For plants that urgently need a 55 kW three-phase asynchronous electric motor, the core of the job is delivery speed: once the right speed and mounting type are clear, DRG Motor ships this power in a cast-iron frame from its İzmir base to the whole of Türkiye quickly. This power class is heavy drive work, so transport and the starting method are discussed alongside supply from the very start.

Grey cast-iron DRG 55 kW three-phase asynchronous electric motor ready for fast delivery

DRG Motor is a manufacturer, supplier and seller of electric motors. You can pick the 55 kW model by speed in the online electric motor shop, and see the same class together in the three-phase asynchronous electric motors category.

Where a 55 kW motor earns its keep

This power is well beyond small drives. On site a 55 kW electric motor is most often found driving jaw and cone crushers, two-stage screw compressors, ball mills in cement and mining, high-flow surface pump sets, large granulators and extruders, and heavy belt-conveyor drives. The common thread: the load is either very harsh at start-up or swings all day long. Both call for no compromise on the frame or the starting method.

How delivery and shipping work

A 55 kW electric motor is no longer a one-person load; 250M–280M frames are palletised and moved by forklift or crane. Once the order is settled the unit is packed at the İzmir base and sent to your province by carrier. Fast delivery is made to every province, İzmir included; having a forklift or suitable lifting gear ready at your end for unloading is the single detail that shortens the process most.

We share the weight and frame size up front at the ordering stage, so you can arrange your crane capacity and the clearance in front of the panel in advance. In an urgent supply, the biggest time loss is having no gear to unload the unit when it arrives.

Click to see current electric motor prices and order nowSEE PRICES →

Three speeds, three characters

The same 55 kW does an entirely different job at different speeds. Speed is set by the number of poles, while torque grows as speed drops. The table below lists DRG's 55 kW options with their rated current at 400 V and shaft diameter. The codes link straight to the product page.

ModelSpeedCurrent (400 V)Shaft
DRG-250M-23000 rpm93.5 A60x140 mm
DRG-250M-41500 rpm97.6 A65x140 mm
DRG-280M-61000 rpm98.1 A75x140 mm

The 2-pole 3000 rpm model suits compressors and high-speed pumps; the 4-pole 1500 rpm model fits conveyors, fans and general drive; the 6-pole 1000 rpm model is chosen for mills and crushers that demand high starting torque. If you are unsure which speed fits, describe the machine and we will settle it together.

Why a cast-iron frame

In the 55 kW class the frame material is not up for debate. Cast iron absorbs the vibration of shock loads like crushers and mills, holds coupling or pulley alignment more steadily and resists external impact. DRG's models at this power come with IP55 protection, class F insulation and a 400/690 V (Δ/Y) connection.

Starting is not an afterthought

Throwing a 55 kW electric motor straight onto the mains strains both the supply and the mechanics; inrush current climbs to several times the rated value. In this class a star-delta or soft starter is usually planned. Which one fits depends on the load and how often it starts. Wiring and panel work must be done by qualified electrical personnel; isolate the supply and verify it is dead. To size the cable correctly our motor cable size calculator and motor current chart help.

What to settle on the order

Four facts are enough for a fast supply: power (55 kW), speed (or pole count), mounting type (B3 foot or B5/B35 flange) and your plant voltage. A replacement is even easier: read the nameplate of the existing unit and send us the values, and the right model is set in one go. Add the shaft diameter and flange hole and you avoid surprises on coupling fit.

You can review every power and speed option in the online electric motor shop.

Click to see the current 55 kW electric motor price and start your orderSEE PRICES

Frequently asked questions

How quickly is a 55 kW electric motor delivered

Once the unit is ready it ships fast from the İzmir base; the time depends on your province and carrier load. Instead of a fixed day promise, we share the current shipping status clearly when we confirm the order. For a rush job, stating the speed and mounting type up front shortens the process.

Can I start it direct-on-line at this power

For most applications it is not advised. In the 55 kW class a star-delta or soft starter is planned to limit inrush current. The right method depends on the load and start frequency; we assess it together when the panel is built.

I want the same as my old electric motor

The soundest route is to read the nameplate of the old unit. Send us the power, speed, voltage and connection values on it, plus the mounting type and shaft diameter. Sending a nameplate photo over WhatsApp speeds things up.

Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp

Electric Motors Related to This Topic — Models and Current Prices

Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.

ALL MODELS AND DETAILS IN THE ONLINE SHOP →