The 0.75 kW (about 1 HP) three-phase asynchronous electric motor is one of the most frequently used power classes for small drives. DRG Motor offers this rating in 2-, 4- and 6-pole versions (3000, 1500 and 1000 rpm), in both aluminium and cast-iron housings, and supplies it from İzmir to every province of Türkiye.
DRG Motor is a manufacturer, supplier and seller of electric motors. You can pick the speed and housing you need for 0.75 kW in the online electric motor shop, and see this power class alongside other models in the three-phase asynchronous electric motors category.
What does a 0.75 kW electric motor mean?
On the power scale, 0.75 kW is a practical step just above the entry level: strong enough to turn a single small machine, yet simple enough to need no special panel or high voltage. As it equals about 1 HP, buyers looking for a "1 HP electric motor" usually land here too. From small monobloc pumps to bench tools, from dosing and mixing units to small fans, this rating is enough in many places.
Let us separate one thing up front: "a 0.75 kW electric motor" is not a full order on its own. The same power exists in three speeds and two housing materials; the right choice depends on the speed your machine needs and the match of connection and dimensions.
Why is it one of the most available ratings?
The popularity of 0.75 kW is no accident. It is a standard step sitting on the IEC 80 frame and is the default drive of countless small machines in industry. Besides new builds, there is a steady demand to replace an ageing unit with the exact same dimensions. This regular demand makes it easy to keep the standard speed and housing options on hand, which shortens the time between order and dispatch. In short, being "easy to find" is the result of both a standard frame size and steady demand.
Speed options: 2, 4 and 6 poles
Speed is set by the number of poles. At 0.75 kW there are three standard speed classes; all deliver the same power but with different output characters and frame sizes:
- 2 poles / ~3000 rpm: High speed, low torque, for small pumps and fast-turning loads.
- 4 poles / ~1500 rpm: The most common balance; most fans, conveyors and general drives are here.
- 6 poles / ~1000 rpm: Low speed, relatively higher torque, for loads that should turn slowly and smoothly.
One detail to note: the 2- and 4-pole models come on the IEC 80 frame with a 19 mm shaft; the 6-pole model steps up one size to the IEC 90S frame and a 24 mm shaft. So choosing 1000 rpm also changes the foot and shaft dimensions.
| Model | Speed | Frame | Rated current (400 V) |
|---|---|---|---|
| DRG DRG-801-2 | 3000 rpm (2 poles) | IEC 80 | 1.64 A |
| DRG DRG-802-4 | 1500 rpm (4 poles) | IEC 80 | 1.75 A |
| DRG DRG-90S-6 | 1000 rpm (6 poles) | IEC 90S | 1.93 A |
The values are for the aluminium housing; the cast-iron equivalents carry the same electrical figures. If you are unsure which speed fits, describe your application in a few words and we will decide together by load type. For a first idea, see our electric motor calculator.
Click to see current electric motor prices and order nowSEE PRICES →
Aluminium or cast iron?
We offer 0.75 kW in two housing materials; the electrical values are identical, the difference is mechanical:
- Aluminium housing (such as DRG 802-4 aluminium): Light, easy to carry and mount. Favoured in small units that move often and where vibration is not critical.
- Cast-iron housing (such as DRG 802-4 cast iron): Heavier, more resistant to impact and vibration. Preferred in fixed installs and harsh environments.
Shaft and mounting dimensions are the same for both housings, so when replacing an existing machine you can choose the material freely to suit your need.
Voltage and 400 V connection
The 0.75 kW models are wired 230/400 V (Δ/Y). On the common 380–400 V three-phase supply these motors connect in star (Y). Their rated current at 400 V varies slightly with speed: about 1.64 A at 3000 rpm, 1.75 A at 1500 rpm and 1.93 A at 1000 rpm. These values are the starting point for thermal relay setting and cable sizing.
Size cables and protection to the real value on the motor nameplate; do not work under live power and leave the connection to authorised electrical staff. Our motor current chart helps with approximate current values.
Which machines use 0.75 kW?
