The 5.5 kW three-phase asynchronous electric motor is the workhorse of the 7.5 HP class: screw and piston compressors, booster pumps and hydrophores, large extraction and pressure fans, mill and crusher drives — lines where the load has become serious. DRG Motor keeps this rating ready in 3000, 1500 and 1000 rpm, in aluminium and cast-iron housings, and ships it fast from İzmir to every province of Türkiye.

5.5 kW grey DRG three-phase asynchronous electric motor for fast delivery and supply

DRG Motor is a manufacturer, supplier and seller of electric motors. You can pick the 5.5 kW electric motor by speed and housing in the online electric motor shop, and view the whole range in the three-phase asynchronous electric motors category.

Where does 5.5 kW come in?

This is the class where the thermal relay in the panel is taken seriously. Machines that strain on start-up, run loaded and turn all day sit in this band. In the field it shows up most on:

  • Screw and piston air compressors, compressed-air lines
  • Hydrophores, deep-well and transfer pumps, pressurisation sets
  • Large extractor and pressure fans, dust collection and ventilation units
  • Feed grinders, hammer mills, pellet and small crusher drives
  • Mid-size conveyors, elevators and agitator-mixer systems
  • Stone and woodworking benches, saws and planers that need high torque

The common thread: the load is not small and the start is usually tough. Here 5.5 kW gives both enough torque and a stable heat balance in continuous running. But "5.5 kW" alone does not complete the order — the same rating comes in three speeds and two housings, and your machine decides which.

Speed choice sets the job

Speed is set by the number of poles; the power stays the same but torque and character change. For the same 5.5 kW the three standard speeds differ like this:

ModelSpeedApprox. torqueRated current (400 V)
DRG DRG-132S1-23000 rpm (2 poles)17.5 Nm10.1 A
DRG DRG-132S-41500 rpm (4 poles)35.0 Nm10.7 A
DRG DRG-132M2-61000 rpm (6 poles)52.5 Nm12.0 A

Torque is computed as T=9550·P/n; as speed drops, torque rises. In practice: 3000 rpm means high speed and low torque, good for compressors and high-flow pumps. 1500 rpm is the most popular balanced choice, where most jobs sit. 1000 rpm turns slowly with high torque, suiting heavy-starting mills, crushers and agitators. The 1000 rpm model draws slightly more current, so account for that when setting protection.

If unsure which speed fits, describe the machine and load type in a few lines and we will decide together. For a first idea, our electric motor calculator also helps.

Click to see current electric motor prices and order nowSEE PRICES →

Compact housing: same power, shorter frame

We offer 5.5 kW at 1500 rpm in two frame sizes. The standard DRG 132S-4 is the classic IEC 132 frame with a 38 mm shaft. The DRG 112M-4K compact fits the same 5.5 kW into a smaller IEC 112 frame with a 28 mm shaft. Where space is tight, or a retrofit must match the footprint of an existing 4 kW motor, this compact frame saves the job.

One caution when choosing: the compact frame has a different shaft diameter and frame height. Verify your coupling, pulley or flange dimensions accordingly, or the mating part may not fit.

Aluminium or cast iron?

We supply 5.5 kW in two materials; the electrical values are identical, the difference is mechanical. Aluminium housing is lighter, easy to carry and mount — handy on equipment that moves or sits on an upper floor. Cast-iron housing is heavier and tougher, preferred for compressors, crushers and other fixed installs with high vibration, impact and dusty-damp conditions.

Shaft and mounting dimensions match exactly between the two materials at the same frame. When replacing the electric motor on an existing machine, you can switch the housing material without breaking the fit.

400/690 V connection and current

As 5.5 kW is in the 4 kW-and-above class, it is wound 400/690 V (Δ/Y). On the common 400 V three-phase supply it connects in delta (Δ); on a 690 V line it runs in star (Y). Its rated current at 400 V varies with speed: about 10.1 A at 3000 rpm, 10.7 A at 1500 rpm and 12.0 A at 1000 rpm. These values are the starting point for thermal relay setting and cable sizing — and remember the start-up current is a multiple of the rated current.

Always size cable and protection to the real value on the motor nameplate. Make the connection after cutting power and verifying de-energisation, with authorised electrical staff. Our cable size calculator and motor current chart do the job here.

Fast delivery and supply from İzmir

DRG Motor is based in İzmir and ships fast by cargo to all of Türkiye, including that city. As 5.5 kW is a common rating, standard speed and housing options are kept ready, which shortens the time from order to dispatch. We reach İstanbul, Bursa, Ankara, Kocaeli or any industrial region of Anatolia with the same approach, in a short time.

The job is often urgent: a compressor has stopped, the line is waiting, an electric motor is needed at once. The most practical way is to send us the nameplate of the stopped motor — once power, speed and connection are clear, we plan the right model and the fastest delivery route together. A single unit or project-based bulk supply, both work.

Four things to settle before ordering

For the right 5.5 kW model, these four are enough:

  1. Speed: the speed your machine needs (3000, 1500 or 1000 rpm).
  2. Housing: aluminium or cast iron; standard or compact.
  3. Mounting and shaft: foot (B3), flange (B5/B14) or combined; shaft diameter.
  4. Voltage: your site supply (commonly 400 V three-phase).

With these four you can select the right model in the electric motor shop and complete the order, and ask us wherever you are unsure.

Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp

See the 5.5 kW electric motor that fits your machine, with speed and housing options, in the shop.SEE PRICES

Frequently asked questions

How many HP is 5.5 kW?

5.5 kW is about 7.5 HP (1 HP ≈ 0.746 kW). Buyers looking for a "7.5 HP electric motor" are pointed to this power class too.

Is 5.5 kW suitable for a compressor?

Most mid-size screw and piston compressors run in this range, usually at 3000 or 1500 rpm. The exact choice depends on the compressor’s air flow and pressure; to be sure, share the compressor nameplate and we will confirm together.

What is the difference between standard and compact housing?

Both deliver 5.5 kW. The standard 132 frame has a 38 mm shaft and is larger; the compact 112 frame has a 28 mm shaft and is one size smaller. Compact is chosen where space is tight or a small frame is wanted; always verify the shaft and mounting dimensions.

How long does delivery take?

DRG Motor is based in İzmir and ships fast across Türkiye. As 5.5 kW is a common rating, standard options leave quickly; for precise delivery details just send us your model and province.

Electric Motors Related to This Topic — Models and Current Prices

Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.

ALL MODELS AND DETAILS IN THE ONLINE SHOP →