A 75 kW three-phase asynchronous electric motor is usually the one turning a plant's main drive; when a motor at this rating stops, the line often stops with it. That is why being able to get the 75 kW electric motor ready for delivery matters before any spec sheet does. DRG Motor offers this rating in 3000, 1500 and 1000 rpm options with a cast-iron housing, shipping it fast from İzmir to all of Türkiye.

75 kW grey cast-iron DRG three-phase asynchronous electric motor, ready delivery and fast supply

DRG Motor is a manufacturer, supplier and seller of electric motors. You can pick the 75 kW electric motor that best fits your need by power and speed in the online electric motor shop, and view the whole power class together in the three-phase asynchronous electric motors category.

What does a 75 kW electric motor stand in front of?

This is the upper-middle band of heavy industry. You meet this roughly 100 HP rating most often on large screw and piston compressor sets, on crusher and mill lines in mining and cement plants, on main lift pumps at water and wastewater stations, on high-pressure irrigation and booster sets, on plastic extruders and recycling shredders, on marble gang saws and large profile machining centres, and on boiler-room and paint-shop extraction blowers.

Their shared trait fits in one line: the load is big, the start is hard, the machine stays under load all day. Ordering such a motor as just "75 kW" is incomplete, because the same power is built at three different speeds, and which one fits depends on the rotation speed and torque your driven machine asks for.

What do we mean by ready delivery?

At this rating the field's first question is almost always the same: "When can I have it?" When a compressor or main pump fails, the plant cannot wait. DRG Motor's İzmir-based setup helps here: the moment the model is confirmed, dispatch is prepared, the shipment leaves İzmir and reaches your address by carrier.

We prefer not to promise an exaggerated date. Delivery depends on the chosen speed, the frame size and the distance. The soundest route is to confirm the model over WhatsApp or by quote, then settle the dispatch day together. At 75 kW the motor is rarely a single item; it is planned alongside a coupling, pulley, base or panel equipment. Discussing these up front keeps the installation day free of surprises.

Click to see current electric motor prices and order nowSEE PRICES →

Three speeds, three working characters

At 75 kW, three DRG models deliver the same power at different speeds. In the table below each model code links straight to its product page; currents are for 400 V.

ModelSpeedCurrent (400 V)Shaft × length
DRG-280S-2 (2-pole)3000 rpm127.0 A65x140 mm
DRG-280S-4 (4-pole)1500 rpm129.0 A75x140 mm
DRG-315S-6 (6-pole)1000 rpm136.0 A85x170 mm

The 2-pole 3000 rpm model suits high-speed compressors and some pressure pumps; the 4-pole 1500 rpm, the most common factory drive speed, fits fans, conveyors, pumps and general machines; the 6-pole 1000 rpm serves low-speed, high-torque work such as mills, crushers and heavy mixers. If you are unsure which speed fits, check the power-current match with the motor current chart and enter your application into the electric motor calculator.

Why is the housing cast iron at this rating?

DRG's aluminium range reaches up to 11 kW; 75 kW is far above that. So at this rating the electric motor comes with a cast-iron (grey iron) housing. This is not a preference but the natural result of scale. Cast iron gives heavy-industry installation what it expects: high resistance to impact and vibration, a steady seat at the coupling and belt-pulley drive, and a solid foot-and-shaft structure that holds its dimensions for years.

Frame size changes with speed

One detail is worth noting: at 75 kW the frame is not the same at every speed. The 2- and 4-pole models come in the 280 frame, while the 6-pole 1000 rpm model steps up to the 315 frame, because delivering the same power at a lower speed needs a larger magnetic cross-section. That changes the shaft, the foot holes and the mounting dimensions. If you are swapping an old motor, this difference directly concerns your base and coupling.

Shaft, coupling and mounting

In the 75 kW class the shaft diameter grows with speed: 65x140 mm at 2 poles, 75x140 mm at 4 poles, and 85x170 mm at 6 poles with the 315 frame. The coupling, pulley and base holes fit these dimensions, so knowing the current shaft diameter and the mounting type (B3 foot, B5 flange or B35 foot-and-flange) before ordering saves both time and a second shipment. Lifting and aligning a motor this heavy is a job in itself; in field terms, getting the coupling alignment right from the start directly sets bearing life.

What to settle when ordering

From a supplier's view the most common mix-up is this: the power is stated correctly, but the speed or mounting type is skipped. On a 75 kW electric motor, settling these four points up front prevents wrong shipments and repeated waiting.

  • Speed: 3000, 1500 or 1000 rpm — the rotation speed your machine needs.
  • Mounting type: foot (B3), flange (B5) or foot-and-flange (B35).
  • Shaft diameter: the coupling or pulley fits exactly this dimension.
  • Voltage connection: 400/690 V (Δ/Y); delta or star to suit your panel.

The most practical route: photograph the nameplate of your current motor and send it. The power-speed-housing line on that plate almost settles the right model on its own. If you are building a new line, use the power and speed given by the machine maker. Reviewing the panel's thermal and contactor choice against the motor's 400 V current also helps you finish the installation in one go; you can read those current values from the table above.

Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp

Frequently asked questions

How many horsepower is a 75 kW electric motor?

It is about 100 HP (1 HP ≈ 0.746 kW). The catalogue lists both kW and HP; ordering by kW avoids confusion.

Which speed should I choose?

It depends on the speed your driven machine needs. Use 3000 rpm for high-speed work, 1500 rpm for general drives, and 1000 rpm where low speed and high torque are required. If unsure, describe the application and we will decide together.

Which provinces do you deliver to?

DRG Motor is based in İzmir and delivers fast to all of Türkiye, that province included. The shipment leaves İzmir; the exact day is confirmed by model and distance.

Why is the 6-pole model in a larger frame?

Delivering the same power at a lower speed needs a larger magnetic cross-section, so the 1000 rpm 75 kW model moves to the 315 frame. That changes the shaft diameter and mounting dimensions; if you are replacing a motor, check the base accordingly.

Click to see the current price of the 75 kW electric motor and request a quoteSEE PRICES

Electric Motors Related to This Topic — Models and Current Prices

Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.

ALL MODELS AND DETAILS IN THE ONLINE SHOP →