When buying an electric motor, the two documents asked for most are the catalogue and a technical sheet: the frame size, shaft diameter, connection logic and nameplate values. At DRG Motor you can get all of this through three channels; the product page, a quotation prepared for you, and a technical document sent on request.

Grey DRG three-phase asynchronous electric motor representing the electric motor catalogue and technical document request

DRG Motor is a manufacturer, supplier and seller of electric motors, so you can ask about a model's technical data and its supply from the same place. You can filter the electric motor that best fits your need by power and speed in the online electric motor shop and see the same models together in the three-phase asynchronous electric motors category.

What is in the catalogue and the technical document?

The catalogue shows DRG's power range together: three-phase asynchronous models from 0.25 kW in aluminium up to 355 kW in cast iron, the 1000/1500/3000 rpm speed classes and the IEC frame sizes. A technical document, by contrast, drills down to a single model. The three sheets asked for most break down like this:

  • Dimension (size) data: frame centre height, shaft diameter and length, foot hole spacing, and on a B5 flange the outside diameter and spigot. A motor that has to meet a coupling, pulley or gearbox input is chosen with these figures.
  • Connection diagram: whether the terminal box is wired in delta or star for the supply voltage. Models up to 3 kW run on 230/400 V and those of 4 kW and above on 400/690 V; the diagram makes that split clear.
  • Technical value table: a row that brings power, speed, current at 400 V, torque and shaft size together. For the electrician sizing the panel and protection, this is the most practical sheet.

Which technical document, and when?

The need differs on every project. If you are designing a new machine, the dimension drawing and flange detail usually come first; if you are replacing an existing motor, the real comparison is shaft diameter and frame size. The team wiring the panel wants the current value and the connection diagram. Tell us which document you need up front and we send that model's sheet directly, with no back-and-forth in between.

A short caution is worth adding: before connection and commissioning, cut the power, confirm it is de-energised and have the work done by authorised electrical personnel. The document guides you, but a qualified person should do the job.

Click to see current electric motor prices and order nowSEE PRICES →

What should you send us when requesting a document?

The fastest route is a photo of the nameplate on your motor. The nameplate shows power, speed, voltage and often the frame size; those four details tell us at a glance which document to prepare. If you do not have the motor to hand, describing what the machine does and the speed it needs is enough. If you are unsure about power and speed, our electric motor calculator gives a first idea, and the motor current chart shows the current range for the panel side.

What if a non-standard power is requested?

Sometimes a request arrives as "I need a 10 kW motor". In asynchronous motors the power steps are standard; instead of 10 kW the nearest standard value is 11 kW. Because the catalogue shows these steps, we match your request to the nearest built value and then share that model's technical document. That way the figure on paper and the motor that goes to the field agree.

An example technical value table

Below are the technical values of four example aluminium-housing models from the 1500 rpm class. In a real technical document the rows read in this order; each model code links straight to its product page.

ModelPowerSpeedCurrent (400 V)
DRG-112M-4-AL4 kW (5.5 HP)1500 rpm7.95 A
DRG-132S-4-AL5.5 kW (7.5 HP)1500 rpm10.7 A
DRG-112M-4K-AL5.5 kW (7.5 HP)1500 rpm10.7 A
DRG-132M-4-AL7.5 kW (10 HP)1500 rpm14.3 A

Documents are prepared the same way for cast iron housings and the 1000/3000 rpm classes; you can request the dimension and connection data for any model on the shop page.

From catalogue to order

The catalogue narrows the choice, the technical document settles the decision and the quotation ties it together. DRG Motor is based in İzmir and delivers quickly by cargo to the whole of Türkiye, that city included; while you study the document we can also discuss delivery. You can review your chosen model in the online shop, ask for a quote and request the dimension or connection document at the same time.

Click to see current prices of the electric motors in the catalogue and request a quoteSEE PRICES

Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp

Frequently asked questions

How can I request a technical document?

Just send the model code or a photo of the motor nameplate. Tell us which sheet you want (dimensions, connection diagram or technical value table) and we prepare and share that model's document.

What if I need a power that is not in the catalogue?

We match your need to the nearest standard power and send that model's technical data. For example, 11 kW is matched instead of 10 kW; we settle the choice together.

Are dimension and connection data on the product page too?

Product pages carry power, speed and the basic data. If you need a detailed dimension drawing or connection diagram, send the model code and we send the relevant document separately.

I am in another city, how do the document and delivery work?

DRG Motor is based in İzmir; sharing documents continues by phone and WhatsApp regardless of the province, and delivery is made quickly by cargo across Türkiye.

Electric Motors Related to This Topic — Models and Current Prices

Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.

ALL MODELS AND DETAILS IN THE ONLINE SHOP →