The 5.5 kW (7.5 HP) three-phase asynchronous electric motor is one of the ratings that form the backbone of mid-size pump, compressor and conveyor lines. DRG Motor keeps it ready in three speeds (3000, 1500, 1000 rpm) and two housings (aluminium, cast iron), and ships it fast from its İzmir base to anywhere in Türkiye.
DRG Motor is a manufacturer, supplier and seller of electric motors. You can pick the 5.5 kW models by power and speed in the online electric motor shop, and see every variant of this rating side by side in the three-phase asynchronous electric motors category.
Why is 5.5 kW so well suited to ready dispatch?
How fast a rating can ship depends on how common it is in the field, and 5.5 kW sits right at that point. Booster sets, screw and piston compressors, mid-size fans, screens and vibratory feeders, dough and mixing machines, woodworking benches — the audience for this class is wide. When demand is steady, keeping the standard speed and housing combinations on hand simply makes sense.
In practice we see this: when renewing a failed unit, most users do not start a project from scratch; they know the power and speed their machine needs. At a standard value like 5.5 kW, picking the right speed and housing is enough. That is what makes the "order today, dispatch quickly" cycle work.
Three speeds, three characters: 3000 / 1500 / 1000 rpm
The same 5.5 kW label comes in three speeds, set by the number of poles. The power stays fixed, but the speed-torque balance at the shaft changes completely:
- 2 poles / ~3000 rpm — High speed, relatively low torque. Suited to centrifugal pumps and high-speed compressors.
- 4 poles / ~1500 rpm — The meeting point of general drives. Fans, conveyors and most machines gather here; it is the most asked speed.
- 6 poles / ~1000 rpm — Low speed, high torque, for slow, hard-starting loads.
For a rough torque figure, T = 9550 · P / n is enough: at 5.5 kW, 3000 rpm gives about 17.5 Nm, 1500 rpm about 35 Nm and 1000 rpm about 52.5 Nm. The power is the same, yet torque at the shaft clearly rises as speed falls; your machine sets the choice.
Lower speed means a larger frame
A detail stands out at 5.5 kW: as speed drops, the IEC frame grows. The 3000 and 1500 rpm models are frame 132S, while the 1000 rpm model moves up to 132M. This affects weight, foot holes and overall layout. At 1500 rpm there is also a compact alternative: a model that fits the same 5.5 kW into a smaller 112M frame, useful in tight panels and space-limited mounts.
| Model | Speed | Frame | Shaft (D×E) |
|---|---|---|---|
| DRG DRG-132S1-2 | 3000 rpm | IEC 132S | 38x80 mm |
| DRG DRG-132S-4 | 1500 rpm | IEC 132S | 38x80 mm |
| DRG DRG-112M-4K | 1500 rpm | IEC 112M | 28x60 mm |
| DRG DRG-132M2-6 | 1000 rpm | IEC 132M | 38x80 mm |
If you are unsure which frame fits your spot, take the dimensions of the old unit or make a first match with our electric motor calculator.
Click to see current electric motor prices and order nowSEE PRICES →
Voltage and 400 V current: delta (Δ) at 5.5 kW
Here is a critical difference from smaller ratings. The 5.5 kW models are wired 400/690 V (Δ at 400 V, Y at 690 V). On the common 400 V three-phase supply this electric motor connects in delta (Δ); the star (Y) connection is for a 690 V supply. This is the exact opposite of the smaller 230/400 V motors, and mixing them up leads straight to failure.
The rated current at 400 V varies with speed: about 10.1 A at 3000 rpm, 10.7 A at 1500 rpm and 12.0 A at 1000 rpm. These are the starting point for thermal relay setting and cable sizing; always set the final value to the motor nameplate. Do not work under live power and leave the connection to authorised electrical staff. Our cable size calculator and motor current chart guide this step.
Standard 132S or compact 112M?
At 1500 rpm and 5.5 kW there are two paths. The standard 132S frame is the classic choice: a larger shaft (38×80 mm), plenty of cooling surface, common flange and foot dimensions. The compact 112M frame fits the same power into a smaller case with a 28×60 mm shaft; it is chosen when space is tight or weight matters. Because the shaft size differs, size the coupling and pulley accordingly.
