Mardin, with its textile and food processing facilities, cement and building material production and broad agricultural irrigation infrastructure, is one of the production hubs of the southeast. The price of the electric motors used in pump, fan and mill drives at these facilities is not a single list figure; power, speed and frame determine the cost.

Motor Use in Mardin Industry

Irrigation pumps and conveyors on cement lines require S1-duty motors that run under constant load. In the dusty cement environment, an IP55 rating and a cast iron body protect the motor from both contaminants and vibration. For agricultural irrigation, 4-pole 1500 rpm motors are the most common choice.

Factors That Set the Price

A motor's cost is set first by its power (0.55-355 kW), then by speed, that is the pole count. At the same power, a 6-pole motor is bulkier and costlier than its 2-pole counterpart. Standards such as a cast iron body, IP55 protection and F-class insulation are each a separate cost item, so a concrete figure only emerges once the requirement is clear.

Efficiency Class and the Long Term

An IE3 Premium motor has a higher purchase price than an IE1 equivalent but consumes less energy in continuous operation. In Mardin's hot climate, high ambient temperature also affects motor choice; the thermal reserve of F-class insulation provides a safe margin in these conditions. Judge the price by lifetime cost, not the label alone.

A DRG Motor Quotation in Mardin

İzmir-based supplier DRG Motor delivers motors from 0.55 to 355 kW, suited to a 400 V / 50 Hz supply, to facilities in and around Mardin. For an exact price list, share the power, speed, mounting type and frame material you need to receive a current quotation.