To get a 7.5 kW (about 10 HP) three-phase asynchronous electric motor on fast delivery, three details must be clear first: speed, housing material and shaft-mounting size. DRG Motor keeps this rating ready at 3000, 1500 and 1000 rpm, in both aluminium and cast-iron housings, and ships it fast from İzmir to every province of Türkiye.

7.5 kW grey DRG three-phase asynchronous electric motor, ready to deliver

DRG Motor is a manufacturer, supplier and seller of electric motors. Below you will find the technical data of the 7.5 kW class and the ready-to-deliver variants; you can pick the model you need in the online electric motor shop and see the whole range together in the three-phase asynchronous electric motors category.

Ready-to-deliver 7.5 kW variants

A power figure alone does not make an order; this is the single most common sticking point we see in the field. For 7.5 kW, six configurations are kept ready: three speed classes, each in aluminium and cast iron. The table below shows them all together.

ModelPoles / SpeedHousingIEC frame
DRG DRG-132S2-22 poles / 3000 rpmaluminium132S
DRG DRG-132M-44 poles / 1500 rpmaluminium132M
DRG DRG-160M-66 poles / 1000 rpmaluminium160M
DRG DRG-132S2-22 poles / 3000 rpmcast iron132S
DRG DRG-132M-44 poles / 1500 rpmcast iron132M
DRG DRG-160M-66 poles / 1000 rpmcast iron160M

Note: the 1000 rpm (6-pole) model, though it delivers the same power, is a 160 frame; the 3000 and 1500 rpm models are a 132 frame. So the slower electric motor is physically larger and heavier, which directly affects mounting, from foot holes to shaft size.

Click to see current electric motor prices and order nowSEE PRICES →

Shaft and mounting: the critical size when replacing

The detail most often missed when replacing an existing electric motor is the shaft diameter. In the 7.5 kW class there are two shaft ends, and the coupling, pulley or gearbox input is chosen accordingly:

At the same frame, aluminium and cast iron share identical shaft and foot dimensions, so switching the housing material does not disturb mounting; only weight and mechanical strength change. If you are moving onto a coupled drive, measuring and sending the old motor shaft diameter prevents the wrong part from arriving.

7.5 kW technical data: current and connection

All six variants are wound 400/690 V (Δ/Y) and connect in delta (Δ) on the common 400 V three-phase supply. Rated current varies slightly with speed, because power factor and load character change at lower speed:

SpeedRated current (400 V)Shaft (D×E)Voltage
3000 rpm (2 poles)13.7 A38 × 80 mm400/690 V (Δ/Y)
1500 rpm (4 poles)14.3 A38 × 80 mm400/690 V (Δ/Y)
1000 rpm (6 poles)15.4 A42 × 110 mm400/690 V (Δ/Y)

These current values are the starting point for thermal relay and cable sizing; always read the exact value from the motor nameplate. Our cable size calculator and motor current chart can help with the choice. For connection and measurement work, isolate the supply, verify it is dead and leave the task to authorised electrical staff.

Which speed for which job?

The trick to picking the right box on fast delivery is knowing the speed the machine needs:

  • 3000 rpm (2 poles): high speed, low torque. Preferred on centrifugal pumps, high-pressure blowers and some compressor drives.
  • 1500 rpm (4 poles): the most requested balance. Fans, conveyors, booster sets and most general drives are solved here.
  • 1000 rpm (6 poles): low speed, high torque. Mixers, mills and heavy-starting belts, that is slow and demanding loads.

On a directly coupled application, changing the speed changes the machine capacity, so replacing a 1500 rpm motor with a 3000 rpm one is usually wrong. If unsure, describe the application in a few words and we will decide together by load type.

Aluminium or cast iron?

Both give the same electrical value; the choice depends entirely on the working environment. An aluminium housing is light and easy to carry and lift, a comfort for electric motors that move often or sit high up. A cast-iron housing is heavier and sturdier, more resistant to impact, vibration and harsh conditions, and stands out in fixed heavy-industry installs. Since shaft and foot sizes are identical, the decision follows the installation, not performance.

Fast dispatch from İzmir, across Türkiye

DRG Motor is based in İzmir and ships fast by cargo to all of Türkiye, that city included. Because 7.5 kW is a common rating, standard speed and housing options are kept ready, shortening the time between order and dispatch. For a plant in the Aegean, or a factory in Central Anatolia or Marmara, we send goods out quickly with the same approach. For an urgent breakdown replacement, just send us your model and province for precise delivery details; bulk purchases and project supply run through the same channel.

Four things to settle before ordering

The most practical way to avoid the wrong box is to pin down four points before ordering:

  1. Speed: 3000, 1500 or 1000 rpm.
  2. Housing: aluminium or cast iron.
  3. Mounting and shaft: foot (B3), flange (B5/B14) or combined; shaft diameter.
  4. Voltage: your site supply (commonly 400 V three-phase).

If you are replacing an existing electric motor, the fastest route is to photograph the old motor nameplate and send it to us; we confirm power, speed, housing and shaft together from there. Once the right model is set, you can complete the order in the shop.

Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp

See the ready 7.5 kW electric motor configurations and current prices in the shop.SEE PRICES

Frequently asked questions

Are 7.5 kW and 10 HP the same?

In practice, yes. 7.5 kW is about 10 HP (1 HP ≈ 0.746 kW). Buyers looking for a "10 HP electric motor" are pointed to this power class too.

Why is the 1000 rpm model larger?

Delivering the same power at a lower speed needs a larger magnetic circuit, so the 7.5 kW 1000 rpm model is a 160 frame while the 3000 and 1500 rpm models are a 132 frame. The difference shows in weight and shaft size.

What if I do not know my old motor shaft?

Just measure the shaft diameter with a caliper or send us the motor nameplate. A 132 frame has a 38 mm shaft and a 160 frame a 42 mm shaft; your coupling or pulley is chosen accordingly.

How long does fast delivery take?

Because 7.5 kW is a common rating, standard variants leave quickly. The exact time depends on the province and the model you choose; send us your model and province and we plan the fast route together.

Electric Motors Related to This Topic — Models and Current Prices

Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.

ALL MODELS AND DETAILS IN THE ONLINE SHOP →