A 1.5 kW three-phase asynchronous electric motor is one of the ratings industry turns most often — from booster pumps and small compressors to fans, extraction lines and lathe or milling benches. DRG Motor keeps this rating ready in 3000, 1500 and 1000 rpm options, in aluminium and cast-iron housings, and ships it fast from its İzmir base to anywhere in Türkiye, that province included.
DRG Motor is a manufacturer, supplier and seller of three-phase asynchronous electric motors. You can pick the 1.5 kW model that best fits your need by power and speed in the online electric motor shop, and view the whole range together in the three-phase asynchronous electric motors category.
Why is 1.5 kW such a common rating?
There is a plain truth on site: most machines neither fit into 0.75 kW nor demand 2.2 kW. 1.5 kW sits right in the middle. It is strong enough to turn a single booster pump, a mid-size fan or a small conveyor, yet modest enough not to need a heavy panel, thick cable or special switchgear. That balance has kept 1.5 kW near the top of order lists for years.
One thing to settle first: "a 1.5 kW electric motor" is not a complete order on its own. The same rating comes in three speeds and two housing materials. The right unit depends on the speed and connection your machine runs on.
Speed: what do 2, 4 and 6 poles change?
You keep the power fixed; the pole count sets the speed. At 1.5 kW the three standard classes split like this:
- 2 poles — 3000 rpm: high speed, low torque, preferred for fast-turning loads such as centrifugal pumps and small compressors.
- 4 poles — 1500 rpm: the most requested balance point; most fans, general pumps, conveyors and gearbox inputs are built around it.
- 6 poles — 1000 rpm: lower speed with a tendency toward higher torque, useful for mixers, hard-starting belts and drives meant to run slowly.
Though all three carry the same 1.5 kW label, their output character differs. Whatever speed your current unit runs at, choosing the replacement at that same speed is the safest route.
Housing: aluminium or cast iron?
1.5 kW is built in both housing materials. The aluminium housing is light, easy to carry and mount, and helps in vertical fittings and frequently relocated jobs. The cast-iron housing is heavier and tougher, preferred where vibration is high, impact is likely or site conditions are harsh. Both share the same mounting dimensions, so the choice mostly follows environment and mounting style.
Click to see current electric motor prices and order nowSEE PRICES →
1.5 kW DRG models and current values
Each model code in the table below links straight to its product page. The current value is for a 400 V connection; use that row when sizing the panel breaker and cable section, and the motor current chart for a cross-check.
| Model | Speed | Current (400 V) | Housing |
|---|---|---|---|
| DRG-90S-2-AL | 3000 rpm | 3.06 A | aluminium |
| DRG-90S-2-GG | 3000 rpm | 3.06 A | cast iron |
| DRG-90L-4-AL | 1500 rpm | 3.3 A | aluminium |
| DRG-90L-4-GG | 1500 rpm | 3.3 A | cast iron |
| DRG-100L-6-AL | 1000 rpm | 3.59 A | aluminium |
| DRG-100L-6-GG | 1000 rpm | 3.59 A | cast iron |
Voltage is 230/400 V (Δ/Y) on every model and the protection class is IP55. The 2- and 4-pole frames have a 24×50 mm shaft; the 6-pole has 28×60 mm — a decisive figure when picking a coupling or pulley.
Ready delivery and fast dispatch from the depot
One of the practical sides of 1.5 kW is supply. Because it is such a popular rating, DRG Motor keeps this class broadly on hand; once an order is confirmed, the product moves without a wait. Shipments leaving the İzmir base reach everywhere in the country, that province included, in a short time.
That speed matters most in breakdown replacements. Every hour a stopped line loses is a cost; when "everything but the motor is ready", a short lead time means a direct return to production. For planned investments it buys predictability: a known arrival date lets you firm up the installation schedule.
To see current 1.5 kW three-phase electric motor models and pricesSEE PRICES
What to settle before ordering
A wrong motor usually comes from missing information. Four points are enough at order time: the required speed (3000/1500/1000), the housing material (aluminium or cast iron), the mounting type (foot B3, flange B5 or B14) and the shaft diameter. The safest method is to photograph the nameplate of the unit you are replacing; the plate carries all of this at once.
If you are sizing the power from scratch, the electric motor calculator takes load and speed inputs and steers you toward the 1.5 kW area. Wherever you are unsure, confirming before you order always costs less.
Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp
Frequently asked questions
How many horsepower is 1.5 kW?
1.5 kW equals about 2 HP (1 HP ≈ 0.746 kW). The three-phase electric motor listed as "2 hp" in catalogues is usually this rating.
Which speed should I choose?
Look at your machine's working speed. If your current unit runs at 1500 rpm, choose a 4-pole replacement; for a fast load like a pump go 2-pole, and for a slow, torquey job like a mixer go 6-pole.
Is the aluminium housing weaker than cast iron?
No; both deliver the same power. The difference is weight and ruggedness. Pick aluminium when lightness and easy mounting matter, cast iron when conditions are harsh or vibration is present.
How long does delivery take?
An exact day depends on the shipping address and the chosen model. DRG Motor is İzmir-based and ships fast across Türkiye, that province included; we share the precise timing at the order stage.
Electric Motors Related to This Topic — Models and Current Prices
Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.
1.5 kW Three-Phase Motor 3000 rpm – DRG-90S-2 Aluminium
- 1.5 kW · 3000 rpm (2 poles)
- Aluminium frame · IEC 90S
- Shaft: 24 × 50 mm
1.5 kW Three-Phase Motor 1500 rpm – DRG-90L-4 Aluminium
- 1.5 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 90L
- Shaft: 24 × 50 mm
1.5 kW Three-Phase Motor 1000 rpm – DRG-100L-6 Aluminium
- 1.5 kW · 1000 rpm (6 poles)
- Aluminium frame · IEC 100L
- Shaft: 28 × 60 mm
1.5 kW Three-Phase Motor 3000 rpm – DRG-90S-2 Cast Iron
- 1.5 kW · 3000 rpm (2 poles)
- Cast iron frame · IEC 90S
- Shaft: 24 × 50 mm
1.5 kW Three-Phase Motor 1500 rpm – DRG-90L-4 Cast Iron
- 1.5 kW · 1500 rpm (4 poles)
- Cast iron frame · IEC 90L
- Shaft: 24 × 50 mm
1.5 kW Three-Phase Motor 1000 rpm – DRG-100L-6 Cast Iron
- 1.5 kW · 1000 rpm (6 poles)
- Cast iron frame · IEC 100L
- Shaft: 28 × 60 mm
















