Getting a 75 kW electric motor onto the shop floor quickly depends on two things running at once: the right model being available and the heavy unit moving on solid logistics. DRG Motor is a manufacturer, supplier and seller of electric motors; it is based in İzmir and ships fast across the whole of Türkiye, İzmir included. Below is what to check in this power class for fast delivery and supply.

Grey 75 kW cast-iron DRG three-phase asynchronous electric motor

The process speeds up once you know the running speed and the mounting type. Pick the right housing by power and speed in the online electric motor shop, and see the same range together in the three-phase asynchronous electric motors category.

Where does a 75 kW electric motor usually run?

This is no longer small workshop work. In the field we see 75 kW most on crusher and breaker lines, large screw compressors, stone and feed mills, high-flow centrifugal pumps and big extractor fans. The common thread: each one either spins up a heavy mass or turns continuously under high load.

That is why a cast-iron housing is standard in this class. Cast iron absorbs vibration, sheds heat better and stands up to the shock loads that show themselves on jobs like crushing. In DRG's range from 0.25 to 355 kW, 75 kW sits right in the middle of this heavy-industry band.

Fast delivery and supply: how it works

When a line stops, the question is not only "is a motor available"; that motor has to be the right speed, the right shaft diameter and the right connection. Settle these at the order stage and the delivery window shrinks, because the days lost returning a wrong model simply disappear.

Our İzmir base connects to every province through a cargo and freight network, that city included. Our physical point is in İzmir; deliveries to other provinces run on fast transport. Rather than promising an exact day, we prefer to confirm the order and plan the shortest dispatch route together. In this class the real clock is usually model selection and heavy-load logistics, not a shelf line.

Click to see current electric motor prices and order nowSEE PRICES →

Speed choice: same power, three characters

75 kW comes in several speeds, and which you pick changes the outcome. Speed is set by the number of poles: 2 poles about 3000 rpm, 4 poles about 1500 rpm, 6 poles about 1000 rpm. As speed drops, torque at the same power rises; so mills and crushers with heavy starts often use 1000 or 1500 rpm, while high-flow pumps and compressors favour 3000 rpm.

ModelSpeedCurrent (400 V)Shaft dia.
DRG-280S-23000 rpm127 A65 mm
DRG-280S-41500 rpm129 A75 mm
DRG-315S-61000 rpm136 A85 mm

The figures come from DRG nameplate data. Shaft diameter grows with speed, so size the coupling and pulley to match. To work out the real torque of your load, the electric motor calculator helps.

Starting and the panel side

At 75 kW, direct-on-line starting hits the supply hard. Most plants in this class use star-delta or a soft starter; the motor's 400/690 V (Δ/Y) connection makes both possible. Getting the starting current and cable size right when you build the panel heads off later heating and voltage-drop problems.

Our ready tables make this easier: the motor current chart and the motor cable size calculator. For panel and connection work, cut the power, confirm it is dead and have the job done by qualified electrical staff; set values according to the motor nameplate and the equipment documentation.

Heavy logistics and checks on delivery

These units are not something you carry by hand. At the delivery point a forklift or crane, a proper pallet and a lifting eye should be ready. The snag we meet most is the motor arriving while the unloading gear has not been arranged, which keeps the line waiting.

When it reaches you, first turn the shaft by hand to see it runs free, check the terminal box and the nameplate, and confirm the shaft diameter matches your coupling. If there is impact damage from transport, photograph it before opening. These simple checks prevent surprises on fitting day.

What to settle at the order stage

Five points are enough for the right 75 kW electric motor: power (kW), speed or number of poles, mounting type (foot-mounted B3 or flange B5), plant voltage and shaft diameter. If you are replacing an old one, the safest route is to read its nameplate; sending us those values gets the choice right the first time.

Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp

Click to see the current price of the 75 kW electric motor that fits your need and to orderSEE PRICES

Frequently asked questions

Which speed should I pick for 75 kW?

It depends on the job. For heavy, shock starts (crushers, mills) low speed gives more torque, so 1000 or 1500 rpm stand out; high-flow pumps and compressors favour 3000 rpm. If unsure, describe the machine and load and we will settle it together.

Which provinces do you deliver to?

Our physical point is in İzmir, and we ship across the whole of Türkiye, that city included, by fast cargo and freight. Since 75 kW is a heavy load, we plan the dispatch route together at the order stage.

Direct start or a soft starter?

At this power a direct start stresses the supply; most plants use star-delta or a soft starter. The motor's 400/690 V connection suits both methods. Build the panel with qualified staff, following nameplate and documentation values.

Electric Motors Related to This Topic — Models and Current Prices

Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.

ALL MODELS AND DETAILS IN THE ONLINE SHOP →