A 0.75 kW three-phase electric motor is roughly 1 HP and the everyday workhorse behind light loads: small pumps, fans and short conveyors. DRG Motor offers this class as a manufacturer, supplier and seller; based in İzmir, we prepare your order without the wait and ship it fast to every province in Türkiye. Finding the right one is not only about power — the deciding factor is speed.
DRG Motor works across a 0.25 kW to 355 kW range, and 0.75 kW is one of its busiest links. Filter the electric motor that best fits your need by power and speed in our online electric motor shop, and see the whole class together in the three-phase asynchronous electric motors category.
Where is a 0.75 kW electric motor used?
This power class shows up wherever the job is "small but essential". The load is not heavy, yet it turns all day: a small centrifugal water pump, a workshop extractor or ventilation fan, a one- or two-metre belt conveyor, dosing and circulation pumps, a small mixer on a food line, display and decor mechanisms.
- Small centrifugal and circulation pumps
- Workshop extractor and duct fan
- Short belt conveyor and feeder unit
- Mixer, dosing and circulation units
- Bench and small-machine drive parts
The same 0.75 kW label fits all of these; the difference begins with how many revolutions it turns.
Click to see current electric motor prices and order nowSEE PRICES →
Same power, different speed: choosing the poles
Saying "I need a 0.75 kW electric motor" is half a sentence, because the same power comes at three speeds, set by the number of poles. A pump usually wants high speed; a conveyor or mixer wants lower speed and more torque. Torque follows T = 9550 · P / n and rises as speed drops, so the slower the motor, the more it "holds".
| Poles | Speed (rpm) | Model | Line current 400 V (A) |
|---|---|---|---|
| 2 | 3000 | DRG-801-2 | 1.64 |
| 4 | 1500 | DRG-802-4 | 1.75 |
| 6 | 1000 | DRG-90S-6 | 1.93 |
Applying the formula, 0.75 kW gives about 2.4 Nm at 3000 rpm, 4.8 Nm at 1500 rpm and 7.2 Nm at 1000 rpm. If your load is stiff at start-up, the lower-speed sibling is often the easier answer. Not sure which speed fits? Our electric motor calculator gives a first idea.
Aluminium or cast iron?
0.75 kW is ready in both bodies. An aluminium frame is light, easy to carry and mount, and handy on panels and moving rigs. Cast iron takes shocks and vibration better and suits rough industrial spots and fixed bases. Both come with 230/400 V three-phase supply, IP55 protection and class F insulation; the choice follows the character of the spot the motor will sit in.
What to settle for fast delivery
The secret to fast shipping is a correct order from the start. The biggest time waster in the field is a request that arrives with missing details. To send a 0.75 kW electric motor on its way without the wait, four points are enough:
- Speed: 3000, 1500 or 1000 rpm — whichever fits your job.
- Body: aluminium or cast iron.
- Mounting: foot (B3), flange (B5/B14) or combination; shaft diameter in this class runs 19 mm to 24 mm.
- Voltage: is your panel 400 V three-phase, star-delta start or direct.
If you have an old electric motor to replace, the quickest route is to photograph its nameplate and send it over; we will match the DRG equivalent of the same size together.
From İzmir to all of Türkiye
DRG Motor's physical base is in İzmir. From here we ship to every province, İzmir included, through our contracted carrier network. For a frequently requested power like 0.75 kW we prepare your request the day we receive it and try to dispatch it as soon as possible, without promising a fixed date. For bulk buys and project supply we set the delivery plan with you up front, so your line goes live without the wait.
Frequently asked questions
How many HP is 0.75 kW?
Since 1 HP is about 0.746 kW, 0.75 kW is roughly 1 HP. In the market this class is often asked for as a "1 HP electric motor".
What voltage does it run on?
0.75 kW models run on a 230/400 V three-phase supply with delta/star (Δ/Y) connection. On a 400 V panel they wire in star; at this small power, direct start rarely causes trouble.
Can I change the speed later?
The pole count is a fixed feature of the motor; changing speed for good means changing the model. If you need variable speed, plan for a drive (inverter) from the start.
How long does delivery take?
We do not promise a fixed day, because it depends on destination and volume. The right move is to pick the model and reach us: we will tell you the status and an estimate at once.
Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp
Not sure which 0.75 kW variant fits? Tell us the machine you will drive and, if any, the old nameplate; we will settle the speed, body and mounting together.
Pick your 0.75 kW electric motor by power and speed and check availability.SEE PRICES
Electric Motors Related to This Topic — Models and Current Prices
Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.
0.75 kW Three-Phase Motor 3000 rpm – DRG-801-2 Aluminium
- 0.75 kW · 3000 rpm (2 poles)
- Aluminium frame · IEC 80
- Shaft: 19 × 40 mm
0.75 kW Three-Phase Motor 1500 rpm – DRG-802-4 Aluminium
- 0.75 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 80
- Shaft: 19 × 40 mm
0.75 kW Three-Phase Motor 1000 rpm – DRG-90S-6 Aluminium
- 0.75 kW · 1000 rpm (6 poles)
- Aluminium frame · IEC 90S
- Shaft: 24 × 50 mm
0.75 kW Three-Phase Motor 3000 rpm – DRG-801-2 Cast Iron
- 0.75 kW · 3000 rpm (2 poles)
- Cast iron frame · IEC 80
- Shaft: 19 × 40 mm
0.75 kW Three-Phase Motor 1500 rpm – DRG-802-4 Cast Iron
- 0.75 kW · 1500 rpm (4 poles)
- Cast iron frame · IEC 80
- Shaft: 19 × 40 mm
0.75 kW Three-Phase Motor 1000 rpm – DRG-90S-6 Cast Iron
- 0.75 kW · 1000 rpm (6 poles)
- Cast iron frame · IEC 90S
- Shaft: 24 × 50 mm
















