A 1 HP electric motor corresponds to about 0.75 kW. The conversion between horsepower (HP) and kilowatts (kW) uses the fixed relation kW = HP × 0.746, so when you look for a 1 horsepower motor you will, in practice, meet a 0.75 kW three-phase asynchronous motor as the standard product.
DRG Motor is a manufacturer, supplier and seller of electric motors. You can find every 0.75 kW three-phase model by power and speed in the online motor shop, and see the same motors grouped in the three-phase asynchronous electric motors category. Below you will find the HP–kW conversion, the nearest standard powers and the DRG models that suit 1 HP.
How many kW is 1 HP? The logic of the conversion
Horsepower (HP) is an older unit of power; today a motor's rated power is given in kilowatts (kW). The relationship between them is fixed: 1 HP equals about 0.746 kW. So the answer to "how many kW is a 1 HP motor?" is 0.746 kW, rounded to the standard 0.75 kW. In reverse, to turn a motor's kW value into HP you simply divide by 0.746 (for example 1.5 kW ÷ 0.746 ≈ 2 HP).
One detail matters here: rated motor powers are not arbitrary but follow internationally agreed steps. On the low-power side these steps run 0.55 – 0.75 – 1.1 – 1.5 – 2.2 kW. Although "1 horsepower" is exactly 0.746 kW, no separate 0.746 kW rung exists in the catalogue; the nearest standard value is 0.75 kW. That is why the real product match for a 1 HP need is a 0.75 kW three-phase motor.
HP–kW conversion table
The horsepower equivalents of the most commonly requested powers are shown below. The values come from kW = HP × 0.746 and are placed on the nearest standard kW step:
| Standard kW | Approx. HP | Everyday term |
|---|---|---|
| 0.75 kW | ≈ 1 HP | 1 horsepower |
| 1.1 kW | ≈ 1.5 HP | 1.5 horsepower |
| 1.5 kW | ≈ 2 HP | 2 horsepower |
| 2.2 kW | ≈ 3 HP | 3 horsepower |
As you can see, "1 horsepower" matches 0.75 kW, "1.5 horsepower" 1.1 kW, "2 horsepower" 1.5 kW and "3 horsepower" 2.2 kW. When you convert a request given in HP, rounding the intermediate figure up to the next standard step is the safest choice; this small margin gives comfort during short load peaks. To preview power and current, use the electric motor calculator and the motor current chart tools.
Click to see current electric motor prices and order nowSEE PRICES →
Nearest DRG models for 1 HP: 0.75 kW three-phase
In the DRG range 0.75 kW is available in three speed classes (2, 4 and 6 poles) and two housing materials (aluminium and cast iron). The table below shows each model's pole/speed class, rated torque and rated current at 400 V; the codes link straight to the product page. The voltage on all of them is 230/400 V (Δ/Y).
| Model | Poles / Speed | Torque | Rated current (400 V) |
|---|---|---|---|
| DRG-801-2-AL (aluminium) | 2 poles / 3000 rpm | 2.49 Nm | 1.64 A |
| DRG-802-4-AL (aluminium) | 4 poles / 1500 rpm | 5.04 Nm | 1.75 A |
| DRG-90S-6-AL (aluminium) | 6 poles / 1000 rpm | 7.66 Nm | 1.93 A |
| DRG-801-2-GG (cast iron) | 2 poles / 3000 rpm | 2.49 Nm | 1.64 A |
| DRG-802-4-GG (cast iron) | 4 poles / 1500 rpm | 5.04 Nm | 1.75 A |
| DRG-90S-6-GG (cast iron) | 6 poles / 1000 rpm | 7.66 Nm | 1.93 A |
Torque values can also be checked with T = 9550 · P / n: for a fixed power (kW), torque rises as speed falls. That is why the 6-pole 1000 rpm model gives clearly higher torque than the 2-pole 3000 rpm model of the same 0.75 kW power.
2, 4 and 6 poles: which speed suits you?
The same 0.75 kW is offered at different speeds because an application often needs not just power but speed and torque:
- 2 poles (about 3000 rpm): high speed, low torque. Suitable for small pumps, fans and high-speed applications.
- 4 poles (about 1500 rpm): the most common mid speed. A balanced choice for conveyors, mixers and general drives.
