
Electric Motor Selection for Fan and Blower Systems
Fans and blowers move air in a wide range of applications such as ventilation, cooling, dust extraction and smoke evacuation. Whether these systems run quietly, efficiently and con... More Details

Fans and blowers move air in a wide range of applications such as ventilation, cooling, dust extraction and smoke evacuation. Whether these systems run quietly, efficiently and con... More Details

An axial fan motor is not a special type of motor: it is a standard three-phase induction motor that drives the axial impeller and is chosen according to the fan’s shaft power, spe... More Details

A cabinet (cell-type) fan is a centrifugal fan installed inside a sheet-metal cabinet; inside the cabinet there is either a double-inlet scroll fan, usually belt driven, or a housi... More Details

In a duct-type axial fan the motor sits in the middle of the cylindrical casing and runs inside the air the fan is moving; the impeller is mounted directly on the motor shaft. So c... More Details

A car park jet fan motor is chosen according to the thrust (in newtons) the fan must produce and the mode it will run in: a 400 mm jet fan blowing air at 22 m/s delivers about 73 N... More Details

When you replace a burner fan motor, two conditions must be met together: the new motor must cover the fan's shaft power, and its speed must be in the same pole class as the old mo... More Details

When the motor of a wall-mounted axial fan burns out, it can be replaced by a standard three-phase motor of the same power, speed, shaft size and mounting, provided the old one is ... More Details

The motor of a duct fan is handled in one of two ways, depending on the fan's size: most small duct fans for circular and rectangular ducts have a motor built into the impeller, so... More Details

There is no separate motor type called a “reversible fan motor”: the motor driving a reversible axial fan is a standard three-phase induction motor, and it turns the other way when... More Details

A tangential fan (cross-flow fan) uses a long cylindrical impeller that draws air in along its whole length and blows it out along that same length as a wide, flat jet; it is found... More Details