A high kW AC electric motor in Izmir covers the three-phase asynchronous motors chosen to meet the heavy power demand of port logistics, organised industrial zones and large production lines. Crushers, compressors and pump sets running in the Kemalpaşa, Torbalı and Pancar industrial basins frequently call for power ratings above 30 kW.

Selecting Power and Speed in High kW Motors

On a 400 V / 50 Hz supply the speed is set by the number of poles: 2 poles give 3000 rpm, 4 poles 1500 rpm and 6 poles 1000 rpm. Conveyors and crushers that demand high torque favour 6-pole models, while fans and centrifugal pumps suit 2- and 4-pole versions. In this segment DRG Motor offers a broad range from 30 kW up to 355 kW.

Cast Iron Frame and Cooling

For high power ratings a cast iron frame is preferred; it damps vibration and spreads heat, protecting the bearings under continuous load. The IP55 protection rating resists dust and splashing water, while Class F insulation lets the windings run safely at high temperature. The S1 continuous duty rating suits plants that turn around the clock through every shift.

Efficiency Class and Operating Cost

Because high kW motors run long hours, choosing the IE3 Premium or IE4 Super Premium efficiency class makes a clear difference on the energy bill. Under IEC 60034-30-1, losses fall as the efficiency class rises, and at large ratings this gap adds up to many kWh per year. Over the motor's life, the energy cost far exceeds the purchase price.

Sourcing DRG Motor in Izmir

The Izmir-based supplier DRG Motor supplies high kW AC motors in B3 foot-mounted, B5 flange-mounted and B14 face-mounted versions, from stock or on a short lead time. Share your plant's power, speed and frame requirements and our team will prepare a current quotation for the best-matched model.