The 11 kW (15 HP) three-phase asynchronous electric motor is the power step that runs mid-to-heavy industry: from booster and irrigation pumps to screw compressors, from stone and concrete crushers to conveyor drives. DRG Motor keeps this rating ready in 3000, 1500 and 1000 rpm options, in both aluminium and cast-iron housings, and ships it fast from İzmir to anywhere in Türkiye.
DRG Motor is a manufacturer, supplier and seller of electric motors. You can pick the 11 kW model that best fits your need, by power and speed, in the online electric motor shop, and see the whole power class together in the three-phase asynchronous electric motors category.
Where does an 11 kW electric motor work?
This rating is the threshold where a single machine needs serious drive power, yet you have not stepped up to large cast frames and special panels. In the field it shows up most in:
- Screw and piston compressors, compressed-air lines
- Booster sets, deep-well and irrigation pumps
- Small-to-mid crushers in stone, concrete and recycling plants
- Conveyor and belt drives, elevators
- Mills, mixers and feed machines
One point: "let us take 11 kW" does not complete the order on its own. The same rating comes in three speeds and two housing materials; the right pick depends on the speed and connection your machine asks for.
The last rung of the aluminium range
11 kW holds a special place in this line: DRG’s aluminium-housing electric motors run from 0.25 kW up to 11 kW. In other words, 11 kW is the highest power at which you can still choose the light aluminium housing. From the next step up (15 kW and beyond) only cast iron remains.
That makes 11 kW a practical decision point. If you want a housing that is easy to carry, lift and mount, or you move the motor often and weight matters, aluminium is still on the table. If you want a tougher build that resists impact and vibration, cast iron is available at the same rating. Both housings give the same electrical values; the difference is purely mechanical.
Click to see current electric motor prices and order nowSEE PRICES →
Speed, housing and the 11 kW model list
Speed is set by the number of poles. High speed suits fast loads like pumps and compressors; low speed suits high-torque, demanding loads like crushers and mills. Each model in the table links to its product page:
| Model | Speed | Housing | Rated current (400 V) |
|---|---|---|---|
| DRG DRG-160M1-2 | 3000 rpm | aluminium | 19.6 A |
| DRG DRG-160M-4 | 1500 rpm | aluminium | 20.4 A |
| DRG DRG-132M-4K | 1500 rpm | aluminium (compact) | 20.4 A |
| DRG DRG-160L-6 | 1000 rpm | aluminium | 22.0 A |
| DRG DRG-160M1-2 | 3000 rpm | cast iron | 19.6 A |
| DRG DRG-160M-4 | 1500 rpm | cast iron | 20.4 A |
| DRG DRG-160L-6 | 1000 rpm | cast iron | 22.0 A |
If you are unsure about the speed, describe the machine in a few words and we settle it together by load type. For a first idea you can also use our electric motor calculator.
Tight space? The compact 132 frame option
The standard size for 11 kW is the IEC 160 frame. But at 1500 rpm we also offer the same rating one size smaller, on a 132 frame, with the DRG 132M-4K compact model. Its shaft is 38×80 mm, while the standard 160 frame models use 42×110 mm. If space is limited on your line, or you are renewing an older 132-frame layout, this option can fit; just confirm the shaft diameter and coupling size before ordering.
Connection and 400 V current values
The 11 kW models are wired 400/690 V (Δ/Y); on the common 400 V three-phase supply they connect in delta (Δ). Rated current at 400 V varies with speed: about 19.6 A on the 3000 rpm model, 20.4 A at 1500 rpm and 22.0 A at 1000 rpm. These values are the starting point for thermal relay and cable sizing.
Size cables and protection to the real value on the motor nameplate; isolate power at the panel, verify it is dead, and leave the connection to authorised electrical staff. Our cable size calculator and motor current chart help here.
İzmir-based, fast supply across Türkiye
DRG Motor is based in İzmir and delivers fast by cargo to all of Türkiye, that city included. As 11 kW is a common industrial rating, standard speed and housing options are kept ready, which shortens the time from order to dispatch. A compressor service in İstanbul, a crusher renewal in Kocaeli or an irrigation line in Konya all reach you quickly, with the same approach.
An urgent breakdown swap, or a new line build? Tell us the need and we plan the right model and the fastest delivery route together. The same channel works for bulk purchases and project-based supply.
How to request the right 11 kW electric motor
Four pieces of information are enough to base the order on a solid choice:
- Speed: the speed your machine needs (3000, 1500 or 1000 rpm).
- Housing: light aluminium or rugged cast iron.
- Mounting and shaft: foot (B3), flange (B5/B14) or combined, plus shaft size.
- Voltage: your site supply (commonly 400 V three-phase).
With this you can select the right model in the electric motor shop and complete the order, and ask us wherever you are unsure. If you are replacing an existing unit, the most practical way is to send us the old motor nameplate.
Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp
See the current options and prices for your 11 kW electric motor in the shop.SEE PRICES
Frequently asked questions
How many HP is 11 kW?
11 kW is about 15 HP (1 HP ≈ 0.746 kW). Buyers looking for a "15 HP electric motor" are usually pointed to this power class too.
Can I get the 11 kW motor with an aluminium housing?
Yes. 11 kW is the top rung of the DRG aluminium-housing range; an aluminium option exists in all three speed classes. At higher powers the housing moves to cast iron.
Which speed should I choose?
Your machine sets the speed: 3000 rpm for fast pumps/compressors, 1500 rpm for general drives, 1000 rpm for high-torque crushers/mills. If unsure, describe your application or check the calculator.
How long does delivery take?
DRG Motor is based in İzmir and ships fast by cargo across Türkiye. As 11 kW is a common rating, standard options leave quickly; for precise details just send us your model and province.
Electric Motors Related to This Topic — Models and Current Prices
Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.
11 kW Three-Phase Motor 3000 rpm – DRG-160M1-2 Aluminium
- 11 kW · 3000 rpm (2 poles)
- Aluminium frame · IEC 160M
- Shaft: 42 × 110 mm
11 kW Three-Phase Motor 1500 rpm – DRG-160M-4 Aluminium
- 11 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 160M
- Shaft: 42 × 110 mm
11 kW Compact Three-Phase Motor 1500 rpm – DRG-132M-4K Aluminium
- 11 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 132M
- Shaft: 38 × 80 mm
11 kW Three-Phase Motor 1000 rpm – DRG-160L-6 Aluminium
- 11 kW · 1000 rpm (6 poles)
- Aluminium frame · IEC 160L
- Shaft: 42 × 110 mm
11 kW Three-Phase Motor 3000 rpm – DRG-160M1-2 Cast Iron
- 11 kW · 3000 rpm (2 poles)
- Cast iron frame · IEC 160M
- Shaft: 42 × 110 mm
11 kW Three-Phase Motor 1500 rpm – DRG-160M-4 Cast Iron
- 11 kW · 1500 rpm (4 poles)
- Cast iron frame · IEC 160M
- Shaft: 42 × 110 mm
















