The 45 kW three-phase asynchronous electric motor is one of the backbone ratings of heavy industry; being able to get it ready for delivery the moment you need it often means production never stops. DRG Motor offers this rating in 3000, 1500 and 1000 rpm options with a cast-iron housing, shipping it fast from İzmir to all of Türkiye.

45 kW grey cast-iron DRG three-phase asynchronous electric motor, ready delivery and fast supply

DRG Motor is a manufacturer, supplier and seller of electric motors. You can pick the 45 kW electric motor that best fits your need by power and speed in the online electric motor shop, and review the whole class together in the three-phase asynchronous electric motors category.

Where does a 45 kW electric motor work?

This rating has left the small-drive world entirely. In the field you meet a 45 kW electric motor most often in front of screw compressor sets, stone and marble cutting-crushing lines, high-flow irrigation and booster pumps, extruders and granulators, large extraction fans and dust-collection systems, and heavy conveyor or crane drives. They share the same traits: the load is hard, the start is tough, and the motor stays under load all day.

With such a load, reducing the choice to a single figure is misleading. 45 kW is built at three different speeds at once, and which one fits depends on the speed and torque your driven machine asks for.

What does ready delivery mean, and how does it work?

At heavy ratings the most-asked question is lead time. When a compressor or pump stops, the plant cannot wait, so getting the 45 kW electric motor ready for delivery is the first thing the field asks about. DRG Motor's İzmir-based setup steps in here: the moment the order is confirmed, dispatch is prepared, the shipment leaves İzmir and reaches your address by carrier.

It would be wrong to promise more than that. Delivery time depends on the chosen speed, the frame size and the shipping distance. The right approach is to confirm the model over WhatsApp or by quote, then settle the dispatch day together — so you don't wait twice because of the wrong power or speed.

Click to see current electric motor prices and order nowSEE PRICES →

Three speeds, three characters

At 45 kW, three DRG models deliver the same power at different speeds. In the table below each model code links straight to its product page; the currents are for 400 V.

ModelSpeedCurrent (400 V)Shaft dia. × length
DRG-225M-2 (2-pole)3000 rpm76.8 A55x110 mm
DRG-225M-4 (4-pole)1500 rpm80.2 A60x140 mm
DRG-280S-6 (6-pole)1000 rpm81.6 A75x140 mm

The 2-pole 3000 rpm model suits high-speed compressors and some pumps; the 4-pole 1500 rpm fits conveyors, fans and general drives; the 6-pole 1000 rpm is chosen for low-speed, high-torque work such as mills and heavy crushers. If you are unsure which speed fits, check the power-current match with the motor current chart and enter your application into the electric motor calculator.

Why is the housing cast iron at 45 kW?

DRG's aluminium range reaches up to 11 kW; 45 kW is well above that limit. So at this rating the electric motor comes with a cast-iron (grey iron) housing, which is not a preference but the natural result of scale. Cast iron gives heavy-industry installation what it needs: high resistance to impact and vibration, a steady seat at the coupling and belt-pulley drive, and a solid foot-and-shaft structure that holds its dimensions for years.

Shaft, coupling and mounting

In the 45 kW class the shaft diameter changes with speed: 55x110 mm at 2 poles, 60x140 mm at 4 poles, and 75x140 mm at 6 poles with the 280 frame. If you are replacing an old motor, the coupling, pulley and base holes fit these dimensions, so knowing the current shaft diameter and mounting type (B3 foot, B5 flange) before ordering saves time.

What to settle when ordering

From a supplier's view, the most common mix-up is getting the power right but skipping the speed or mounting type. On a 45 kW electric motor, settling these four points up front prevents wrong shipments and repeated waiting:

  • Speed: 3000, 1500 or 1000 rpm — the speed your machine needs.
  • Mounting type: foot (B3), flange (B5) or foot-and-flange together.
  • Shaft diameter: the coupling or pulley fits this dimension.
  • Voltage connection: 400/690 V (Δ/Y); delta or star to suit your panel.

The most practical route: photograph the nameplate of your current motor and send it. In field terms, the power-speed-housing line on that plate almost settles the right model on its own.

Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp

Frequently asked questions

How many horsepower is a 45 kW electric motor?

It is about 60 HP (1 HP ≈ 0.746 kW). The catalogue lists both kW and HP; ordering by kW avoids confusion.

Which speed should I choose?

It depends on the speed your driven machine needs. Use 3000 rpm for high-speed work, 1500 rpm for general drives, and 1000 rpm where low speed and high torque are required. If unsure, describe the application and we will decide together.

Which provinces do you deliver to?

DRG Motor is based in İzmir and delivers fast to all of Türkiye, that province included. The shipment leaves İzmir; the exact day is confirmed by model and distance.

Does it run on voltages other than 400 V?

At this rating the connection is 400/690 V (Δ/Y): delta on a 400 V supply, star on a 690 V supply. If a different voltage is involved, state it before ordering.

Click to see the current price of the 45 kW electric motor and request a quoteSEE PRICES

Electric Motors Related to This Topic — Models and Current Prices

Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.

ALL MODELS AND DETAILS IN THE ONLINE SHOP →