The 4 kW three-phase asynchronous electric motor is the backbone of mid-power work — from workshop benches and pump sets to fans and conveyors — and is about 5.5 HP. DRG Motor keeps this rating ready in three speeds (3000, 1500, 1000 rpm) and two housings (aluminium, cast iron), shipping it fast from its İzmir base to anywhere in Türkiye. Here we open up both the delivery and the technical side.
DRG Motor is a manufacturer, supplier and seller of electric motors. You can pick a 4 kW electric motor by power and speed in the online electric motor shop, and review the options at this rating together in the three-phase asynchronous electric motors category.
What makes 4 kW suited to ready dispatch?
In the field we often hear “I need a 4 kW — can it go out today?” This rating sits at a practical midpoint: it does more than a single-phase line can carry, yet it does not bring the weight of a heavy-industry build. So demand is steady and its standard configurations are well defined.
Steady demand also eases delivery. Because the most-asked speeds and housings at 4 kW are kept ready, the time from order to dispatch is short. When a machine stops, a spare in the same power class at the right speed is usually enough — which is why 4 kW stands out when someone says “urgent”.
At 4 kW the connection changes: 400/690 V (Δ/Y)
This is the most overlooked technical point. DRG models of 3 kW and below have a 230/400 V winding, while 4 kW and above come with a 400/690 V (Δ/Y) winding. This small-looking difference reverses the bridge layout in the panel.
In practice: on the common 400 V three-phase supply in Türkiye this electric motor connects in delta (Δ) — because 400 V is the motor’s delta voltage. The star (Y) side is for 690 V lines. A fitter used to wiring a 3 kW motor in star at 400 V may, by reflex, set the bridges the wrong way on a 4 kW. Settling this at the order stage saves minutes at the panel.
One more detail: since it runs in delta at 400 V, this rating also lends itself to star-delta starting on suitable lines. Installations that want to cut the inrush current plan for this from the start.
Click to see current electric motor prices and order nowSEE PRICES →
Three different 4 kW motors: speed, housing and current
Even with the same “4 kW” on the plate, three characters emerge by pole count. The power is fixed; what changes is the speed-torque balance at the output. As speed falls, torque rises:
- 2 poles / ~3000 rpm: high speed, low torque (about 12.7 Nm) — fast-turning loads like centrifugal pumps and small compressors.
- 4 poles / ~1500 rpm: the most chosen balance (about 25.5 Nm) — fans, conveyors, general drives.
- 6 poles / ~1000 rpm: low speed, high torque (about 38.2 Nm) — heavy, slow-starting loads.
Torque is roughly T = 9550 · P / n; the same 4 kW gives nearly twice the torque at 1000 rpm as at 1500 rpm. Rated current at 400 V also rises slightly with speed. A summary of the six models, each code linking to its product page:
| Model | Poles / speed | Shaft (D×E) | Rated current (400 V) |
|---|---|---|---|
| DRG DRG-112M-2 | 2 poles / 3000 rpm | 28×60 mm | 7.45 A |
| DRG DRG-112M-4 | 4 poles / 1500 rpm | 28×60 mm | 7.95 A |
| DRG DRG-132M1-6 | 6 poles / 1000 rpm | 38×80 mm | 8.99 A |
| DRG DRG-112M-2 | 2 poles / 3000 rpm | 28×60 mm | 7.45 A |
| DRG DRG-112M-4 | 4 poles / 1500 rpm | 28×60 mm | 7.95 A |
| DRG DRG-132M1-6 | 6 poles / 1000 rpm | 38×80 mm | 8.99 A |
If you are unsure which speed fits, describe the machine in a few words and we will choose by load type together. For a first idea, our electric motor calculator helps.
112M or 132M? Mind the housing and shaft
4 kW has a important detail on the coupling and pulley side. The 2- and 4-pole models sit in a 112M frame with a 28×60 mm shaft. The 6-pole model grows to a 132M frame with a 38×80 mm shaft. So at the same 4 kW, choosing the low speed changes both the outside size and the shaft diameter.
