DRG Motor keeps the 37 kW (50 HP) three-phase asynchronous electric motor ready in a cast-iron housing, in 3000, 1500 and 1000 rpm options, and ships it fast from İzmir to anywhere in Türkiye. At this rating you are on the heavy side of the catalogue: the choice is driven not by the kilowatts but by the speed the machine needs and the current at the panel.
DRG Motor is a manufacturer, supplier and seller of electric motors. You can choose the 37 kW electric motor by power and speed in the online electric motor shop, and review the models in this class together in the three-phase asynchronous electric motors category.
What lines does 37 kW drive?
This rating is squarely main-drive work. In the field we meet 37 kW mostly on large screw compressor sets, high-pressure centrifugal pumps, marble and granite gang-saw and cutting benches, the feed belts of crushing and screening lines, high-flow forced-draught fans, and mill and mixer shafts. What they share is that the load turns with real inertia, and the stress on the housing at start-up is in a different league from small ratings.
So on a 37 kW order, "how many kW" is the start, not the finish. The same 37 kW comes in three speeds, three frame sizes and three shaft diameters; the machine you drive tells you the right combination.
Speed, poles and torque: 3000, 1500, 1000 rpm
Speed is set by the number of poles. With power fixed at 37 kW, torque at the shaft grows as speed falls, and the frame size and shaft diameter grow with it. For a rough first check T = 9550 · P / n is a guide; the torque figures below are approximate against synchronous speed and a little higher at the rated speed on the nameplate.
| Model | Speed / frame | Torque (approx.) | Rated current (400 V) |
|---|---|---|---|
| DRG DRG-200L2-2 | 3000 rpm · 200L | 118 Nm | 64.0 A |
| DRG DRG-225S-4 | 1500 rpm · 225S | 236 Nm | 66.1 A |
| DRG DRG-250M-6 | 1000 rpm · 250M | 354 Nm | 68.1 A |
The shaft diameter grows with speed too: 55×110 mm on the 3000 rpm model, 60×140 mm on the 1500 rpm one, 65×140 mm on the 1000 rpm one. So picking the speed also means picking the coupling, pulley and bearing side. Two poles is the first match for fast pumps and compressors, four poles the most-requested middle ground for general drives, six poles for hard-starting slow loads.
Click to see current electric motor prices and order nowSEE PRICES →
Cast-iron housing and the physics of 37 kW
At 37 kW the DRG range is offered only in a cast-iron (GG) housing; aluminium is not an option at this scale. The mass of cast iron steadies the machine on crushing, gang-saw and compressor lines dominated by shock starts and continuous vibration, which helps bearing life. In practice you do not decide the housing material separately; cast iron is the standard at this rating.
The weight has one more practical meaning: a 37 kW electric motor is not a one-person lift. Lowering it to the floor, seating it on the base and aligning it calls for a forklift or crane, a proper lifting eye and a two-person crew planned from the start. Clarifying the mounting type at order time (foot B3, flange B5 or combined B35) is the easiest way to avoid surprises on site.
The panel side: 400 V current and starting
The 37 kW models are wired 400/690 V (delta at 400 V, star at 690 V). On the common 400 V three-phase supply this electric motor runs in delta (Δ). This should not be confused with the 230/400 V motors at smaller ratings; a wrong connection is a leading cause of early failure in this class.
The rated current at 400 V changes with speed: about 64 A at 3000 rpm, 66.1 A at 1500 rpm and 68.1 A at 1000 rpm. These are the starting point for thermal relay setting, contactor and cable sizing. At 37 kW the starting current is a multiple of the rated current, so direct starting is usually avoided in the panel; star-delta or a soft starter is assessed separately. Always set protection and cross-section to the real value on the motor nameplate; do not work under live power, and leave connection and measurement to authorised electrical staff. Our cable size calculator and motor current chart help at this step.
Ready delivery and fast dispatch from the warehouse
DRG Motor is based in İzmir and ships fast by cargo to all of Türkiye, including that city. As standard speed options at a rating as common in heavy industry as 37 kW are kept ready in cast-iron housings, the time between order confirmation and dispatch is short. We reach İzmir, İstanbul, Bursa, Kocaeli, Ankara, Konya or any province of Anatolia with the same approach.
Logistics at this power run differently from small motors: packing, lifting points and vehicle type are planned by weight. To shorten the time on an urgent renewal of a stopped line, just send your model and province up front; we set the right speed and the fastest shipping route together.
Four points to settle before ordering
Four pieces of information are enough to base a 37 kW order on a solid choice:
- Speed: the speed your machine needs (3000, 1500 or 1000 rpm).
- Mounting and shaft: foot (B3), flange (B5) or combined; a 55×110, 60×140 or 65×140 mm shaft.
- Voltage and starting: the site supply (commonly 400 V → delta) and whether the panel uses star-delta or a soft starter.
- Delivery province: the city it goes to, for the shipping plan and lifting arrangement.
With these you can select the right model in the electric motor shop and complete the order, and ask us wherever you are unsure. If you are renewing an existing unit, the most practical way is to photograph the old electric motor’s nameplate and send it to us.
Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp
See the current options and prices for your 37 kW electric motor in the shop.SEE PRICES
Frequently asked questions
How many HP is 37 kW?
37 kW is about 50 HP (1 HP ≈ 0.746 kW). Buyers looking for a "50 HP electric motor" are pointed to this power class too.
Is a 37 kW electric motor available in aluminium?
At this rating the housing is cast iron. DRG’s aluminium range stays at smaller powers; in heavy classes like 37 kW the load calls for a cast-iron housing.
Which speed should I choose?
Your machine sets the speed: 3000 rpm for fast pumps and compressors, 1500 rpm for general drives, 1000 rpm for high-torque slow loads. If unsure, describe your application or check the electric motor calculator.
How long does delivery take?
As the standard speed options are kept ready, dispatch is quick; for a firm day just send your model and province. Because of the weight, lifting and vehicle arrangements are planned together from the start.
Electric Motors Related to This Topic — Models and Current Prices
Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.
37 kW Three-Phase Motor 3000 rpm – DRG-200L2-2 Cast Iron
- 37 kW · 3000 rpm (2 poles)
- Cast iron frame · IEC 200L
- Shaft: 55 × 110 mm
37 kW Three-Phase Motor 1500 rpm – DRG-225S-4 Cast Iron
- 37 kW · 1500 rpm (4 poles)
- Cast iron frame · IEC 225S
- Shaft: 60 × 140 mm
37 kW Three-Phase Motor 1000 rpm – DRG-250M-6 Cast Iron
- 37 kW · 1000 rpm (6 poles)
- Cast iron frame · IEC 250M
- Shaft: 65 × 140 mm













