The 132 kW three-phase asynchronous electric motor sits near the top of the cast-iron frame range; when a motor like this is needed, fast supply usually means a whole production line does not have to wait. DRG Motor builds this rating in 3000, 1500 and 1000 rpm options with a cast-iron housing and ships it for prompt delivery from İzmir to all of Türkiye.
DRG Motor is a manufacturer, supplier and seller of electric motors. You can choose the 132 kW electric motor by speed and mounting type in the online electric motor shop, and see the whole class in the three-phase asynchronous electric motors category.
What work does a 132 kW electric motor pull?
This rating is now above the mid-drive class as well. In the field you meet a 132 kW electric motor most often in front of primary crushers, high-flow pump stations, cement and mining mills, heavy belt-conveyor drives, large air compressors and big fans. Their shared trouble is clear: the load is hard at start-up, the kick-off is heavy, and the motor turns at full load for hours.
With such a load, talking about power alone falls short. 132 kW is built at three different speeds at once, and which one fits depends on the speed and torque character your driven machine asks for.
Starting is not trivial: the soft-start question
At 132 kW the first thing to settle is how the motor will start. Direct-on-line starting is rarely preferred in panels at this class, because the current at the moment of start rises to several times the running current and stresses both the supply and the connected machine. In the field a 132 kW electric motor is usually commissioned with a soft starter or a variable-frequency drive (inverter).
Which one fits depends on the application: a drive where variable speed and a precise ramp are needed, a soft starter where easing only the start is enough. Cable size, protection and contactor choice in the panel must be reviewed against the motor's 400 V current. Check the current-power match with the motor current chart and enter your application into the electric motor calculator. Panel and wiring work must be done by authorised electrical staff, and no measurement should begin before the power is isolated.
Click to see current electric motor prices and order nowSEE PRICES →
Three speeds, three characters
At 132 kW, three DRG models deliver the same power at different speeds. In the table below each model code links straight to its product page; the currents are for 400 V.
| Model | Speed | Current (400 V) | Shaft dia. × length |
|---|---|---|---|
| DRG-315M-2 (2-pole) | 3000 rpm | 222.0 A | 65x140 mm |
| DRG-315M-4 (4-pole) | 1500 rpm | 224.0 A | 85x170 mm |
| DRG-315L2-6 (6-pole) | 1000 rpm | 232.0 A | 85x170 mm |
The 2-pole 3000 rpm suits large compressors and some high-pressure pumps; the 4-pole 1500 rpm fits belt conveyors, fans and general heavy drives; the 6-pole 1000 rpm stands out in low-speed, high-torque work such as mills and primary crushers. The voltage connection on all three is 400/690 V (Δ/Y).
Prompt delivery, but plan the logistics too
The 132 kW class comes on the 315 frame, so this is not a small motor. Lifting, placing and bolting an electric motor of this weight needs a forklift or a crane on site. By "prompt delivery" we mean not only that the motor leaves quickly, but that it finds you ready: if the crane, base, coupling and anchors are prepared in advance, the motor goes into place the day it arrives.
It would be wrong to promise more on lead time. It depends on the chosen speed, the mounting type and the shipping distance. The right path is to confirm the model first, then plan the dispatch and unloading day together — so a motor at this scale does not wait a second time because of the wrong speed or flange.
What to settle when ordering
From a supplier's view, the most common mix-up at this rating is getting the power right but skipping speed, mounting or shaft size. On a 132 kW electric motor, settling these points up front prevents wrong shipments and repeated waiting:
- Speed: 3000, 1500 or 1000 rpm — the speed your machine needs.
- Mounting type: foot (B3), flange (B5) or foot-and-flange together.
- Shaft diameter: 65x140 mm at 2 poles, 85x170 mm at 4 and 6 poles; the coupling fits this.
- Starting: soft starter or drive — the panel is prepared accordingly.
The most practical route: if you are replacing an old one, photograph its nameplate and send it. In field terms, the power-speed-housing line on that plate almost settles the right model on its own. For a new line, use the power and speed given by the machine builder. At this scale, discussing whether the coupling, pulley and base fit the shaft diameter during ordering avoids surprises on installation day.
Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp
Frequently asked questions
How many horsepower is a 132 kW electric motor?
About 180 HP (1 HP ≈ 0.746 kW). The catalogue lists both kW and HP; ordering by kW avoids confusion.
Can it be started direct-on-line?
At this rating direct-on-line is rarely advised in panels; the starting current is high. A soft starter or a variable-frequency drive is usually used. We can assess which suits your application together.
Which provinces do you deliver to?
DRG Motor is based in İzmir and delivers fast to all of Türkiye, that province included. The shipment leaves İzmir; the exact day is confirmed by model and distance. For this weight we suggest preparing a crane/forklift for unloading in advance.
Why is the housing cast iron?
DRG's aluminium range reaches up to 11 kW; 132 kW is far above that. At this rating the electric motor comes with a cast-iron (grey iron) housing, natural for resistance to impact and vibration, a steady seat at the coupling and a structure that holds its dimensions for years.
Click to see the current price of the 132 kW electric motor and get a quote with a delivery planSEE PRICES
Electric Motors Related to This Topic — Models and Current Prices
Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.
132 kW Three-Phase Motor 3000 rpm – DRG-315M-2 Cast Iron
- 132 kW · 3000 rpm (2 poles)
- Cast iron frame · IEC 315M
- Shaft: 65 × 140 mm
132 kW Three-Phase Motor 1500 rpm – DRG-315M-4 Cast Iron
- 132 kW · 1500 rpm (4 poles)
- Cast iron frame · IEC 315M
- Shaft: 85 × 170 mm
132 kW Three-Phase Motor 1000 rpm – DRG-315L2-6 Cast Iron
- 132 kW · 1000 rpm (6 poles)
- Cast iron frame · IEC 315L
- Shaft: 85 × 170 mm













