The 22 kW (about 30 HP) three-phase asynchronous electric motor is kept ready in DRG Motor’s cast-iron range in three speeds — 3000, 1500 and 1000 rpm — and ships quickly from İzmir to anywhere in Türkiye. At this rating the job is decided not by the kilowatts alone, but by the speed your machine needs, the shaft diameter and the current on the 400 V side.
DRG Motor is a manufacturer, supplier and seller of electric motors. You can pick the 22 kW electric motor that best fits your need by power and speed in the online electric motor shop, and study all models of this class together in the three-phase asynchronous electric motors category.
Where does 22 kW act as the main drive in heavy industry?
This is no longer workshop work. In the field we meet 22 kW most on stone and mineral crushing and screening lines, large screw and piston compressors, feed and pellet mills, extruders and granulators, high-flow scroll fans and heavy mixers. The common trait is a hard start: the load carries real inertia and the motor must deliver solid torque from the first instant.
So when choosing a 22 kW electric motor, the power figure alone is not a guide. The same 22 kW comes in different speeds, frame sizes and shaft diameters. The machine you drive tells you the right combination — and that is exactly what we clarify most at the order stage.
Speed, poles and torque: 3000, 1500, 1000 rpm
Speed is set by the number of poles. With the power fixed at 22 kW, output torque rises as speed falls and both frame and shaft grow. For a rough check, T = 9550 · P / n gives direction; the torque values in the table are approximate against synchronous speed and come out a little higher at rated speed.
| Model | Speed | Torque (approx.) | Rated current (400 V) |
|---|---|---|---|
| DRG DRG-180M-2 | 3000 rpm | 70 Nm | 38.5 A |
| DRG DRG-180L-4 | 1500 rpm | 140 Nm | 39.7 A |
| DRG DRG-200L2-6 | 1000 rpm | 210 Nm | 42.5 A |
The speed decision is also a coupling and pulley decision: the shaft is 48×110 mm on the 3000 and 1500 rpm models and 55×110 mm on the 1000 rpm one. So as you move to the slow, high-torque side, both the frame (from 180 to 200) and the shaft diameter change. If you are unsure of the speed, describe your application in a few words, or get a first idea with our electric motor calculator.
Click to see current electric motor prices and order nowSEE PRICES →
Why is 22 kW offered in a cast-iron housing?
DRG’s aluminium range reaches up to about 11 kW; 22 kW is entirely on the cast-iron (GG) side. This is not a preference but what the load at this scale requires. On crushers, mills and compressor lines with shock starts, the mass of the housing absorbs vibration, takes heat more solidly and steadies the machine itself.
The practical result: you do not have to debate the housing material separately when renewing a 22 kW electric motor. You focus on speed, shaft size and mounting type (foot B3, flange B5 or combined); the rest is already standard at this rating.
The 400/690 V side: current and starting
The 22 kW models are wired 400/690 V (Δ/Y). On the common 400 V three-phase supply this electric motor runs in delta (Δ); on a 690 V supply it connects in star (Y). Do not confuse it with the 230/400 V motors at smaller ratings; a wrong connection is among the most frequent problems we see at this power.
The rated current at 400 V changes with speed and sits in the 38–43 A band (see the table). This current is the starting point for thermal relay setting, contactor and cable sizing. At 22 kW the starting current is a multiple of the rated current, so the starting method — direct, star-delta or soft starter — is assessed separately in the panel. Always set protection values and cross-section to the real figure on the motor nameplate; do not work under live power, and leave connection and measurement to authorised electrical staff. Our cable size calculator and motor current chart make this step easier.
Fast shipping from the warehouse: how ready dispatch works
DRG Motor is based in İzmir and ships fast by cargo to all of Türkiye, including that city. As standard speed options at a widely requested rating like 22 kW are kept ready in cast-iron housings, the time between order confirmation and dispatch is short. We reach İstanbul, Bursa, Kocaeli, Gebze, Ankara, Konya or any industrial region of Anatolia with the same approach, in a short time. We keep no physical stock point in İstanbul; our physical centre is in İzmir and shipping goes out from there.
For a firm delivery day, just send us your model and province; we plan the right speed and the fastest shipping route together. The urgent renewal of a stopped crushing line and the main drive of a newly built plant both run through the same channel.
Four things to settle before ordering
Four headings are enough to base the order on a solid choice:
- Speed: the speed your machine needs (3000, 1500 or 1000 rpm).
- Mounting and shaft: foot (B3), flange (B5) or combined; a 48×110 mm or a 55×110 mm shaft.
- Voltage: your site supply (commonly 400 V three-phase → delta connection).
- Starting: whether the panel uses direct, star-delta or a soft starter.
With these four, you can select the right model in the electric motor shop and complete the order, and ask us wherever you are unsure. If you are renewing an existing unit, the most practical way is to send us the old electric motor’s nameplate — power, speed, housing and shaft diameter become clear at a glance.
Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp
See the current models and prices for your 22 kW electric motor in the shop.SEE PRICES
Frequently asked questions
How many HP is 22 kW?
22 kW is about 30 HP (1 HP ≈ 0.746 kW). Buyers looking for a "30 HP electric motor" are usually pointed to this power class too.
Is a 22 kW electric motor available in aluminium?
At this rating the housing is cast iron. DRG’s aluminium range reaches up to about 11 kW; at 22 kW the load calls for a cast-iron (GG) housing.
Which speed should I choose?
Your machine sets the speed: 3000 rpm for fast-turning pumps/compressors, 1500 rpm for general drives, 1000 rpm for hard-starting slow loads. If unsure, describe your application or check the calculator.
Which provinces do you deliver to?
We ship from İzmir to all of Türkiye by cargo. For a firm delivery day, send your model and province and we will set the fastest route together.
Electric Motors Related to This Topic — Models and Current Prices
Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.
22 kW Three-Phase Motor 3000 rpm – DRG-180M-2 Cast Iron
- 22 kW · 3000 rpm (2 poles)
- Cast iron frame · IEC 180M
- Shaft: 48 × 110 mm
22 kW Three-Phase Motor 1500 rpm – DRG-180L-4 Cast Iron
- 22 kW · 1500 rpm (4 poles)
- Cast iron frame · IEC 180L
- Shaft: 48 × 110 mm
22 kW Three-Phase Motor 1000 rpm – DRG-200L2-6 Cast Iron
- 22 kW · 1000 rpm (6 poles)
- Cast iron frame · IEC 200L
- Shaft: 55 × 110 mm













