The 15 kW (about 20 HP) three-phase asynchronous electric motor is where drives start to get heavy: large compressors, stone and plastic crushers, high-flow pumps, mills and granulators all run in this class. DRG Motor offers this rating in 3000, 1500 and 1000 rpm options with a cast-iron housing, and ships it fast from İzmir to all of Türkiye.
DRG Motor is a manufacturer, supplier and seller of electric motors. You can pick the 15 kW electric motor that suits you by power and speed in the online electric motor shop, and see the whole class together in the three-phase asynchronous electric motors category.
Where does a 15 kW electric motor work?
This rating leaves the "small drive" class behind. In the field you meet a 15 kW electric motor most often in front of screw and piston compressors, jaw or impact crushers, centrifugal and surface pumps, booster and fire-pump sets, feed and grain mills, plastic granulating and crushing lines, and large extraction fans. They share one thing: the load is heavy, the start is hard, and the motor runs under load for much of the day.
With such a load, reducing the choice to a single number is misleading. 15 kW is built in three speeds at once; which one fits depends on the speed and torque your driven machine asks for.
Why is the housing cast iron at 15 kW?
DRG’s aluminium range reaches up to 11 kW; 15 kW is above that limit. So at this rating the motor comes with a cast-iron housing, and that is not a preference but the natural result of scale. Cast iron gives heavy industry what it needs: high resistance to impact and vibration, a steadier seat at the coupling or belt-pulley drive, and a solid foot-and-shaft structure that holds its dimensions for years.
In practice this also eases the fitter’s job: the housing forms its own centre of mass and does not sway once bolted down. A 15 kW electric motor needs a forklift or pallet when moved; settling the lifting means at the delivery point up front makes the job smoother.
Click to see current electric motor prices and order nowSEE PRICES →
Speed, housing and current: three options side by side
Speed is set by the number of poles. At 15 kW there are three standard speeds that deliver the same power with a different torque-speed balance. As speed drops, the frame grows: the 3000 and 1500 rpm models are on a 160 frame, the 1000 rpm model on a 180 frame. Each model code in the table links to its product page.
| Model | Speed | Rated current (400 V) | Shaft (D×E) |
|---|---|---|---|
| DRG DRG-160M2-2 | 3000 rpm (2-pole) | 26.5 A | 42x110 mm |
| DRG DRG-160L-4 | 1500 rpm (4-pole) | 27.3 A | 42x110 mm |
| DRG DRG-180L-6 | 1000 rpm (6-pole) | 29.3 A | 48x110 mm |
A rough rule: with power fixed, lower speed means higher shaft torque. The 3000 rpm model has relatively low torque and high speed; the 1000 rpm model is the opposite, high torque and low speed (the relation T = 9550 · P / n sums it up). Low speed usually suits hard-starting crushers and mills, high speed suits fast pumps and compressors.
If you are unsure which speed fits, describe your application in a few words and we will decide together by load type. For a first idea, see our electric motor calculator.
Connection and 400 V current values
The 15 kW models are wound 400/690 V (Δ/Y); that is, they connect in delta (Δ) on the common 400 V three-phase supply. Their rated current at 400 V ranges from 26.5 A to 29.3 A with speed. Direct-on-line starting strains the supply hard at this rating, so a star-delta or soft starter is preferred in most installs.
Choose the thermal relay, contactor and cable cross-section to the real value on the motor nameplate. Do not work under live power, verify isolation, and leave the connection to authorised electrical staff. Our cable size calculator and motor current chart give a starting point.
Fast delivery from İzmir and project supply
DRG Motor is based in İzmir and delivers fast by cargo to all of Türkiye, that city included. As 15 kW is a common industrial rating, standard speed and housing options are kept ready, which shortens the time between order and dispatch. We reach your plant in İstanbul, Bursa, Kocaeli, Ankara, Gaziantep or any other province with the same approach, in a short time.
You may need to replace a failed electric motor urgently, or buy in bulk for a new line; we handle both through the same channel. For project-based supply, share the quantity, speed and delivery schedule in advance and we plan the shipment to suit you. Given the heavy housing, agreeing on palletised shipping and the unloading means up front avoids surprises.
How to order the right 15 kW model
Four facts are enough to base the order on a solid choice:
- Speed: the speed your machine needs (3000, 1500 or 1000 rpm).
- Mounting and shaft: foot (B3), flange (B5) or combined; shaft 42×110 or 48×110 mm.
- Voltage and starting: your site supply (commonly 400 V three-phase) and the start method.
- Application: which machine it drives, and whether the load is heavy and hard-starting.
With this you can select the right model in the electric motor shop and complete the order, and ask us wherever you are unsure. If you are replacing an existing motor, the most practical way is to photograph the old nameplate and send it to us.
Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp
See the current options and price for your 15 kW electric motor in the shop.SEE PRICES
Frequently asked questions
How many HP is 15 kW?
15 kW is about 20 HP (1 HP ≈ 0.746 kW). Buyers looking for a "20 HP electric motor" are usually pointed to this power class too.
Is there an aluminium housing at 15 kW?
No. The aluminium range is built up to 11 kW; as 15 kW is above that limit it comes with a cast-iron housing, which also provides the strength a heavy load needs.
Which speed should I choose?
Your machine sets the speed: 3000 rpm for fast pumps and compressors, 1500 rpm for general drives, 1000 rpm for hard-starting crushers and mills. If unsure, describe your application or check the calculator.
How long does delivery take?
DRG Motor is based in İzmir and ships fast by cargo across Türkiye. As 15 kW is a common rating, standard options leave quickly; for precise delivery details just send us your model and province.
Electric Motors Related to This Topic — Models and Current Prices
Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.
15 kW Three-Phase Motor 3000 rpm – DRG-160M2-2 Cast Iron
- 15 kW · 3000 rpm (2 poles)
- Cast iron frame · IEC 160M
- Shaft: 42 × 110 mm
15 kW Three-Phase Motor 1500 rpm – DRG-160L-4 Cast Iron
- 15 kW · 1500 rpm (4 poles)
- Cast iron frame · IEC 160L
- Shaft: 42 × 110 mm
15 kW Three-Phase Motor 1000 rpm – DRG-180L-6 Cast Iron
- 15 kW · 1000 rpm (6 poles)
- Cast iron frame · IEC 180L
- Shaft: 48 × 110 mm













