The 160 kW three-phase asynchronous electric motor is one of the highest ratings in the DRG Motor catalogue; at this step, being able to get the motor ready for delivery the moment you need it often matters as much as the machine itself. DRG Motor keeps this rating ready in 3000, 1500 and 1000 rpm options with a cast-iron housing and ships it fast from İzmir across Türkiye.
DRG Motor is a manufacturer, supplier and seller of electric motors. You can choose the 160 kW electric motor by speed and mounting type in the online electric motor shop, and see the whole heavy class together in the three-phase asynchronous electric motors category.
Why ready delivery decides it at this rating
The 160 kW class comes on the 315 and 355 frames. That means a machine well over half a tonne that will not move without a forklift or a crane. Few plants keep an electric motor like this as a spare on the shelf; usually there is a single main drive, and when it stops the whole line stops. When a crusher feed, a high-flow transfer pump or a large air compressor goes down, every lost hour reaches far beyond the motor's own cost.
That is why, at this class, "how fast can you ship the same rating" comes before price. DRG Motor's İzmir base is a practical answer: standard speed and frame options are kept ready, and dispatch preparation starts the moment the order is confirmed. We make no inflated promise on the exact day; it depends on the chosen model, the delivery address and the situation that day. We share precise details once your model and province are clear.
Three speeds, one rating: which one fits?
160 kW is not a single machine. As the pole count changes, so do the speed and the shaft diameter; the right choice is set by the speed and torque your driven machine needs. In the table below each model code links straight to its product page; the currents are for 400 V.
| Model | Speed | Current (400 V) | Shaft × frame |
|---|---|---|---|
| DRG-315L1-2 (2-pole) | 3000 rpm | 265.0 A | 65x140 mm · 315L |
| DRG-315L1-4 (4-pole) | 1500 rpm | 271.0 A | 85x170 mm · 315L |
| DRG-355M1-6 (6-pole) | 1000 rpm | 281.0 A | 100x170 mm · 355M |
The 2-pole 3000 rpm stands out on large compressors and some high-pressure pumps. The 4-pole 1500 rpm is the most common; it suits belt conveyors, forced-draught fans and general heavy drives. The 6-pole 1000 rpm fits low-speed, high-torque work such as mills and primary crushers and comes on the 355M frame. The voltage connection on all three is 400/690 V (Δ/Y); note that the shaft grows thicker, not thinner, toward the lower speed.
Click to see current electric motor prices and order nowSEE PRICES →
Plan the start-up first: soft-start and panel
At 160 kW, how the motor starts matters as much as which model you buy. Direct-on-line starting is rarely preferred in panels of this class, because the current at the moment of start rises to several times the running current and stresses both the supply and the connected machine. In the field a 160 kW electric motor is usually commissioned with a soft starter or a variable-frequency drive. A drive where variable speed and a precise ramp are needed, a soft starter where easing only the start is enough.
On the panel side, cable size, protection and contactor choice must be reviewed against the motor's 400 V current. Check the current-power match with the motor current chart and enter your application into the electric motor calculator. Panel and wiring work must be done by authorised electrical staff; no measurement should begin before the power is isolated and the absence of voltage confirmed. Set exact values according to the motor nameplate and the device documentation.
Prepare the dispatch day before the motor arrives
By "ready delivery" we mean not only that the motor sets off, but that it finds you ready. For an electric motor of this weight, if the lifting gear, base, coupling and anchors are prepared in advance, the motor goes into place the day it arrives; otherwise it waits at the gate. The most common delay in the field is not a late motor but a delivered motor with no crane to unload it.
So when we plan the shipment we talk both sides through: we confirm the dispatch day, and you set the unloading and installation day accordingly. That way a motor at this scale does not wait a second time because of the wrong speed or flange.
What to settle when ordering
From a supplier's view, the most common mix-up at this rating is getting the power right but skipping speed, mounting or shaft size. On a 160 kW electric motor, settling these four points up front prevents wrong shipments and repeated waiting:
- Speed: 3000, 1500 or 1000 rpm — the speed your machine needs.
- Mounting type: foot (B3), flange (B5) or foot-and-flange together.
- Shaft diameter: 65x140 mm at 2 poles, 85x170 mm at 4 poles, 100x170 mm at 6 poles; the coupling and pulley fit this.
- Starting: soft starter or drive — the panel is prepared accordingly.
The most practical route: if you are replacing an old one, photograph its nameplate and send it. In field terms, the power-speed-housing line on that plate almost settles the right model on its own. For a new line, use the power and speed given by the machine builder.
Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp
Frequently asked questions
How many horsepower is a 160 kW electric motor?
About 215 HP (1 HP ≈ 0.746 kW, 160 ÷ 0.746). The catalogue names power in both kW and HP; ordering by kW avoids confusion.
Can it be started direct-on-line?
At this rating direct-on-line is rarely advised in panels; the starting current is high. A soft starter or a variable-frequency drive is usually used. We can assess which suits your application together.
Which provinces do you deliver to?
DRG Motor is based in İzmir and delivers fast to all of Türkiye, that province included. The shipment leaves İzmir; the exact day is confirmed by model and distance. For this weight we suggest preparing a crane or forklift for unloading in advance.
Why does 160 kW come with a cast-iron housing?
DRG's aluminium range reaches up to 11 kW; 160 kW is far above that. At this rating the electric motor is built with a cast-iron (grey iron) housing, natural for resistance to impact and vibration, a steady seat at the coupling and a structure that holds its dimensions for years.
Click to see the current price of the 160 kW electric motor and get a quote with a dispatch planSEE PRICES
Electric Motors Related to This Topic — Models and Current Prices
Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.
160 kW Three-Phase Motor 3000 rpm – DRG-315L1-2 Cast Iron
- 160 kW · 3000 rpm (2 poles)
- Cast iron frame · IEC 315L
- Shaft: 65 × 140 mm
160 kW Three-Phase Motor 1500 rpm – DRG-315L1-4 Cast Iron
- 160 kW · 1500 rpm (4 poles)
- Cast iron frame · IEC 315L
- Shaft: 85 × 170 mm
160 kW Three-Phase Motor 1000 rpm – DRG-355M1-6 Cast Iron
- 160 kW · 1000 rpm (6 poles)
- Cast iron frame · IEC 355M
- Shaft: 100 × 170 mm













