The 37 kW (about 50 HP) three-phase asynchronous electric motor has long left workshop scale behind; it runs the main drives of heavy industry. DRG Motor prepares this rating in 3000, 1500 and 1000 rpm options with a cast-iron housing, and ships it fast from İzmir to all of Türkiye. Set the right speed for your job and we will sort out the rest together.
DRG Motor is a manufacturer, supplier and seller of electric motors. You can review the 37 kW electric motor that fits your need by power and speed in the online electric motor shop, and see the models in this class together in the three-phase asynchronous electric motors category.
What heavy jobs does a 37 kW electric motor pull?
At this rating we are no longer talking about small drives. In the field a 50 HP electric motor is most often found in front of large screw compressors, jaw and impact crushers, stone and marble cutting and crushing lines, the main screws of plastic extrusion and granulating lines, high-flow centrifugal pumps and booster sets, large extractor and scroll fans, feed and grain mills, mixers and belt-conveyor head drums.
They share one thing: the load is heavy, inertia is high and the moment of start-up is harsh. Reducing the choice to a single "37 kW" line is misleading, because the same power is built in three speeds, and which one fits depends on the speed and torque your driven machine asks for.
Speed in the 50 HP class: 3000, 1500, 1000 rpm
Speed is set by the number of poles. With the 37 kW power fixed, shaft torque rises as speed falls and the frame grows. For a rough idea T = 9550 · P / n is a guide; the torque figures below are approximate and a little higher at rated speed.
| Model | Speed / poles | Rated current (400 V) | Shaft (D×E) |
|---|---|---|---|
| DRG DRG-200L2-2 | 3000 rpm · 2-pole | 64.0 A | 55x110 mm |
| DRG DRG-225S-4 | 1500 rpm · 4-pole | 66.1 A | 60x140 mm |
| DRG DRG-250M-6 | 1000 rpm · 6-pole | 68.1 A | 65x140 mm |
As speed drops the frame grows too: the 3000 rpm model is on a 200 frame (55×110 mm shaft), the 1500 rpm model on a 225 frame (60×140 mm shaft), the 1000 rpm model on a 250 frame (65×140 mm shaft). So the speed decision is also a coupling, pulley and mounting decision. High speed usually suits fast pumps and compressors, low speed suits hard-starting crushers and mills. If you are unsure of the speed, describe your application in a few words; for a first idea, see our electric motor calculator.
Click to see current electric motor prices and order nowSEE PRICES →
Why a cast-iron housing? The scale 37 kW brings
DRG’s aluminium range reaches up to 11 kW; 37 kW is well above that limit. So at this rating the housing is cast iron (GG), and that is not a preference but the natural result of scale. Cast iron takes the vibration, heat and mechanical stress of this class more solidly; on crushing, screening and compressor lines with shock starts, the mass of the housing also steadies the machine.
There is a handling side in the field too. A 37 kW electric motor is a serious load on its own; loading and unloading needs a forklift or crane, and palletised shipping is almost the rule. Settling the lifting means at the delivery point up front makes the fitter’s job easier once on site.
The 400 V side: current, connection and starting
The 37 kW models are wound 400/690 V (Δ at 400 V, Y at 690 V). On the common 400 V three-phase supply this electric motor runs in delta (Δ); on 690 V supplies it connects in star. This should not be confused with the 230/400 V units at smaller ratings, and a wrong connection is a leading cause of trouble in this class.
The rated current at 400 V changes with speed: about 64.0 A at 3000 rpm, 66.1 A at 1500 rpm and 68.1 A at 1000 rpm. These are the starting point for thermal relay setting, contactor and cable sizing. At 37 kW direct-on-line starting strains the supply hard, so a star-delta or soft starter is preferred in most installs. Always set protection and cross-section to the real value on the motor nameplate; do not work under live power, verify isolation, and leave connection and measurement to authorised electrical staff. Our cable size calculator and motor current chart give a starting point at this step.
Fast delivery from İzmir and project supply
DRG Motor is based in İzmir and ships fast by cargo to all of Türkiye, that city included. As 37 kW is a common industrial rating, standard speed and housing options are kept ready, which shortens the time between order confirmation and dispatch. We reach your plant in İstanbul, Bursa, Kocaeli, Ankara, Gaziantep or any province of Anatolia with the same approach, in a short time.
We see two typical cases: the urgent renewal of a stopped line, and bulk purchasing for a new facility. We handle both through the same channel. For project-based supply, share the quantity, speed and delivery schedule in advance and we plan the shipment to suit you. Given the heavy housing, agreeing on palletised shipping and the unloading means up front avoids surprises on delivery.
Four points to settle when ordering
Four facts are enough to base a 37 kW electric motor order on a solid choice:
- Speed: the speed your machine needs (3000, 1500 or 1000 rpm).
- Mounting and shaft: foot (B3), flange (B5) or combined; a 55×110, 60×140 or 65×140 mm shaft.
- Voltage and starting: your site supply (commonly 400 V three-phase → delta) and whether the panel uses star-delta or a soft starter.
- Application: which machine it drives, and whether the load is heavy and hard-starting.
With these four you can select the right model in the electric motor shop and request a quote, and ask us wherever you are unsure. If you are renewing an existing electric motor, the most practical way is to photograph the old nameplate and send it to us; we read power, speed and connection type straight from it.
Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp
Ask for the current options and your quote for a 37 kW electric motor in the shop.SEE PRICES
Frequently asked questions
How many HP is 37 kW?
37 kW is about 50 HP (1 HP ≈ 0.746 kW). Buyers looking for a "50 HP electric motor" are usually pointed to this power class too.
Is a 37 kW electric motor available in aluminium?
At this rating the housing is cast iron. DRG’s aluminium range is built up to 11 kW; as 37 kW is above that limit, the load calls for a cast-iron housing.
Which speed should I choose?
Your machine sets the speed: 3000 rpm for fast pumps and compressors, 1500 rpm for general drives, 1000 rpm for hard-starting crushers and mills. If unsure, describe your application or check the calculator.
How does delivery proceed?
DRG Motor is based in İzmir and ships fast by cargo across Türkiye. As 37 kW is a common rating, standard options leave quickly; for precise delivery details just send us your model and province. Given the heavy housing, we agree on palletised shipping and the unloading means in advance.
Electric Motors Related to This Topic — Models and Current Prices
Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.
37 kW Three-Phase Motor 3000 rpm – DRG-200L2-2 Cast Iron
- 37 kW · 3000 rpm (2 poles)
- Cast iron frame · IEC 200L
- Shaft: 55 × 110 mm
37 kW Three-Phase Motor 1500 rpm – DRG-225S-4 Cast Iron
- 37 kW · 1500 rpm (4 poles)
- Cast iron frame · IEC 225S
- Shaft: 60 × 140 mm
37 kW Three-Phase Motor 1000 rpm – DRG-250M-6 Cast Iron
- 37 kW · 1000 rpm (6 poles)
- Cast iron frame · IEC 250M
- Shaft: 65 × 140 mm













