A plant's motor fleet usually spans a wide range, from small 0.55 kW drives to 355 kW main units. New-generation motors offer higher efficiency and lower running temperature across this entire range, bringing machines of different powers under a single supply approach. DRG Motor supplies along this band from low to high power.

Priorities on the Low-kW Side

Small motors between 0.55 and 7.5 kW are used in large numbers in pumps, fans and small conveyors. Here an aluminium or cast iron housing, IP55 protection and the right speed choice come to the fore; the efficiency class of many small motors determines total electricity consumption.

Priorities on the High-kW Side

In large motors of the 75–355 kW band, cast iron housing, high torque and thermal endurance are decisive. Impact and continuous loads such as crushers, main pumps and mills call for a strong breakdown-torque margin and a structure suited to S1 continuous duty.

The New-Generation Efficiency Architecture

Low-loss silicon steel, an optimised winding and a precise air gap raise the IEC 60034-30-1 efficiency classes in both small and large motors. Class F insulation and IP55 protection are standard across the whole band, keeping a single line of quality.

The Whole Power Range from One Supplier

Meeting low- and high-kW needs from one supplier simplifies spare-part and service continuity. DRG Motor supplies from 0.55 to 355 kW in IE3, IE4 and IE5 classes; we can plan your plant's entire motor requirement, with pole count and housing type, from İzmir.