The first condition for shipping an electric motor abroad, or sourcing one from across the border, is that the product fits the target grid and the dimensional habits of that market. As a manufacturer, supplier and seller of IEC three-phase asynchronous electric motors, DRG Motor sets up this compatibility at the ordering stage and, from its İzmir base, plans shipments for both domestic and overseas supply requests.
You can review the electric motor that best fits your need by power and speed in the online electric motor shop, and see the same products together in the three-phase asynchronous electric motors category.
Why the IEC frame is decisive in export
For whoever fits an electric motor to a machine on the other side of the border, the key question is "will it fit?" The IEC frame size works here like a shared language. Frame codes such as 112M, 132S and 160M tie the shaft centre height, foot hole spacing, flange diameter and shaft size to a standard framework. This means an overseas buyer who knows the mounting dimensions of their machine can verify the right frame on their own side too.
In practice: when ordering, sharing not just the power but also the frame size, the mounting type (foot B3, flange B5/B14) and the shaft diameter speeds things up. Because DRG Motor's three-phase asynchronous electric motors are built to the IEC framework, matching a replacement in overseas supply relies far less on guesswork.
Click to see current electric motor prices and order nowSEE PRICES →
A different grid: voltage and frequency
No two countries have the same grid. Voltage level and frequency directly affect which connection an exported electric motor will run on. DRG Motor's models of 4 kW and above are wound for 400/690 V with delta (Δ) and star (Y) connections, which gives flexibility to connect the same product to different voltage levels. Models up to 3 kW use a 230/400 V connection.
On the frequency side the point is clear: the nameplate speed refers to a 50 Hz grid, and on a grid of a different frequency the running speed and behaviour change. That is why, for an overseas order, the target grid's frequency (50 or 60 Hz) and voltage should be settled from the start. The table below gives, from the mid-power steps most often asked about in export, a few 1500 rpm (4-pole) aluminium models with their connection detail:
| Model | Power | Voltage / connection | Speed |
|---|---|---|---|
| DRG-112M-4 | 4 kW | 400/690 V (Δ/Y) | 1500 rpm |
| DRG-132S-4 | 5.5 kW | 400/690 V (Δ/Y) | 1500 rpm |
| DRG-132M-4 | 7.5 kW | 400/690 V (Δ/Y) | 1500 rpm |
| DRG-160M-4 | 11 kW | 400/690 V (Δ/Y) | 1500 rpm |
You can reach the full list of power steps and cast-iron options in the online electric motor shop. If the target market's voltage/frequency expectation is not clear to you, we can assess the application together and determine the most suitable connection.
Housing choice, climate and transport
In overseas supply, the housing choice is considered not only for durability but also for transport cost and arrival conditions. Aluminium-housing electric motors are light; this reduces the weight burden on long-distance shipping and makes handling easier. Cast-iron-housing electric motors are aimed at tougher operating conditions and higher powers, offering a structure more resistant to mechanical impact and harsh environments.
The climate of the destination country also shapes the choice. For an electric motor heading to a humid or dusty site, the protection class comes to the fore; DRG Motor provides both housing types with IP55 protection and class F insulation. If you describe where it will be used, we can clarify together which housing suits your route and site.
Export packaging and shipping
An electric motor travels a long way from the plant to a site in another country, and on that journey the packaging matters as much as the product. In sea freight, moisture and salt are the main risks; by road, vibration and stacking are. Preventing impact to the shaft and terminal box, and keeping the product from shifting through palletising and securing, are inseparable parts of the shipping plan.
The technical documents travelling with the shipment also ease the process: the product label, dimensional data and connection diagram speed up the work of the installation team on the other side. For overseas supply requests, DRG Motor shares the product documents and dimensional data before ordering, so uncertainty is kept to a minimum on both the customs and the installation side. It is healthiest to plan documents and shipping details together, according to the size of the request.
Choosing the right model together for overseas supply
Whether you are replacing an existing electric motor or looking for one for a new machine, the fastest route is to define the need from the start: power (kW), speed (rpm), frame size, mounting type, and the target grid's voltage and frequency. If you have a motor to replace, a photo of its nameplate and a few dimensions are often enough for a correct match.
When you share this information, we determine the suitable DRG model and connection type together and plan the shipment according to your route. The risk of choosing the wrong voltage or wrong frame is thus reduced from the outset.
Send a photo of your current motor nameplate and we will find the suitable DRG model together.Send on WhatsApp
For your overseas supply and export requests, see the electric motor list by power and speed and request a quoteSEE PRICES
Frequently asked questions
Does DRG Motor ship electric motors abroad?
DRG Motor is a manufacturer, supplier and seller of three-phase asynchronous electric motors and considers overseas supply requests. You can settle the route and shipping details together before ordering.
Is it suitable for a grid of different voltage and frequency?
On voltage, models of 4 kW and above suit a 400/690 V Δ/Y connection; up to 3 kW it is 230/400 V. Because frequency (50/60 Hz) affects the running speed, you should state the target grid at the ordering stage.
How is it packaged for export?
Palletising, securing and shaft/terminal-box protection are planned according to the shipping method. On humid routes, protective measures come to the fore; we discuss the details together based on the size of the request.
How do I determine the right model?
Share the power, speed, frame size, mounting type and the target grid's voltage/frequency; if there is an existing motor, send a photo of the nameplate and we determine the suitable model together.
Electric Motors Related to This Topic — Models and Current Prices
Suitability is not decided by power alone: compare the speed, voltage, mounting, shaft and fixing dimensions of your machine with the product data; if unsure, send us the nameplate of your current motor.
4 kW Three-Phase Motor 1500 rpm – DRG-112M-4 Aluminium
- 4 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 112M
- Shaft: 28 × 60 mm
5.5 kW Three-Phase Motor 1500 rpm – DRG-132S-4 Aluminium
- 5.5 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 132S
- Shaft: 38 × 80 mm
5.5 kW Compact Three-Phase Motor 1500 rpm – DRG-112M-4K Aluminium
- 5.5 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 112M
- Shaft: 28 × 60 mm
7.5 kW Three-Phase Motor 1500 rpm – DRG-132M-4 Aluminium
- 7.5 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 132M
- Shaft: 38 × 80 mm
11 kW Three-Phase Motor 1500 rpm – DRG-160M-4 Aluminium
- 11 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 160M
- Shaft: 42 × 110 mm
11 kW Compact Three-Phase Motor 1500 rpm – DRG-132M-4K Aluminium
- 11 kW · 1500 rpm (4 poles)
- Aluminium frame · IEC 132M
- Shaft: 38 × 80 mm
















