The 45 kW (about 60 HP) three-phase asynchronous electric motor sits in the upper-middle tier of heavy industry. DRG Motor supplies this rating in 3000, 1500 and 1000 rpm options with a cast-iron housing, and ships it fast from İzmir across Türkiye. Once the topic lands, the first question is speed, because 45 kW is not one motor but three.

45 kW grey cast-iron DRG three-phase asynchronous electric motor for fast delivery and supply

DRG Motor is a manufacturer, supplier and seller of electric motors. You can pick the 45 kW electric motor by power and speed in the online electric motor shop, and see the whole class together in the three-phase asynchronous electric motors category.

Three speeds side by side: the 45 kW table

At this rating the trick is to read the table first. 45 kW comes in three standard speeds by pole count; the 3000 and 1500 rpm models are on a 225 frame, while the 1000 rpm model is one size larger, on a 280 frame. Each model code opens its product page.

ModelSpeedRated current (400 V)Shaft (D×E)
DRG DRG-225M-23000 rpm (2-pole)76.8 A55x110 mm
DRG DRG-225M-41500 rpm (4-pole)80.2 A60x140 mm
DRG DRG-280S-61000 rpm (6-pole)81.6 A75x140 mm

Same power, different job. On the 3000 rpm side the speed is high and shaft torque relatively low; move down to 1000 rpm and torque grows while speed falls. In short, T = 9550 · P / n. So "just get me 45 kW" is not enough; you need the speed your machine asks for.

Click to see current electric motor prices and order nowSEE PRICES →

Where does a 45 kW electric motor come in?

This class belongs on a plant’s main drives. In the field you mostly meet a 45 kW electric motor in front of:

  • main-line screw and piston compressors,
  • large jaw, cone and impact stone crushers,
  • high-flow booster and irrigation pump stations,
  • plastic extruders, granulators and crushing lines,
  • dough, feed and chemical mixing agitators,
  • large blowers, extraction and cooling-tower fans,
  • heavy conveyors, belt haulers and bucket elevators.

They share one problem: the load is heavy, the start is hard, the running hours are long. With such a load, squeezing the motor into a single number causes trouble; first the machine’s character, then speed and mounting.

Why is the housing cast iron here?

DRG’s aluminium range reaches up to 11 kW. As 45 kW is well above that, the electric motor at this rating comes only with a cast-iron housing; this is not a matter of preference but what the scale demands.

Cast iron gives heavy industry exactly what it looks for: high resistance to impact and vibration, a steady seat at the coupling and belt-pulley line, and a solid foot-and-shaft structure that keeps its dimensions for years. The weight itself turns into an advantage; bolted to the floor, the housing damps its own sway. Yet that same weight makes handling harder: a 45 kW electric motor needs a forklift and a pallet. Settling the lifting means at the delivery point up front saves time on site.

400 V connection and starting

The 45 kW models are wound 400/690 V (Δ/Y); they connect in delta (Δ) on the common 400 V three-phase supply. Their rated current at 400 V sits between 77 and 82 A with speed. Direct-on-line starting strains the supply seriously at this size, so a star-delta or soft starter is preferred in almost every install.

Pick the thermal relay, contactor and cable cross-section to the real value on the motor nameplate. Do not work under live power, verify isolation, and leave the connection to authorised electrical staff. Our cable size calculator and motor current chart give a starting point; you can sketch the power-speed balance with the electric motor calculator.

Fast delivery from İzmir and project supply

DRG Motor is based in İzmir and delivers fast by cargo to all of Türkiye, that city included. As 45 kW is a common main-drive rating, standard speed and housing options are kept ready, which shortens the time between order and dispatch. We reach your plant in İstanbul, Kocaeli, Bursa, Ankara, Konya or any other province with the same approach.

There are two typical cases. One is replacing a failed electric motor urgently to save a stopped line; the other is planning several motors together for a new investment. We handle both through the same channel. For project-based supply, share the quantity, speed and delivery schedule in advance and we shape the shipment accordingly. Given the heavy housing, agreeing on palletised shipping and the unloading means up front avoids surprises.

Four things to settle when ordering

Four facts are enough to land on the right 45 kW model:

  1. Speed: the speed your machine needs (3000, 1500 or 1000 rpm).
  2. Mounting and shaft: foot (B3), flange (B5) or combined; shaft diameter 55, 60 or 75 mm by model.
  3. Voltage and starting: your site supply (commonly 400 V three-phase) and the start method.
  4. Application: which machine it turns and how hard the start is.

With these four you can select the right model in the electric motor shop and complete the order. If you are replacing an existing motor, the most practical way is to photograph the old nameplate and send it to us; where you hesitate, we look together.

Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp

See the current options and price for your 45 kW electric motor in the shop.SEE PRICES

Frequently asked questions

How many HP is 45 kW?

45 kW is about 60 HP (1 HP ≈ 0.746 kW). Buyers looking for a "60 HP electric motor" are usually pointed to this power class too.

Is there an aluminium housing at 45 kW?

No. The aluminium range is built up to 11 kW; as 45 kW is well above that it comes with a cast-iron housing, which also provides the strength a heavy load needs.

3000, 1500 or 1000 rpm, which one?

Your machine decides: 3000 rpm for fast pumps and compressors, 1500 rpm for general drives, 1000 rpm for hard-starting crushers and mills. If unsure, describe your application or check the calculator.

How long does delivery take?

DRG Motor is based in İzmir and ships fast by cargo across Türkiye. As 45 kW is a common rating, standard options leave quickly; for precise details just send us your model and province.

Electric Motors Related to This Topic — Models and Current Prices

Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.

ALL MODELS AND DETAILS IN THE ONLINE SHOP →