Ordering an electric motor really starts with three questions: how much power, how many rpm, which mounting? Get those straight and the rest is a short exchange. Below we walk the process in order, from reading the old nameplate to planning delivery.
The short route, if you are in a hurry: photograph the nameplate, describe your application in two lines, and we pin down the right model together. You can also start straight away by power in the online electric motor shop.
What should you have ready before ordering?
The biggest time sink in the field is starting an order with missing information. When you ask for an electric motor, gather these four: power (kW), speed (rpm or pole count), housing preference and mounting type. Most of these are already printed on the motor you want to replace.
If you are buying a motor for a new machine, the values given by the machine builder guide you. Even if a single item is uncertain, asking beats guessing every time.
The fastest route: photograph the nameplate
If you are swapping an existing motor for a new one, there is no need to write out long dimensions. Take a clear shot of the metal plate on the side of the motor; power, speed, voltage, connection and frame size are written there. In most orders this single photo settles half the model on its own.
If the plate is worn and unreadable, no panic. Measure the shaft diameter and length, the foot hole spacing or the flange diameter; these few figures lead to the frame size. Checking the shaft diameter without removing a coupling or pulley can be awkward, so make sure the power is off while measuring and have a qualified person do the work.
Click to see current electric motor prices and order nowSEE PRICES →
Matching power and speed correctly
Speed matters as much as power, because the same power at a different speed does a quite different job. Roughly: 2-pole around 3000 rpm (fast, pumps and compressors), 4-pole 1500 rpm (the most common, general drive), 6-pole 1000 rpm (slower, torque-led jobs). Saying "I need a motor" is not enough on an order; saying "1500 rpm" makes it clear.
The table below samples a few of the most asked 1500 rpm (4-pole) aluminium models. Each row links to its product page, where you can also see speed and housing alternatives:
| Model | Power | Speed | Shaft |
|---|---|---|---|
| DRG-112M-4 | 4 kW (5.5 HP) | 1500 rpm | 28x60 mm |
| DRG-132S-4 | 5.5 kW (7.5 HP) | 1500 rpm | 38x80 mm |
| DRG-132M-4 | 7.5 kW (10 HP) | 1500 rpm | 38x80 mm |
| DRG-160M-4 | 11 kW (15 HP) | 1500 rpm | 42x110 mm |
If you are after a non-standard power (say "10 kW"), we usually point you to the nearest standard step, 11 kW. That makes both supply and future spares easier. You can filter every step by power in the online shop, and see the same products together in the three-phase asynchronous electric motors category.
Do not skip the mounting type
The most forgotten item on orders is the mounting form. Will the motor bolt by its feet (B3), by a flange (B5/B14), or both? At the same power and speed, a motor that arrives with the wrong mounting will not seat on the machine. For motors going onto a gearbox input or a pump, settle this detail up front.
Housing material comes in here too. An aluminium housing is light and easy to carry and mount; cast iron is chosen for tougher conditions. We can decide which suits your job by assessing the application together. DRG Motor offers both housings with IP55 protection and class F insulation.
Model choice and the quote stage
Once the information is gathered, there are two paths. If you are sure of what you want, pick the model in the online electric motor shop and proceed directly. If there is a point of doubt, describe your application and we determine the right model together. Because DRG Motor carries the roles of manufacturer, supplier and seller, selection, ordering and delivery run through one contact.
The same method works for project-type lists, where several motors are bought together: send the list in one go and we clarify the power steps together and gather them into one quote.
Confirming the order and delivery
Once the model is confirmed, delivery is next. DRG Motor is based in İzmir and ships across all of Turkey, İzmir included. Clarifying the delivery address, any invoicing details and the delivery schedule during the order helps the product reach the right place on time. Discussing shipping details in advance lets you fit a delivery window to your plan.
The most common ordering mistakes
- Giving only the power and skipping the speed: "4 kW" is not enough, "4 kW 1500 rpm" is needed.
- Not stating the mounting type: foot or flange, if not settled up front the product may not seat on the machine.
- Ordering by guesswork without reading the nameplate: on a swap the motor's own plate is the soundest source.
- Overlooking the shaft diameter: the same frame can carry different shaft sizes, and the coupling/pulley depends on it.
Share the nameplate for a quote
The most practical start is to send a photo of the current motor's nameplate plus a few dimensions. Even with that much we can largely determine the suitable DRG model; the risk of picking the wrong power or speed drops from the outset.
Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp
To open the electric motor list by power and speed and request a quoteSEE PRICES
Frequently asked questions
What is the minimum information needed to order?
Power (kW), speed (rpm) and mounting type are a sufficient start. If you are replacing a motor, a photo of its nameplate gives most of the information in one go.
I cannot read the nameplate, can I still order?
Yes. From a few figures such as shaft diameter/length, foot hole spacing or flange diameter we can derive the frame size. Make sure the power is off while measuring and have a qualified person do the work.
What if the power I want is not listed?
For non-standard values we suggest the nearest standard step, for example 11 kW instead of 10 kW. This is more practical for supply and future spares.
Which provinces do you deliver to?
DRG Motor is based in İzmir and ships to all of Turkey, İzmir included. You can confirm the delivery schedule during the order.
Electric Motors Related to This Topic — Models and Current Prices
Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.
4 kW Three-Phase Motor 1500 rpm – DRG-112M-4 Aluminium
- 4 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 112M
- Shaft: 28 × 60 mm
5.5 kW Three-Phase Motor 1500 rpm – DRG-132S-4 Aluminium
- 5.5 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 132S
- Shaft: 38 × 80 mm
5.5 kW Compact Three-Phase Motor 1500 rpm – DRG-112M-4K Aluminium
- 5.5 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 112M
- Shaft: 28 × 60 mm
7.5 kW Three-Phase Motor 1500 rpm – DRG-132M-4 Aluminium
- 7.5 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 132M
- Shaft: 38 × 80 mm
11 kW Three-Phase Motor 1500 rpm – DRG-160M-4 Aluminium
- 11 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 160M
- Shaft: 42 × 110 mm
11 kW Compact Three-Phase Motor 1500 rpm – DRG-132M-4K Aluminium
- 11 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 132M
- Shaft: 38 × 80 mm
















