft diameter 65 mm at 2-pole, 85 mm at 4 and 6-pole.
  3. Voltage and starting: your site supply (commonly 400 V three-phase) and the start method (star-delta, soft starter or drive).
  4. Application and lifting: which machine it turns, how hard the start is, and the crane/hoist means at the delivery point.

With these four you can select the right model in the electric motor shop and complete the order. If you are replacing an existing motor, the most practical way is to photograph the old nameplate and send it to us; where you hesitate, we look together.

Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp

See the current options and price for your 132 kW electric motor in the shop.SEE PRICES

Frequently asked questions

How many HP is 132 kW?

132 kW is about 180 HP (1 HP ≈ 0.746 kW). Buyers looking for a "180 HP electric motor" are usually pointed to this power class too.

Is there an aluminium housing at 132 kW?

No. The aluminium range is built up to 11 kW; 132 kW is far above that and comes only in a cast-iron 315 frame, which also provides the strength a heavy load needs.

3000, 1500 or 1000 rpm, which one?

Your machine decides: 3000 rpm for fast compressors and centrifugal pumps, 1500 rpm for general main drives, 1000 rpm for hard-starting crushers and mills. If unsure, describe your application or check the calculator.

What is needed to lift this motor?

The 315 frame is heavy, so a forklift is often not enough; a crane or hoist is needed. It is slung from the lifting eyes on the housing. If you share the unloading means at the delivery point when ordering, we plan the shipment accordingly.

Electric Motors Related to This Topic — Models and Current Prices

Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.

ALL MODELS AND DETAILS IN THE ONLINE SHOP →