DRG Motor keeps the 15 kW (about 20 HP) three-phase asynchronous electric motor ready in three speeds — 3000, 1500 and 1000 rpm — in a cast-iron housing, and ships it fast from İzmir to anywhere in Türkiye. At this rating what matters is not only the kilowatts but the speed your machine needs, the housing material and the current on the 400 V side.

15 kW grey cast-iron DRG three-phase asynchronous electric motor, ready for dispatch and fast shipping

DRG Motor is a manufacturer, supplier and seller of electric motors. You can pick the 15 kW electric motor that best fits your need by power and speed in the online electric motor shop, and see all models in this class together in the three-phase asynchronous electric motors category.

Where does 15 kW come in?

This rating is the threshold where you leave workshop scale and move into the main drives of medium-to-heavy industry. In the field we meet 15 kW most on larger centrifugal and surface pumps, screw and piston compressors, high-flow extractors and scroll fans, stone and marble cutting and crushing lines, mills, granulators and mixers. The common thread: the load now carries real inertia and the moment of start-up is not gentle.

So when choosing a 15 kW electric motor, "how many kW" is not enough on its own. The same 15 kW comes in different speeds, frame sizes and shaft diameters; your machine tells you the right combination.

Speed, poles and torque: 3000, 1500, 1000 rpm

Speed is set by the number of poles. With the 15 kW power fixed, torque at the output rises as speed falls and the frame grows. For a rough check T = 9550 · P / n is a guide; the torque figures below are approximate and are a little higher at rated speed.

  • 2 poles / ~3000 rpm: High speed, low torque. The home of fast-turning centrifugal pumps and compressors; the frame stays at 160M.
  • 4 poles / ~1500 rpm: The most requested middle ground, where speed and torque balance; most fans, conveyors and general drives.
  • 6 poles / ~1000 rpm: Low speed, high torque, for hard-starting mixers, crushers and mill loads. The frame goes up to 180L.
ModelSpeedTorque (approx.)Rated current (400 V)
DRG DRG-160M2-23000 rpm48 Nm26.5 A
DRG DRG-160L-41500 rpm96 Nm27.3 A
DRG DRG-180L-61000 rpm143 Nm29.3 A

As the frame grows, the shaft changes too: 42×110 mm on the 3000 and 1500 rpm models, 48×110 mm on the 1000 rpm one. So the speed decision is also a coupling, pulley and mounting decision. If you are unsure which speed fits, describe your application in a few words, or get a first idea with our electric motor calculator.

Click to see current electric motor prices and order nowSEE PRICES →

Why a cast-iron housing at 15 kW?

DRG’s aluminium range reaches up to about 11 kW; 15 kW and above are offered in cast-iron (GG) housings. This is not a preference but what the load at this scale requires. A cast-iron housing takes the vibration, heat and mechanical stress of the 15 kW class more solidly; on crushing, screening and compressor lines with shock starts, the mass of the housing also steadies the machine.

In practice this means you do not have to decide the housing material separately when renewing a 15 kW electric motor; cast iron is the standard at this rating. You focus on speed, shaft size and mounting type.

The 400 V side: current, voltage and connection

The 15 kW models are wired 400/690 V (Δ at 400 V, Y at 690 V). On the common 400 V three-phase supply this electric motor runs in delta (Δ); on 690 V supplies it connects in star. This should not be confused with the 230/400 V motors at smaller ratings, and a wrong connection is a leading cause of trouble at this power.

The rated current at 400 V changes with speed: about 26.5 A at 3000 rpm, 27.3 A at 1500 rpm and 29.3 A at 1000 rpm. These are the starting point for thermal relay setting, contactor and cable sizing; at 15 kW the starting current is a multiple of the rated current, so the starting method (direct, star-delta or soft starter) is assessed separately in the panel. Always set protection and cross-section to the real value on the motor nameplate; do not work under live power, and leave connection and measurement to authorised electrical staff. Our cable size calculator and motor current chart help at this step.

How ready dispatch works: fast shipping from the warehouse

DRG Motor is based in İzmir and ships fast by cargo to all of Türkiye, including that city. As standard speed options at a common rating like 15 kW are kept ready in cast-iron housings, the time from order confirmation to dispatch is short. We reach İstanbul, Bursa, Kocaeli, Ankara, Konya or any province of Anatolia with the same approach, in a short time.

For a firm delivery day, just send us your model and province; we plan the right speed and the fastest shipping route together. Whether it is the urgent renewal of a stopped line or the main drive of a new machine, the process runs through the same channel.

Pinning down the right 15 kW model quickly

Four pieces of information are enough to base the order on a solid choice:

  1. Speed: the speed your machine needs (3000, 1500 or 1000 rpm).
  2. Mounting and shaft: foot (B3), flange (B5) or combined; a 42×110 mm or a 48×110 mm shaft.
  3. Voltage: your site supply (commonly 400 V three-phase → delta connection).
  4. Starting: whether the panel uses direct, star-delta or a soft starter.

With these four, you can select the right model in the electric motor shop and complete the order, and ask us wherever you are unsure. If you are renewing an existing electric motor, the most practical way is to send us the old unit’s nameplate.

Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp

See the current options and prices for your 15 kW electric motor in the shop.SEE PRICES

Frequently asked questions

How many HP is 15 kW?

15 kW is about 20 HP (1 HP ≈ 0.746 kW). Buyers looking for a "20 HP electric motor" are usually pointed to this power class too.

Is a 15 kW electric motor available in aluminium?

At this rating the housing is cast iron. DRG’s aluminium range reaches up to about 11 kW; at 15 kW and above the load calls for a cast-iron housing.

Which speed should I choose?

Your machine sets the speed: 3000 rpm for fast-turning pumps/compressors, 1500 rpm for general drives, 1000 rpm for high-torque slow loads. If unsure, describe your application or check the calculator.

How is it connected at 400 V?

As the 15 kW models are 400/690 V, they connect in delta (Δ) on the common 400 V three-phase supply. Always make the connection by reading the nameplate and with authorised staff; do not work under live power.

Electric Motors Related to This Topic — Models and Current Prices

Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.

ALL MODELS AND DETAILS IN THE ONLINE SHOP →