A fitter who misses this finds, when the 1000 rpm model arrives, that the old 28 mm coupling will not seat on the shaft. So state the speed, the mounting type (foot B3, flange B5/B14) and the shaft diameter from the start. Aluminium housing is easy to carry and mount; cast iron sits more solidly in vibrating, shock-prone settings. Both share the same electrical values; the choice follows the application.
Dispatch from İzmir, across all of Türkiye
DRG Motor is based in İzmir and ships fast by cargo to all of Türkiye, that city included. As 4 kW sees high daily demand, standard speed and housing options are kept ready, which speeds up dispatch when someone says “I need it today”. A metal workshop in Bursa, a textile line in Gaziantep or a water set in Samsun is reached with the same approach, in a short time.
If your machine has stopped, every lost hour weighs the most. Tell us the need and we will plan the right model and the fastest route together. Bulk purchase for several lines and project-based supply run through the same channel.
Four points to settle before ordering
Getting the right 4 kW electric motor first time comes down to knowing these four:
- Speed: the speed your machine needs (3000, 1500 or 1000 rpm).
- Housing and shaft: aluminium or cast iron; 112M (28 mm) or 132M (38 mm).
- Mounting: foot (B3), flange (B5/B14) or combined.
- Supply: the site voltage (mostly 400 V three-phase → delta connection).
With these four you can select the right model in the electric motor shop and complete the order. The most practical method is to photograph the nameplate of the electric motor you are replacing and send it to us; we read the power, speed, housing and shaft size and settle the suitable DRG model together.
Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp
See the current options and prices of the 4 kW electric motor that fits your need in the shop.SEE PRICES
Frequently asked questions
How many HP is 4 kW?
4 kW is about 5.5 HP (1 HP ≈ 0.746 kW; 4 ÷ 0.746 ≈ 5.36). Buyers looking for a “5.5 HP electric motor” are pointed to this power class.
How does a 4 kW motor connect to 380 V?
4 kW models are wound 400/690 V (Δ/Y); on a 400 V (often called 380 V) three-phase supply they connect in delta (Δ). The star side is for 690 V lines. Set the bridges per the nameplate.
Always size cable and thermal protection to the real value on the motor nameplate. Do not work under live power, confirm isolation and leave the connection to authorised electrical staff. Our cable size calculator and motor current chart help here.
Why is the shaft thicker on the 1000 rpm model?
The 6-pole / 1000 rpm model sits in a 132M frame, so its shaft is 38×80 mm; the 2- and 4-pole models come in a 112M frame with a 28×60 mm shaft. Choose couplings and pulleys accordingly.
Aluminium or cast iron?
Both give the same electrical values. Pick aluminium for light weight and easy mounting, cast iron for ruggedness in vibrating, shock-prone settings.
Electric Motors Related to This Topic — Models and Current Prices
Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.
4 kW Three-Phase Motor 3000 rpm – DRG-112M-2 Aluminium
- 4 kW · 3000 rpm (2 poles)
- Aluminium frame · IEC 112M
- Shaft: 28 × 60 mm
4 kW Three-Phase Motor 1500 rpm – DRG-112M-4 Aluminium
- 4 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 112M
- Shaft: 28 × 60 mm
4 kW Three-Phase Motor 1000 rpm – DRG-132M1-6 Aluminium
- 4 kW · 1000 rpm (6 poles)
- Aluminium frame · IEC 132M
- Shaft: 38 × 80 mm
4 kW Three-Phase Motor 3000 rpm – DRG-112M-2 Cast Iron
- 4 kW · 3000 rpm (2 poles)
- Cast iron frame · IEC 112M
- Shaft: 28 × 60 mm
4 kW Three-Phase Motor 1500 rpm – DRG-112M-4 Cast Iron
- 4 kW · 1500 rpm (4 poles)
- Cast iron frame · IEC 112M
- Shaft: 28 × 60 mm
4 kW Three-Phase Motor 1000 rpm – DRG-132M1-6 Cast Iron
- 4 kW · 1000 rpm (6 poles)
- Cast iron frame · IEC 132M
- Shaft: 38 × 80 mm
















