When choosing an electric motor supplier for industry, the first thing to look at is not the price tag but how wide the partner's power range is, whether it offers the technical support to pin down the right model, how it handles replacement, and how fast it can deliver. As a manufacturer, supplier and seller of three-phase asynchronous electric motors, DRG Motor brings these four points together under one roof and, from its İzmir base, delivers fast to all of Turkey, İzmir included.
You can review the model that fits your need by power and speed in the online electric motor shop, and see the same products together in the three-phase asynchronous electric motors category.
What is the real question when picking a supplier?
When a machine needs a motor, most buyers look at a single number. Yet what hurts on site is an electric motor that arrives at the wrong speed, or a type you can no longer match six months later. What sets a good supplier apart is helping you pick the right one before the sale and making sure you are not left stranded after it.
So it helps to reduce the decision to concrete questions: Which powers and speeds can it cover without gaps? Is there someone to call when you are unsure? When a motor has to be replaced, how quickly can it supply the same size? Does delivery really reach your province fast? The sections below open exactly these four questions.
Is the power and speed range wide enough?
A plant never runs on a single power. On one line a 4 kW conveyor, a 7.5 kW fan and an 11 kW pump turn side by side. If the supplier's range is narrow, you chase a separate address for each item. DRG Motor's three-phase asynchronous electric motor range covers 0.25–11 kW in aluminium housing and 0.55–355 kW in cast iron; on the speed side there are 3000, 1500 and 1000 rpm options.
The table below samples a few of the most asked 1500 rpm (4-pole) aluminium steps in industry. Each model code links to its product page; the rated current at 400 V is given so you can discuss panel and overload selection in advance.
| Model | Power | Speed | Current (400 V) |
|---|---|---|---|
| DRG-112M-4 | 4 kW (5.5 HP) | 1500 rpm | 8 A |
| DRG-132S-4 | 5.5 kW (7.5 HP) | 1500 rpm | 10.7 A |
| DRG-132M-4 | 7.5 kW (10 HP) | 1500 rpm | 14.3 A |
| DRG-160M-4 | 11 kW (15 HP) | 1500 rpm | 20.4 A |
You can reach the full list for every power step and speed in the online electric motor shop. For an intermediate value not common in catalogues, say 10 kW, we point you to the nearest standard power (here 11 kW); this makes supply easier and keeps future replacement practical.
Click to see current electric motor prices and order nowSEE PRICES →
Is there technical support to pin down the model?
Choosing an electric motor rarely ends with power alone. If the mounting form (foot B3, flange B5/B14), shaft diameter, housing material and supply voltage do not line up, even the right power will not fit the machine. This is where the supplier's technical side matters: when unsure, can you describe your application and settle the right model together?
The case we meet most at the ordering stage is a technician with a motor to replace who cannot read the nameplate. That is normal. With a nameplate photo and a few dimensions we determine together which DRG model takes its place. This prevents the product from coming back on site because of a wrong speed or shaft diameter.
Delivery speed and reach
When a motor stops in a plant, what is lost is not the product but the halted production. So the supplier's location and shipping routine are among the most critical items on the list. DRG Motor is based in İzmir and ships to all of Turkey, İzmir included. Products leave quickly for industry-dense provinces such as Istanbul, Bursa, Kocaeli, Ankara, Konya and Gaziantep.
The sound approach is to discuss the delivery time before ordering. Once you have clarified which province, which carrier and when it ships, you plan around it. Rather than a numeric day promise, we prefer to share a realistic delivery schedule based on your request in advance.
Replacement: what happens when a motor fails?
Buying a motor today is easy; the real test begins two years later when you need another of the same size. If the supplier's range is consistent, finding a replacement in the same housing and shaft size is effortless. That is why it matters that the model you pick at first purchase sits on a step the supplier keeps available.
At DRG Motor both aluminium and cast iron housing options come with IP55 protection and class F insulation. When replacement is needed, just share the current motor's code or nameplate; we determine the same-size product or its nearest match together.
Are manufacturer, supplier and seller the same address?
The more links in the supply chain, the more information breaks. If the maker and the seller are separate, and the one who delivers differs from the one you deal with, everyone points at someone else when a problem arises. DRG Motor carries these three roles together: manufacturer, supplier and seller. From order to delivery and after-sales, you proceed with one contact.
This wholeness makes single-source supply easier, especially for businesses that need many electric motors at different powers at once. You can send a project list to one address and track every item with the same person.
Information to settle before ordering
- Power and speed: decide how many kW and rpm (2/4/6 poles) you need.
- Housing and mounting: aluminium or cast iron; foot (B3) or flange (B5/B14).
- Shaft and voltage: note the shaft diameter and supply voltage.
- If replacing: prepare a photo of the current motor's nameplate.
- Delivery: share the province and desired schedule up front.
If unsure, let us settle it together first
If you have an electric motor to replace or just a machine name, the fastest route is a short message. With a nameplate photo, power, speed and mounting details we settle the right DRG model together. This small first step lowers the risk of a wrong choice from the start.
Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp
To see electric motor prices by power and speed and request a quoteSEE PRICES
Frequently asked questions
What should I look at first in an industrial electric motor supplier?
Look at the breadth of the power and speed range, the technical support to pin down the right model, the replacement capability and the delivery speed. If these four hold, you do not have to decide on a single number.
I do not know the details of the motor to replace, can we still choose?
Yes. Share a photo of the current motor's nameplate and a few dimensions; from power, speed, housing and shaft diameter we determine the right DRG model together.
Can I buy many motors at different powers from one place?
You can. With 0.25–11 kW in aluminium and 0.55–355 kW in cast iron the range is wide; you can send a project list to one address and proceed with one contact.
Which provinces do you deliver to?
DRG Motor is based in İzmir and ships to all provinces, İzmir included. You can settle the delivery schedule together before ordering.
Electric Motors Related to This Topic — Models and Current Prices
Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.
4 kW Three-Phase Motor 1500 rpm – DRG-112M-4 Aluminium
- 4 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 112M
- Shaft: 28 × 60 mm
5.5 kW Three-Phase Motor 1500 rpm – DRG-132S-4 Aluminium
- 5.5 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 132S
- Shaft: 38 × 80 mm
5.5 kW Compact Three-Phase Motor 1500 rpm – DRG-112M-4K Aluminium
- 5.5 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 112M
- Shaft: 28 × 60 mm
7.5 kW Three-Phase Motor 1500 rpm – DRG-132M-4 Aluminium
- 7.5 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 132M
- Shaft: 38 × 80 mm
11 kW Three-Phase Motor 1500 rpm – DRG-160M-4 Aluminium
- 11 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 160M
- Shaft: 42 × 110 mm
11 kW Compact Three-Phase Motor 1500 rpm – DRG-132M-4K Aluminium
- 11 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 132M
- Shaft: 38 × 80 mm
