- 6 poles (about 1000 rpm): low speed, high torque. Preferred for heavy starting or low-speed mechanisms.
If you are replacing an existing motor, reading the speed on its nameplate and choosing the same pole count is the safest path, so that both power and speed match the need.
Aluminium or cast iron housing?
In the 0.75 kW class both aluminium and cast iron housings exist, and the electrical values (power, speed, torque, current) are identical. The difference is mechanical:
- Aluminium housing: lighter and easier to carry and mount. Practical for light machines and frequently relocated setups. Aluminium options are also listed together on the aluminium body electric motors page.
- Cast iron housing: heavier and more rugged; preferred where vibration and mechanical stress are high.
The choice is about finding what best fits the need; both housings deliver the same 0.75 kW performance.
230/400 V connection and safety
The 0.75 kW models are wound for 230/400 V (Δ/Y). On a 400 V three-phase supply the motor is connected in star (Y); on a 230 V three-phase supply in delta (Δ). The nameplate states which connection matches which voltage; always wire according to the motor nameplate and panel documentation.
Before any electrical work, switch off the supply, verify it is de-energised and have the connection carried out only by qualified electrical personnel. Set protection values such as the thermal current according to the rated current on the motor nameplate, not from memory. For cable sizing, the motor cable size calculator tool is a useful guide.
Shaft and mounting dimensions
1 HP (0.75 kW) motors come in two IEC frame sizes depending on the speed class. The 2- and 4-pole models are in frame 80 (shaft 19×40 mm), while the 6-pole model is in frame 90S (shaft 24×50 mm). When replacing an old motor, compare not only the power but the shaft diameter, foot/flange dimensions and the mounting type (B3 foot, B5/B14 flange). Since a coupling, pulley or gearbox input is chosen by shaft diameter, this dimension is critical.
Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp
Once you have chosen the right 0.75 kW model, you can compare all speed and housing options through the shop.
See the 1 HP (0.75 kW) and neighbouring three-phase asynchronous motor models and current prices in the shopSEE PRICES
Frequently asked questions
How many kW is 1 HP?
1 HP equals about 0.746 kW; as a standard product step this is rounded to 0.75 kW. So the match for a 1 horsepower motor request is a 0.75 kW three-phase asynchronous motor.
What is the rated current of a 0.75 kW motor?
At 400 V it is roughly 1.6–1.9 A depending on the speed class; always check the motor nameplate for the exact value. The table above gives the current of each 0.75 kW DRG model.
How many kW is 2 HP?
2 HP ≈ 1.5 kW and 3 HP ≈ 2.2 kW. Multiply the HP figure by 0.746 and round to the nearest standard kW step to find it quickly.
Which speed should I choose for a 1 HP motor?
If you are replacing a motor, follow the speed on its nameplate. For a new application choose 2 poles for speed, 4 poles for balance and 6 poles for high torque.
Electric Motors Related to This Topic — Models and Current Prices
Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.
0.75 kW Three-Phase Motor 3000 rpm – DRG-801-2 Aluminium
- 0.75 kW · 3000 rpm (2 poles)
- Aluminium frame · IEC 80
- Shaft: 19 × 40 mm
0.75 kW Three-Phase Motor 1500 rpm – DRG-802-4 Aluminium
- 0.75 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 80
- Shaft: 19 × 40 mm
0.75 kW Three-Phase Motor 1000 rpm – DRG-90S-6 Aluminium
- 0.75 kW · 1000 rpm (6 poles)
- Aluminium frame · IEC 90S
- Shaft: 24 × 50 mm
0.75 kW Three-Phase Motor 3000 rpm – DRG-801-2 Cast Iron
- 0.75 kW · 3000 rpm (2 poles)
- Cast iron frame · IEC 80
- Shaft: 19 × 40 mm
0.75 kW Three-Phase Motor 1500 rpm – DRG-802-4 Cast Iron
- 0.75 kW · 1500 rpm (4 poles)
- Cast iron frame · IEC 80
- Shaft: 19 × 40 mm
0.75 kW Three-Phase Motor 1000 rpm – DRG-90S-6 Cast Iron
- 0.75 kW · 1000 rpm (6 poles)
- Cast iron frame · IEC 90S
- Shaft: 24 × 50 mm
















