The 11 kW (about 15 HP) three-phase asynchronous electric motor sits exactly at the top edge of DRG Motor’s aluminium housing range; above it, only cast iron continues. It is kept ready in 3000, 1500 and 1000 rpm options, in both aluminium and cast-iron housings, and dispatched quickly from the İzmir-based warehouse to anywhere in Türkiye.
DRG Motor is a manufacturer, supplier and seller of electric motors. You can choose the 11 kW electric motor by power and speed in the online electric motor shop, and review the whole power class together in the three-phase asynchronous electric motors category.
Where does 11 kW come in?
This rating is the step from workshop to light industry. On site it shows up most in booster and surface pump sets, mid-size screw and piston compressors, extraction and ventilation fans, crusher and grinder lines, conveyor and elevator drives, and wood or metal benches. The common thread: at 11 kW the weight of the motor, the current at the panel and the shaft-coupling alignment all become figures you have to account for one by one.
So power alone is not an order. The same 11 kW comes in three speeds and two housing materials; the right pick depends on the speed your machine needs and its working environment.
Three speeds, three characters
Speed is set by the number of poles, and at 11 kW there are three standard classes. The power stays the same but the speed-torque balance at the output changes, and the frame grows with it.
| Model | Speed / poles | Housing (IEC) | Rated current (400 V) |
|---|---|---|---|
| DRG DRG-160M1-2 | 3000 rpm · 2-pole | aluminium · 160M | 19.6 A |
| DRG DRG-160M-4 | 1500 rpm · 4-pole | aluminium · 160M | 20.4 A |
| DRG DRG-132M-4K | 1500 rpm · 4-pole | aluminium, compact · 132M | 20.4 A |
| DRG DRG-160L-6 | 1000 rpm · 6-pole | aluminium · 160L | 22.0 A |
| DRG DRG-160M1-2 | 3000 rpm · 2-pole | cast iron · 160M | 19.6 A |
| DRG DRG-160M-4 | 1500 rpm · 4-pole | cast iron · 160M | 20.4 A |
In short: 2 poles (3000 rpm) for fast, low-torque work; 4 poles (1500 rpm) the most-asked middle balance; 6 poles (1000 rpm) for slow, high-torque heavy loads. Note that the 1000 rpm model steps up to a 160L frame, so at the same power it is the largest and heaviest of the three.
Click to see current electric motor prices and order nowSEE PRICES →
Aluminium or cast iron? 11 kW is right on the edge
11 kW has a special twist: DRG’s aluminium housing range ends at this rating. So 11 kW is the last step where you can still pick aluminium; above it is cast-iron territory. That is why, at 11 kW, the housing material is a genuine choice.
- Aluminium housing (e.g. DRG 160M-4 aluminium): Clearly lighter. It makes life easier where the motor is lifted, wheeled or carried up a floor, or where it moves from time to time.
- Cast-iron housing (e.g. DRG 160M-4 cast iron): Heavier but more resistant to impact, vibration and dusty-damp harsh conditions. It stands out on fixed, hard-running lines.
Both share the same electrical values; the difference is purely in the mechanical character of the housing. Shaft and mounting dimensions also match, so when replacing an existing motor you can switch the material freely.
A compact frame option: 132M-4K
At 1500 rpm there are two paths. The standard DRG 160M-4 comes in a 160 frame; the DRG 132M-4K fits the same 11 kW into a frame size smaller, the 132 frame. In tight panel-base or in-machine installs, that smaller body saves the day.
The difference is not only size but the shaft: the compact type has a 38×80 mm shaft, while the standard 160 frame uses 42×110 mm. If a coupling, pulley or gearbox input is already in place, confirm the shaft diameter up front; otherwise the small-frame advantage turns into lost time at assembly.
400 V current and the panel side
The 11 kW models are wound 400/690 V (Δ/Y); on the common 400 V three-phase supply they connect in delta (Δ). Their rated current at 400 V varies slightly with speed: about 19.6 A at 3000 rpm, 20.4 A at 1500 rpm and 22.0 A at 1000 rpm. At this rating a star-delta or soft starter often comes into play, because the inrush at direct start can strain the supply.
Always size the thermal relay and cable to the real value on the motor nameplate. Do not work under live power, verify the de-energised state, and leave the connection to authorised electrical staff. For a first look, our motor current chart and cable size calculator help.
Ready delivery, İzmir-based supply
DRG Motor is based in İzmir and delivers fast by cargo to all of Türkiye, including that city. As 11 kW is a common rating, standard speed and housing options are kept ready, which shortens the time between order and dispatch. We reach İstanbul, Ankara, Bursa, Kocaeli, Konya, Denizli or any province of Anatolia with the same approach, in a short time.
An urgent breakdown replacement, or a new line build? Describe the situation in a few words and we will plan the right model and the fastest delivery route together. Bulk purchases and project-based supply run through the same channel.
Clarify these when ordering
Four facts are enough for the right dispatch at 11 kW:
- Speed: 3000, 1500 or 1000 rpm.
- Housing: aluminium or cast iron.
- Mounting and shaft: foot (B3), flange (B5/B14) or combined; the standard 160 shaft or the compact 132 shaft.
- Voltage and starting: your supply (commonly 400 V three-phase) and the start method.
With this you can select the right model in the electric motor shop and complete the order, and ask us wherever you are unsure. If you are replacing an existing unit, the most practical way is to send us the old nameplate.
Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp
See the current options and prices for your 11 kW electric motor in the shop.SEE PRICES
Frequently asked questions
How many HP is 11 kW?
11 kW is about 15 HP (1 HP ≈ 0.746 kW). Buyers looking for a "15 HP electric motor" are usually pointed to this power class too.
Is an aluminium housing available at 11 kW?
Yes. 11 kW is the top step of the DRG aluminium range, so here you can pick both aluminium and cast iron. At higher ratings only cast iron remains.
What is the difference between 11 kW in a 132 frame and a 160 frame?
Power and electrical values are identical. The compact 132M-4K comes in a smaller frame with a 38×80 mm shaft; the standard 160M uses a larger frame and a 42×110 mm shaft. Where space is tight, choose the compact, matched to the existing shaft.
Will an 11 kW electric motor run on 380 V?
The models are wound 400/690 V (Δ/Y) and connect in delta on the common 380–400 V three-phase supply. Send us your supply voltage and we will settle the connection and start method together.
Electric Motors Related to This Topic — Models and Current Prices
Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.
11 kW Three-Phase Motor 3000 rpm – DRG-160M1-2 Aluminium
- 11 kW · 3000 rpm (2 poles)
- Aluminium frame · IEC 160M
- Shaft: 42 × 110 mm
11 kW Three-Phase Motor 1500 rpm – DRG-160M-4 Aluminium
- 11 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 160M
- Shaft: 42 × 110 mm
11 kW Compact Three-Phase Motor 1500 rpm – DRG-132M-4K Aluminium
- 11 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 132M
- Shaft: 38 × 80 mm
11 kW Three-Phase Motor 1000 rpm – DRG-160L-6 Aluminium
- 11 kW · 1000 rpm (6 poles)
- Aluminium frame · IEC 160L
- Shaft: 42 × 110 mm
11 kW Three-Phase Motor 3000 rpm – DRG-160M1-2 Cast Iron
- 11 kW · 3000 rpm (2 poles)
- Cast iron frame · IEC 160M
- Shaft: 42 × 110 mm
11 kW Three-Phase Motor 1500 rpm – DRG-160M-4 Cast Iron
- 11 kW · 1500 rpm (4 poles)
- Cast iron frame · IEC 160M
- Shaft: 42 × 110 mm
















