Bilecik, and particularly the Bozüyük district, is tied to Marmara's manufacturing base through its ceramic, refractory and marble-processing plants. In these facilities, mills, press lines, conveyors and pump sets run largely on electric motors. A well-matched motor means both uninterrupted production and a lower electricity bill.

Motor Load in Bilecik Industry

In ceramic plants, raw-material mills and drying fans run all day under an S1 continuous-duty regime. For such heavy, dusty environments, IP55 ingress protection and Class F insulation keep the motor safe from moisture and dust. A cast iron housing damps vibration and extends bearing life.

Efficiency Class and Energy Cost

The IEC 60034-30-1 standard rates motors from IE1 up to IE5. On a continuously running mill, choosing an IE4 Super Premium unit over IE3 Premium meaningfully cuts losses over the years. The efficiency gap may look small, but on a motor running 8,000 hours at full load the total saving adds up considerably.

Speed and Mounting Choice

On a 400 V / 50 Hz supply, a 4-pole motor delivers 1,500 rpm and a 6-pole motor 1,000 rpm synchronous speed. Conveyors and mixers favour low speed, while fans use 2 or 4 poles depending on the duty. For mounting, foot-mounted B3 suits general use and flange-mounted B5 fits a pump coupling.

DRG Motor Supply in Bilecik

İzmir-based supplier DRG Motor delivers IE3, IE4 and IE5 motors from 0.55 to 355 kW to businesses in Bilecik. Share the power, speed and mounting type of your application and we will determine the most suitable motor and lead time together.