In the field this rating appears mostly in: small centrifugal and gear pumps, booster sets, small extraction and ventilation fans, belt and screw conveyors, mixers and dosing units, packaging and feeding units, and small bench drives in wood or metal work. The common thread: a small-to-mid load, a smooth start and a premium on saving space. 0.75 kW fits that profile exactly.
Is 0.75 kW enough, or step to a neighbour rating?
Sometimes the real question is power. If your load is on the edge, look at the next step up, 1.1 kW; if it is very light, 0.55 kW makes sense. An undersized electric motor strains, heats up and trips its protection often; an oversized one is wasted space and outlay. When unsure, send us your application or get a first value with the calculator; you can see the neighbouring ratings side by side in the electric motor shop.
İzmir-based supply
DRG Motor is based in İzmir and delivers by cargo to all of Türkiye, including that city. At a common rating like 0.75 kW the standard speed and housing options are regularly available, so the supply flow to İstanbul, Ankara, Bursa, Konya or any province of Anatolia runs smoothly. We handle single purchases as well as the series needs of small machine builders through the same channel.
Choosing the right 0.75 kW model
Four pieces of information are enough to secure the choice:
- Speed: the speed your machine needs (3000, 1500 or 1000 rpm).
- Housing: aluminium or cast iron.
- Mounting and shaft: foot (B3), flange (B5/B14) or combined, plus shaft diameter.
- Voltage: your site supply (commonly 380–400 V three-phase).
With this you can select the right model in the electric motor shop and complete the order, and ask us wherever you hesitate. If you are replacing an existing unit, the most practical way is to send us the old electric motor nameplate.
Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp
See the current options and prices of the 0.75 kW electric motor in the shop.SEE PRICES
Frequently asked questions
How many HP is 0.75 kW?
0.75 kW is about 1 HP (1 HP ≈ 0.746 kW). Buyers looking for a "1 HP three-phase electric motor" are usually pointed to this power class.
Which speed should I choose?
Your machine sets the speed: 3000 rpm for fast-turning small pumps, 1500 rpm for general drives, 1000 rpm for a slow, smooth turn. If unsure, describe your application or check the calculator.
What does 230/400 V mean, can it run on a 380 V supply?
230/400 V (Δ/Y) means the motor connects in delta at 230 V and in star at 400 V. On the common 380–400 V three-phase supply it connects in star (Y). Make the correct connection per the nameplate and with authorised staff.
Is an aluminium housing weaker than cast iron?
No; both give the same electrical performance. Aluminium is lighter and easier to carry, cast iron is heavier and more resistant to impact and vibration. The choice follows your working environment.
Electric Motors Related to This Topic — Models and Current Prices
Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.
0.75 kW Three-Phase Motor 3000 rpm – DRG-801-2 Aluminium
- 0.75 kW · 3000 rpm (2 poles)
- Aluminium frame · IEC 80
- Shaft: 19 × 40 mm
0.75 kW Three-Phase Motor 1500 rpm – DRG-802-4 Aluminium
- 0.75 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 80
- Shaft: 19 × 40 mm
0.75 kW Three-Phase Motor 1000 rpm – DRG-90S-6 Aluminium
- 0.75 kW · 1000 rpm (6 poles)
- Aluminium frame · IEC 90S
- Shaft: 24 × 50 mm
0.75 kW Three-Phase Motor 3000 rpm – DRG-801-2 Cast Iron
- 0.75 kW · 3000 rpm (2 poles)
- Cast iron frame · IEC 80
- Shaft: 19 × 40 mm
0.75 kW Three-Phase Motor 1500 rpm – DRG-802-4 Cast Iron
- 0.75 kW · 1500 rpm (4 poles)
- Cast iron frame · IEC 80
- Shaft: 19 × 40 mm
0.75 kW Three-Phase Motor 1000 rpm – DRG-90S-6 Cast Iron
- 0.75 kW · 1000 rpm (6 poles)
- Cast iron frame · IEC 90S
- Shaft: 24 × 50 mm
