Aluminium or cast iron?
We offer 5.5 kW in two housing materials; the electrical values are identical, the difference is purely mechanical:
- Aluminium housing (such as DRG 132S-4 aluminium): Light, easy to carry and mount. Suited where the motor moves often and vibration is not critical.
- Cast-iron housing (such as DRG 132S-4 cast iron): Heavier, more resistant to impact and vibration. For fixed industrial installs and harsh environments.
Shaft and mounting dimensions are the same in both housings, so when renewing an existing machine you can choose the material freely to suit your environment.
How fast warehouse dispatch works
DRG Motor is based in İzmir and ships fast by cargo to all of Türkiye, including that city. As standard speed and housing options at a common rating like 5.5 kW are kept ready, the time between order confirmation and dispatch is short. We reach İstanbul, Bursa, Kocaeli, Ankara, Konya or any province of Anatolia with the same approach, in a short time.
For a firm delivery day, just send us your model and province; we plan the right option and the fastest shipping route together. Whether it is an urgent breakdown replacement, a single machine drive or a small multi-item order, the process runs through the same channel.
Pinning down the right 5.5 kW model quickly
Four pieces of information are enough to base the order on a solid choice:
- Speed: the speed your machine needs (3000, 1500 or 1000 rpm).
- Housing: aluminium or cast iron; the compact 112M option where space is tight.
- Mounting and shaft: foot (B3), flange (B5/B14) or combined, plus shaft diameter.
- Voltage: your site supply (commonly 400 V three-phase → delta connection).
With these four, you can select the right model in the electric motor shop and complete the order, and ask us wherever you are unsure. If you are renewing an existing electric motor, the most practical way is to send us the old unit’s nameplate.
Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp
Browse the current options and prices for your 5.5 kW electric motor in the shop.SEE PRICES
Frequently asked questions
How many HP is 5.5 kW?
5.5 kW is about 7.5 HP (1 HP ≈ 0.746 kW). Buyers looking for a "7.5 HP electric motor" are usually pointed to this power class too.
How is a 5.5 kW electric motor connected at 400 V?
As these models are 400/690 V, they connect in delta (Δ) on a 400 V three-phase supply; star (Y) is for 690 V. Always make the connection by reading the nameplate and with authorised staff; do not work under live power.
Why is the same 5.5 kW offered in a small and a large frame?
At 1500 rpm both the standard 132S and the compact 112M are offered. Both deliver 5.5 kW; 132S gives a larger shaft and roomy layout, 112M a small case for tight spaces. Your spot and shaft size set the choice.
How long does delivery take?
DRG Motor is based in İzmir and ships fast by cargo across Türkiye. As 5.5 kW is a common rating, standard options leave quickly; for precise details just send us your model and province.
Electric Motors Related to This Topic — Models and Current Prices
Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.
5.5 kW Three-Phase Motor 3000 rpm – DRG-132S1-2 Aluminium
- 5.5 kW · 3000 rpm (2 poles)
- Aluminium frame · IEC 132S
- Shaft: 38 × 80 mm
5.5 kW Three-Phase Motor 1500 rpm – DRG-132S-4 Aluminium
- 5.5 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 132S
- Shaft: 38 × 80 mm
5.5 kW Compact Three-Phase Motor 1500 rpm – DRG-112M-4K Aluminium
- 5.5 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 112M
- Shaft: 28 × 60 mm
5.5 kW Three-Phase Motor 1000 rpm – DRG-132M2-6 Aluminium
- 5.5 kW · 1000 rpm (6 poles)
- Aluminium frame · IEC 132M
- Shaft: 38 × 80 mm
5.5 kW Three-Phase Motor 3000 rpm – DRG-132S1-2 Cast Iron
- 5.5 kW · 3000 rpm (2 poles)
- Cast iron frame · IEC 132S
- Shaft: 38 × 80 mm
5.5 kW Three-Phase Motor 1500 rpm – DRG-132S-4 Cast Iron
- 5.5 kW · 1500 rpm (4 poles)
- Cast iron frame · IEC 132S
- Shaft: 38 × 80 mm
















